Building a GPZ1150 from a CSR1000

Replied by otakar on topic Building a GPZ1100 from a CSR1000

I have been very bussy this week at work so I did not have the time to post the pictures yet. I have quite a few pictures of this conversion process which I will post this weekend. It is so simple "A caveman could do it"

---

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Replied by Bad Kaw on topic Building a GPZ1100 from a CSR1000

me too.

---

78 Kawasaki Z1R
81 Kawasaki KZ1000J (mods)
82 Kawasaki ELR Clone (1000 J)
82 Kawasaki KZ750R1/GPz750 ELR-ed
70 Kawasaki KV75
83 Honda CB1100F (few mods)
79 Suzuki GS1000 (rolling frame / project / junk)
84 Suzuki GS1150ES (modified project)
83 Yamaha XJ900R (project / junk)

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Replied by otakar on topic Building a GPZ1100 from a CSR1000

Well guys, here are the pictures of the mods for the tail section and the seat. I have started riding her, this last Monday to and from work for the first time since I bought her and started this article.

The first thing that must be done is to make a bracket to mount the back of the tail to the tail light.

---

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

Replied by otakar on topic Building a GPZ1100 from a CSR1000

Here is another angle of the bracket.

---

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

Replied by otakar on topic Building a GPZ1100 from a CSR1000

The tail is captured between the tail light back plate and the bracket.
Here is another angle.

---

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

Replied by otakar on topic Building a GPZ1100 from a CSR1000

This is what it looks like from the inside.

---

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

Replied by otakar on topic Building a GPZ1100 from a CSR1000

Now for the front mounts. These are made from one inch steel strip stock bought at Home Depot. There is a nut e-poxied to the back and than the whole assembly is taped for the 5mm bolt. The assemlies are shaped on a belt sander and than tacked on with "JB Quick". They are held in place with the tail bolted to them while they harden in place.

---

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

Replied by otakar on topic Building a GPZ1100 from a CSR1000

Another angle, after about fifteen minutes and the JB completely hardened so the tail could be removed. The epoxied nut can be seen between the plate steel and the frame. Inside the blob of JB Quick.

---

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

Replied by otakar on topic Building a GPZ1100 from a CSR1000

A better angle of viue. Wit tail removed, still only tacked on.

---

74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.