I want a Kerker

  • 9am53
  • Offline
  • User
  • homebrew, and some bbq
More
20 Feb 2010 09:15 #349301 by 9am53
Replied by 9am53 on topic I want a Kerker
Old Man Rock wrote:

"The folks in California are already going through this with CARB."... Gee, go figure... :whistle:

Now before you Cali boys get all riled up, remember, I was born and raised there... :P :laugh:

MOre reasons to just make our own... Screw uhm...


What's taking so long old man??

Please Log in or Create an account to join the conversation.

More
20 Feb 2010 09:20 #349302 by Old Man Rock
Replied by Old Man Rock on topic I want a Kerker
Had all the research to accomplish first hand.... Wanted to make sure I had the right ideas & formulas down to what was required in such a task...

Soon.... soon Grasshopper.... ;)

OMR

1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

More
20 Feb 2010 09:55 #349305 by otakar
Replied by otakar on topic I want a Kerker
roy-b-boy-b wrote:

I'll be tuned in !! :laugh:

Here is my old kerker and Mac. I actually slipped the Kerker over the Mac. Roy



If you do that enough they might have babies and you will get a new one. :woohoo:

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

More
20 Feb 2010 10:01 - 20 Feb 2010 10:08 #349306 by otakar
Replied by otakar on topic I want a Kerker
Old Man Rock wrote:

"The folks in California are already going through this with CARB."... Gee, go figure... :whistle:

Now before you Cali boys get all riled up, remember, I was born and raised there... :P :laugh:

MOre reasons to just make our own... Screw uhm...


Studies have shown that "Headers cause cancer in the state of California" :whistle: :laugh:

One thing I like about the MAC and old Yoshi, is that they're nowhere as loud as the other megaphone pipes.

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 20 Feb 2010 10:08 by otakar.

Please Log in or Create an account to join the conversation.

  • muddy1
  • Offline
  • User
  • 1980 Kz1000 LTD B4
More
20 Feb 2010 15:03 #349323 by muddy1
Replied by muddy1 on topic I want a Kerker
I thought that's the reason we ditched the stock pipes, to make our machines loud with the megaphone style exhaust.....

1970 SL-70
1972 CB 750
1973 Z1
1976 YZ 125
1976 KZ400
1979 KZ400 LTD
1980 KZ1000 LTD B4
1984 YZ 490
1989 750 Ninja

Please Log in or Create an account to join the conversation.

More
20 Feb 2010 16:19 #349334 by otakar
Replied by otakar on topic I want a Kerker
There is a difference between "loud" and "Cool" You know those little noise makers they put on these little Honda Civics to make them sound COOL. Well- to me they are loud but sound stupid. Now headers and flow-threws on a American V8 sounds Cool. :woohoo:

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

More
20 Feb 2010 19:35 #349361 by Old Man Rock
Replied by Old Man Rock on topic I want a Kerker
And in most of those cars with the larger exhaust canisters.... Are they louud well yes indeed, are they any faster, we no not at all...

I just laugh my ass off when I sent like a ford escort with noise, reving it up and it's going the same speed as it was..... :S

Then I always say to myself, yup, that's one mighty fine race car you have there.... AT 45mph mind you....:blink: :laugh: :laugh: :laugh:

1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

More
20 Feb 2010 21:04 #349379 by Patton
Replied by Patton on topic I want a Kerker
Old Man Rock wrote:

...laugh my ass off when I sent like a ford escort with noise, reving it up and it's going the same speed as it was....


Have laughed for years about HD riders turning up the throttle "volume" control and nothing much else happens. :lol:

Good Luck! :)

1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

More
21 Feb 2010 07:54 #349428 by otakar
Replied by otakar on topic I want a Kerker
That Is why I like The early Yoshies and MACs, They have a nice crisp sound to them. They make a low compression motor sound like it has 12.5:1s in it. This is as close as I can get. This is the new Japanese built Yoshi.

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

More
21 Feb 2010 08:01 #349431 by otakar
Replied by otakar on topic I want a Kerker
This is what it sounds like without the baffle. This is the real McCoy. These two guys are really good. There are two bikes in this one is a KZ and one is a twin of some sorts. The KZ has a Yoshi.

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

More
21 Feb 2010 08:02 #349434 by otakar
Replied by otakar on topic I want a Kerker
Here is another PERIOD Yoshi with no baffle. This video was when I fell in love with the Yoshi@ Brand

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

More
21 Feb 2010 08:27 #349439 by otakar
Replied by otakar on topic I want a Kerker
Here is a fully baffled MAC on a KZ750.

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum