TOPIC:

What's the site in the Netherlands?

i dont know i bought stuff on the auction site onliine and netherlands were the boys i had questions for and it shipped from

Honeybadger-


PS. Can you believe that has 16+ million views?

Honeybadger....

Yes I believe it it's Hilarious!!

Ok I got the cover off, and now see that the countershaft seal needs to be replaced as well.

The shnitzracing site looks promising, I can't "relocate" the nederlands site.. If they are good folks I will not mind buying there.

Looks like this detour will delay the finish another week.

For those of you rwho may have the same problem..

www.schnitzracingstore.com/catalogs/cata...26698&showprevnext=1

All the seals i need for the job, i will order by phone on Wednesday, perhaps it will be here Friday.... I hope.

Thanks for the tip!!

all my dealings with schnitz have always been good.

leon

while your talking to Schlitz, order 1 of these. it has been a blessing for me. i absolutely love it. i am going to order 1 for my cbr too. although, i will order it direct from the supplier for less money.
www.schnitzracingstore.com/catalogs/cata...93451&showprevnext=1


if u have any trouble getting the seal, try your local dealer. i bought 1 a few years ago, so i assume the dealers can still get them.
Good luck.

mark1122 wrote: while your talking to Schlitz,

haha,mark said schlitz !!!!!!!!!!!!!!!


leon

mark1122 wrote: while your talking to Schlitz, order 1 of these. it has been a blessing for me. i absolutely love it. i am going to order 1 for my cbr too. although, i will order it direct from the supplier for less money.
www.schnitzracingstore.com/catalogs/cata...93451&showprevnext=1


if u have any trouble getting the seal, try your local dealer. i bought 1 a few years ago, so i assume the dealers can still get them.
Good luck.

I've been thinking about those quick disconnects myself....did you go with a shut-off type or open type?

531blackbanshee wrote:

mark1122 wrote: while your talking to Schlitz,

haha,mark said schlitz !!!!!!!!!!!!!!!


leon

no wonder i feel thirsty lol

good thing i didnt say clitz. lol

79MKII wrote:

mark1122 wrote: while your talking to Schlitz, order 1 of these. it has been a blessing for me. i absolutely love it. i am going to order 1 for my cbr too. although, i will order it direct from the supplier for less money.
www.schnitzracingstore.com/catalogs/cata...93451&showprevnext=1


if u have any trouble getting the seal, try your local dealer. i bought 1 a few years ago, so i assume the dealers can still get them.
Good luck.

I've been thinking about those quick disconnects myself....did you go with a shut-off type or open type?

i got a shut off on 1 half only. i put that towards the petcock because my petcock drips. if ordered from the supplier u can buy each half with or without the shut off.
this is part of the email i received from the supplier.

"Any Plastic Acetyl Coupler with FKM O-Ring are usually suitable for Fuel so if you look at the PLC Series Coupler (see highlighted Items below) you can find the following pair, we need to replace the standard o-Ring with FKM so we add the letter V at the end of the part number."

PLCD17005V
PLCD22005V

quickcouplings.net/osc/index.php?cPath=2...9fd4371cd9a11c45c3bb

mark1122 wrote: no wonder i feel thirsty lol

good thing i didnt say clitz. lol

Bet you already have a picture for that one.