Hog vs Kawasaki

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
17 Jun 2015 10:38 - 17 Jun 2015 10:39 #676951 by SWest
Hog vs Kawasaki was created by SWest
Just came across some braggart boasting at Home Depot about how he out ran a Ninja at 136 MPH. They know I ride. I park at the contractor's door. I looked at him and asked what he has. He said it's a S&S 1300 Harley in a chopper frame and the race was on 74 in Anza.
That's at 5000ft. :pinch: He says he will race for $1000 a gear. I asked him if he knew it is a felony to go anything above 80 MPH. "What do you have?' I tell him, he says, "I don't know about Ninjas." "It's not a Ninja!" :angry: At this point I remembered that old saying, Never argue with a crazy person or a fool, if you do, people won't be able to tell the difference. I said "See ya' and walked away. :whistle:
Steve
Last edit: 17 Jun 2015 10:39 by SWest.

Please Log in or Create an account to join the conversation.

More
17 Jun 2015 11:04 #676963 by davido
Replied by davido on topic Hog vs Kawasaki
Be careful steve. You could be opening a can of worms!

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

More
17 Jun 2015 11:27 #676968 by missionkz
Replied by missionkz on topic Hog vs Kawasaki
A good running S&S modded 1300 can make 100hp.

Bruce
1977 KZ1000A1
2016 Triumph T120 Bonneville
Far North East Metro Denver Colorado

Please Log in or Create an account to join the conversation.

More
17 Jun 2015 12:00 #676979 by monkeydoodle
Replied by monkeydoodle on topic Hog vs Kawasaki

Custom Harley Chop
2004 Fazer 1000 with Ivans Full Monty kit
1980 Z750E (half way being re-born into a mix breed something)

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
17 Jun 2015 12:31 #676984 by SWest

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
17 Jun 2015 12:41 #676987 by SWest
Replied by SWest on topic Hog vs Kawasaki

davido wrote: Be careful steve. You could be opening a can of worms!


I'm not saying they can't do it, there have and will always be strokers out there that can. The guy I was talking about seemed to me to be just a jerk trying to impress the people around him. He also was talking about making the home owner pay for left over material. He suggested I charge the client for 5 gallons of roofing cement and use the rest on another job. Ha ha. Jerk. I don't have time for a**holes like that.
Steve

Please Log in or Create an account to join the conversation.

More
17 Jun 2015 15:49 - 17 Jun 2015 15:51 #677014 by kawi810
Replied by kawi810 on topic Hog vs Kawasaki
a friend of mine who owns cycle-rama in pinellas park F L wes brown. he use to build kawi and suzuki drag bikes but got out of it and specialized in HARLEYS now.he still does my machine work for me (heads and cyclinders) but he can make real impressive horsepower with these motors. check him out.

Attachment 11111128_10153355194008890_4703775617370071617_n.jpg not found


original owner of a 1984 gpz 750
1985 turbo 750 stock, being restored.
1984 gpz 750 with 810 cc wiesco's megacycle cams(471-10) 34 mm flatslides v&h pipe ported head dyna ignition. bottom end, crank case from turbo 750 and sprockets.
Attachments:
Last edit: 17 Jun 2015 15:51 by kawi810.

Please Log in or Create an account to join the conversation.

More
17 Jun 2015 15:53 #677016 by kawi810
Replied by kawi810 on topic Hog vs Kawasaki
so think twice about bashing HARLEYS they come a long way since the 70's

original owner of a 1984 gpz 750
1985 turbo 750 stock, being restored.
1984 gpz 750 with 810 cc wiesco's megacycle cams(471-10) 34 mm flatslides v&h pipe ported head dyna ignition. bottom end, crank case from turbo 750 and sprockets.

Please Log in or Create an account to join the conversation.

  • Tyrell Corp
  • Offline
  • User
  • "You were made as well as we could make you"
More
17 Jun 2015 15:54 #677017 by Tyrell Corp
Replied by Tyrell Corp on topic Hog vs Kawasaki
Ha HA great video Monkey, welcome to the clan.

How did I know the guy with the beard owned the Harley? funny guy, I'd have beers and a smoke with him any day.
Even funnier the prissy "180hp yamzuki" owner who though it was a snail and a tortoise race.

in reality give them a full 1/4 mile without courier vans getting in the way, plus a guy that can ride the sportbike properly and the Harley would get smoked imo.

That wasn't really 180 hp...was it a sports 600?

I remember a bike magazine in the 80's explaining the relationship between power and tourque. Two bikes were compared: a 1340 Harley and GPz550. Both making similar max power but in such a different way.

1980 Gpz550 D1, 1981 GPz550 D1. 1982 GPz750R1. 1983 z1000R R2. all four aces

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
17 Jun 2015 16:19 #677020 by SWest
Replied by SWest on topic Hog vs Kawasaki
I asked him what he did in the 1/4 mile. He just talked over me. Kept talking about the guy not giving up. Nothing about what size it was or anything.
Some read from a book and some have practical knowledge. Talk is just that, talk. :whistle:
I have to go back to Depot again in the morning to take back that 5 gal. of cement. I thought it was cheaper but I only need two. It will cost $5 more a gal and I should have listened to myself. I can't expect my client to pay for materials that aren't going to be used. I admit he distracted me a bit. I didn't look to compare the prices. :angry: Oh well, it's a fun ride anyway through 1000 PLMS CYN.
I hope the guy is there. I'd like to see what he is so proud of. B) That is if he'll show it to me.
Steve

Please Log in or Create an account to join the conversation.

More
17 Jun 2015 19:08 #677051 by Nebr_Rex
Replied by Nebr_Rex on topic Hog vs Kawasaki

kawi810 wrote: a friend of mine who owns cycle-rama in pinellas park F L wes brown. he use to build kawi and suzuki drag bikes but got out of it and specialized in HARLEYS now.he still does my machine work for me (heads and cyclinders) but he can make real impressive horsepower with these motors. check him out.

Attachment 11111128_10153355194008890_4703775617370071617_n.jpg not found


H.P. just above a stock 600 cc sport bike.
Still just a direct descendent of a washing machine motor.


.

2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected

www.dotheton.com/forum/index.php?topic=39120.0


.
The following user(s) said Thank You: PLUMMEN

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
17 Jun 2015 19:59 #677055 by SWest

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum