KZR's Bikes of the Month for 2024

KZombie

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
17 Apr 2016 18:31 #721480 by SWest
Attachments:

Please Log in or Create an account to join the conversation.

  • wrenchmonkey
  • Topic Author
  • Offline
  • User
More
17 Apr 2016 21:29 #721508 by wrenchmonkey
Replied by wrenchmonkey on topic KZombie
Hey there. I don't actually have one. Do they work with 1/2" drive sockets? I thought they were only for 1/4" bits.

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
17 Apr 2016 21:35 #721509 by SWest
Replied by SWest on topic KZombie
They come 1/2" or 3/8". I have both. You can get them at OR or AZ.
Steve

Please Log in or Create an account to join the conversation.

  • wrenchmonkey
  • Topic Author
  • Offline
  • User
More
23 Apr 2016 17:06 #722592 by wrenchmonkey
Replied by wrenchmonkey on topic KZombie
Greetings fellow KZR's.
Time waits for no man, they say but apparently time can wait for the machine shop man. I thought for sure the cylinder head would be done by yesterday but no.
So waiting impatiently all week, I received my new stock sprockets and chain in the mail. I chose to stick with stock 16/42 sprockets and a 530, 102 link chain. I almost clicked on the link to buy a 17/40 sprocket set to try and achieve lower RPM cruising speeds on these 75 MPH highways here in Tejas but it occurred to me that I should probably stick with stock, at least for now, so I can make all comparisons to the manual when the KZombie rises again.
Thus, I had to get that engine sprocket off. Well, I've been spritzin' PB-Blaster on pretty much every nut and bolt on the bike since I first dragged it out of that field years ago and thought for sure I could slap the 32mm socket and a 30" breaker bar on and pop that nut. Mmm? Yeah. Not so much. The manual stated this nut is on with 54 to 62-ish ft/lbs of torque but as you saw in the video above, this one must be more or been glued on. Anyway, cut to the point. I took the advise of the boys here and bought an electric impact and in short order that nut was off!


So, that small mercy granted. It was time to start stripping down the bike further so I could begin the frame rehab. This morning I started early and knew I was going to pull the engine first but then I realized I didn't have any bars installed to steer the hulk around. I decided last week, that I wanted to put KZombie's bars on the 1000 as they swept back further which is more comfortable on that bigger bike than the sport bars it came with. Decision time: First swap the bars on the 1000. That turned out to be a little more work, as I stripped all the LED lighting from the 1000 too and then decided to install the new grips I bought so all the bikes had the same. Here's the result of the bar swapping:


You can see KZombie in the foreground is now sporting the SE sport bars and has one of the new grips that were previously installed on the 1000 sitting to it's left. The 550a is in the far back and has the same sport bars as KZombie now. The 1000 has the chrome bars with a wee bit more rise and sweep.
OK. So that went relatively smooth. Now back to the real task at hand - pulling the engine from KZombie. In the pick above you can see the engine is still in the frame and covered in paper towels as all the case covers had been removed.
Turns out pulling the partially dismantled engine was a real bueno. Like always, all the nuts and bolts loosened easy. Stuffed a couple of jack stands and hydraulic jack with a piece of lumber under it and pulled the puppy myself in like 30 minutes:


So I'm leaving the engine like that until the frame is cleaned-up and repainted and then I'll install it and assembled it in the frame to make man-handling it's weight easier on my girly arms ;)

Then I shuffled all the bikes around again and rolled the KZombie frame outside for a bath:


That vintage gray cast on the frame is pure neglect. Dust and paint booth fall-out from a few years. I was really thinking this frame was going to clean up nice and easy but damn that was not the case. I had to take wire brushes and a hot bucket of soapy water and scrub the thing down. I even had a scrubby pad (like you use for dishwashing - scotchbrite on one side, foam on the other) and it wouldn't or couldn't remove that dust. Thank goodness it was an awesome day outside. I just sat in the driveway all day scrubbing and brushing and scrubbing more until I got to this point:


You can really see how the frame is black again. Gone is that gray over-spray-dust layer. Unfortunately, removing that dust-paint layer revealed the frame is pretty gnarly. I was planning to just lightly sand and then spot prime and paint it but now it seems that would be insufficient. On the plus side, L@@K at those wheels! Dayum! They came out pretty nice and that was just a brushing. I will have to paint them again as the black portions of the rim and spokes is pretty worn-out but the alloy shined up great and for this I am happy.

So as I am still in a holding pattern on the cylinder head. I reckon the thing to do now is drop the front forks and the trailing arm and ??? My gut says to take the frame to be media blasted. I sure don't want to grunt on the garage floor with a wire wheel and hand sanding ad nausea. I can just see the bloody knuckles from wacking my leather-skinned fingers into all those sharp tabs and edges. :pinch:
I figured while the frame is being worked over, I need to rebuild the forks (read: replace at least one) and get the rotors turned. I was also thinking possibly of removing the headlamp bucket arms from the forks because I got the model that didn't come with a headlamp. I was thinking of putting that funky H4/LED headlamp on this one, but I'm not sure yet. More waffling to do - stock? not stock? stock? not stock?

Please Log in or Create an account to join the conversation.

More
23 Apr 2016 18:35 #722608 by Irish-Kawi
Replied by Irish-Kawi on topic KZombie
Hey Wrench,

I gotta say you have an art for telling a story and I always enjoy reading an update here, love the style and journey you take us on every time, please keep it up its a treat!! Great job on all the progress and looks like it's coming together pretty darned quick soon for ya, congrats!

If you have the $$$ for media that is definitely the way to go, but at least in my house cash is king so it's a balancing act between punishing the body for certain tasks or punishing the bank account. Ether way you will get er done and will look killer ;)

Thanks again for sharing and the killer reads,
Brett

All the gear all the time!

1985 Kawasaki GPz 750 (ZX750-A3) 15,000 original miles www.kzrider.com/forum/11-projects/601230...z750-refresh-project

Father - Husband - Bourbonr - Rider
The following user(s) said Thank You: wrenchmonkey

Please Log in or Create an account to join the conversation.

  • wrenchmonkey
  • Topic Author
  • Offline
  • User
More
24 Apr 2016 06:07 #722640 by wrenchmonkey
Replied by wrenchmonkey on topic KZombie
G'day Brett !

Thanks man. I try to relate the story so it's fun. After all, that is why we do it; right?
I think your sentiment - Punish the body or punish the wallet - should be a signature! :laugh: Truer words have never been spoken.

Please Log in or Create an account to join the conversation.

More
24 Apr 2016 09:42 #722667 by Irish-Kawi
Replied by Irish-Kawi on topic KZombie

wrenchmonkey wrote: G'day Brett !

Thanks man. I try to relate the story so it's fun. After all, that is why we do it; right?
I think your sentiment - Punish the body or punish the wallet - should be a signature! :laugh: Truer words have never been spoken.


Hahahaha well I just go based off my limited experience and based on the abuse I've put my body through over time some might say I could be considered a masochist cuz I always keep choosing that punish the body option :P

Brett

All the gear all the time!

1985 Kawasaki GPz 750 (ZX750-A3) 15,000 original miles www.kzrider.com/forum/11-projects/601230...z750-refresh-project

Father - Husband - Bourbonr - Rider

Please Log in or Create an account to join the conversation.

  • wrenchmonkey
  • Topic Author
  • Offline
  • User
More
30 Apr 2016 06:56 #723732 by wrenchmonkey
Replied by wrenchmonkey on topic KZombie
No pictures this time but I do have lots for later.
Quick question:
Can I buy a replacement steering lock key?

I have read in searches here that the lock cylinder cannot be removed without the key and KZombie didn't come with any keys.
I've looked everywhere on it but don't see any numbers to indicate the key's cut.

Please Log in or Create an account to join the conversation.

More
30 Apr 2016 07:01 #723734 by 650ed
Replied by 650ed on topic KZombie
My KZ650 uses the same key for the ignition, steering lock, and seat lock. If your bike has the original seat lock and steering lock you should be able to use the same key for both. My seat lock has a 3 digit code next to the keyhole that can be used to make a key. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
The following user(s) said Thank You: wrenchmonkey

Please Log in or Create an account to join the conversation.

More
30 Apr 2016 07:11 - 30 Apr 2016 07:12 #723737 by rstnick
Replied by rstnick on topic KZombie
I think the '79 650s will have a key code in the Z5001 to Z6000 range.
The key # may be on the side or back of the ignition switch or seat lock.

Nice work on the 650 so far.
B)

Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project
Last edit: 30 Apr 2016 07:12 by rstnick.
The following user(s) said Thank You: wrenchmonkey

Please Log in or Create an account to join the conversation.

More
30 Apr 2016 08:12 #723747 by davido
Replied by davido on topic KZombie
I went through this a couple of weeks ago.Posted here;
www.kzrider.com/forum/4-electrical/602051-csr1000-key-question

Long story short, A good locksmith should be able to sort you out.

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

  • wrenchmonkey
  • Topic Author
  • Offline
  • User
More
30 Apr 2016 08:19 #723749 by wrenchmonkey
Replied by wrenchmonkey on topic KZombie
I bought an ignition and seat lock set with matching keys a while back but i think i probably still have the original seat lock in a box somewhere. I'll hunt it down.
I just looked at that steering lock and thought it was so tiny that it was different from ignition key.

Thanks guys!

Progress on the bike has been slow lately due to us moving & my cylinder heads (2 of them) still in machine shop. On the plus side, my new garage is bigger & i have actual workbenches now; no more grunting on the concrete floor for my old knees! :)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.