OMR's 1978 KZ1000-B2 LTD
- Old Man Rock
- Topic Author
- Offline
- User
- Posts: 6224
- Thanks: 225
OMR's 1978 KZ1000-B2 LTD
15 Nov 2009 14:37 - 15 Nov 2009 14:46
OMR gives birth to a bouncing new baby girl...
Isn't she just so gorgeous.... :blink:
Ok, not so much now for all new born look like aliens when they come out.... But she's a healthy baby girl...
For the most part, just clean up, elbow grease, buffing, painting, minor electrical re-wiring, brake lines & caliper rebuild, tires, carb rebuild kits, chain & sprockets and tune up....
For the engine, stock cams and build especially since odometer displays 10K miles... I realize this may not be accurate but with compression & leak down tests and a peak at the piston tops may just get lucky.... Not too mention it didn't smoke when started...
I kept all the good parts (speedo/tach cluster, tail fender, Mik 26mm carbs etc...) off my KZ900 build and low & behold, direct swap outs! Sweet!
Coils are cracked but work... No matter though, Dyna S coils and ignition for this old girl...
Going to keep her stock for a cruiser with the wife... Nice soft LTD seat with a back rest to enjoy the cruise....
Here she is.... Welcome the new baby to the OMR family....
Isn't she just so gorgeous.... :blink:
Ok, not so much now for all new born look like aliens when they come out.... But she's a healthy baby girl...
For the most part, just clean up, elbow grease, buffing, painting, minor electrical re-wiring, brake lines & caliper rebuild, tires, carb rebuild kits, chain & sprockets and tune up....
For the engine, stock cams and build especially since odometer displays 10K miles... I realize this may not be accurate but with compression & leak down tests and a peak at the piston tops may just get lucky.... Not too mention it didn't smoke when started...
I kept all the good parts (speedo/tach cluster, tail fender, Mik 26mm carbs etc...) off my KZ900 build and low & behold, direct swap outs! Sweet!
Coils are cracked but work... No matter though, Dyna S coils and ignition for this old girl...
Going to keep her stock for a cruiser with the wife... Nice soft LTD seat with a back rest to enjoy the cruise....
Here she is.... Welcome the new baby to the OMR family....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Attachments:
Last edit: 15 Nov 2009 14:46 by Old Man Rock.
Please Log in or Create an account to join the conversation.
- Old Man Rock
- Topic Author
- Offline
- User
- Posts: 6224
- Thanks: 225
Re: OMR's 1978 KZ1000-B2 LTD
15 Nov 2009 14:38
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Attachments:
Please Log in or Create an account to join the conversation.
- Old Man Rock
- Topic Author
- Offline
- User
- Posts: 6224
- Thanks: 225
Re: OMR's 1978 KZ1000-B2 LTD
15 Nov 2009 14:38
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Attachments:
Please Log in or Create an account to join the conversation.
- Old Man Rock
- Topic Author
- Offline
- User
- Posts: 6224
- Thanks: 225
Re: OMR's 1978 KZ1000-B2 LTD
15 Nov 2009 14:39
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Attachments:
Please Log in or Create an account to join the conversation.
- keith1
- Offline
- User
- Posts: 1729
- Thanks: 2
Re: OMR's 1978 KZ1000-B2 LTD
15 Nov 2009 14:44
Old Man Rock wrote:
cool..... a man after my own heart.....you ll like cruising that one 2-up.......
cool..... a man after my own heart.....you ll like cruising that one 2-up.......
Please Log in or Create an account to join the conversation.
- arai59
- Visitor
Re: OMR's 1978 KZ1000-B2 LTD
15 Nov 2009 14:48
Nice Dave ! If your real nice to me and kiss my big toe.....I might paint her for ya. Thats if you got the coin.:laugh:
Please Log in or Create an account to join the conversation.
- roy-b-boy-b
- Offline
- User
- Posts: 3255
- Thanks: 103
Re: OMR's 1978 KZ1000-B2 LTD
15 Nov 2009 14:53
How Much?
If you need bits and pieces i might have some you need. Roy
If you need bits and pieces i might have some you need. Roy
1979 LTD Street Fighter.1977 KZ1000
Please Log in or Create an account to join the conversation.
- Old Man Rock
- Topic Author
- Offline
- User
- Posts: 6224
- Thanks: 225
Re: OMR's 1978 KZ1000-B2 LTD
15 Nov 2009 14:55
Appreciate the offer but as always, I desire to accomplish everything I can myself....
Dupli-Color & automotive clear coat baby.... :woohoo:
I already have a line on the decals but I think I may just paint the silver with red pin stripe on the tank, side covers and tail section....
I've gotten pretty good at it now and still to the untrained eye, they still can't believe it's can paint...
My 900 paint has held up phenomenally well even in the AZ heat... Gas no problem due to non can clear coat so good to go....
Dupli-Color & automotive clear coat baby.... :woohoo:
I already have a line on the decals but I think I may just paint the silver with red pin stripe on the tank, side covers and tail section....
I've gotten pretty good at it now and still to the untrained eye, they still can't believe it's can paint...
My 900 paint has held up phenomenally well even in the AZ heat... Gas no problem due to non can clear coat so good to go....
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter
Phoenix, Az
Please Log in or Create an account to join the conversation.
- PLUMMEN
- Offline
- User
- Posts: 8139
- Thanks: 104
Re: OMR's 1978 KZ1000-B2 LTD
15 Nov 2009 15:10
wrong speedo there sunshiney one! ill give ya $401.00 as it sits :laugh:
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- jordan
- Offline
- User
- Posts: 965
- Thanks: 5
Re: OMR's 1978 KZ1000-B2 LTD
15 Nov 2009 15:11
very nice find OMR. Good to see you got another one in the stable
KZ810 streetfighter kz/gpz/gsxr
1983 gs1100e
1979 KZ 1000 1428 dragbike project
1974 kawasaki H1 500 sold
1972 Kawasaki s2 350-parted on ebay
1973 Kawasaki s2 350-parted on ebay
1982 kz750(sold)
1978 kz650 hardtail(sold)
1975 honda xl250-sold
1971 yamaha R5-sold
1982 yamaha xs400
1983 gs1100e
1979 KZ 1000 1428 dragbike project
1974 kawasaki H1 500 sold
1972 Kawasaki s2 350-parted on ebay
1973 Kawasaki s2 350-parted on ebay
1982 kz750(sold)
1978 kz650 hardtail(sold)
1975 honda xl250-sold
1971 yamaha R5-sold
1982 yamaha xs400
Please Log in or Create an account to join the conversation.
- keith1
- Offline
- User
- Posts: 1729
- Thanks: 2
Re: OMR's 1978 KZ1000-B2 LTD
15 Nov 2009 15:12
PLUMMEN wrote:
wrong tach too....399.00
wrong speedo there sunshiney one! ill give ya $401.00 as it sits :laugh:
wrong tach too....399.00
Please Log in or Create an account to join the conversation.
- PLUMMEN
- Offline
- User
- Posts: 8139
- Thanks: 104
Re: OMR's 1978 KZ1000-B2 LTD
15 Nov 2009 15:17
im trying not to be too hard on his new find here! :laugh: but now that you mention it those are obviously the wrong valve stem caps also,you got hosed on that one! :laugh:
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.