KZR's Bikes of the Month for 2024

Kz1000B4 Ground Up.

More
06 Aug 2014 09:03 #642879 by DobbinsCMA
Replied by DobbinsCMA on topic Kz1000B4 Ground Up.
About to put in some new front bearings. Seems that the balls were done. I guess I have to pound out the old ones? They seem really stuck in there.

'80 Kz1000B4
MTC 1075 .375 webcams Mikuni RS34
KZ440 Project
81'KZ750E2 Project
Past- '81 Kz750H :(

Please Log in or Create an account to join the conversation.

  • DoctoRot
  • Offline
  • Sustaining Member
  • Oh, the usual... I bowl, I drive around...
More
06 Aug 2014 09:30 #642886 by DoctoRot
Replied by DoctoRot on topic Kz1000B4 Ground Up.

DobbinsCMA wrote: About to put in some new front bearings. Seems that the balls were done. I guess I have to pound out the old ones? They seem really stuck in there.

dont forget to remove the circlip if you haven't already. I have made that mistake before.
The following user(s) said Thank You: PLUMMEN

Please Log in or Create an account to join the conversation.

More
06 Aug 2014 11:30 #642904 by 650ed
Replied by 650ed on topic Kz1000B4 Ground Up.
It might also help to soak the joint between the wheel and outer bearing race with Kroil for a couple days to break any corrosion. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
06 Aug 2014 11:37 #642905 by DobbinsCMA
Replied by DobbinsCMA on topic Kz1000B4 Ground Up.
What does the circlip look like?

'80 Kz1000B4
MTC 1075 .375 webcams Mikuni RS34
KZ440 Project
81'KZ750E2 Project
Past- '81 Kz750H :(

Please Log in or Create an account to join the conversation.

More
06 Aug 2014 12:00 - 06 Aug 2014 12:03 #642909 by Patton
Replied by Patton on topic Kz1000B4 Ground Up.
No eBay APP ID and/or Cert ID defined in Kunena configurationNo eBay APP ID and/or Cert ID defined in Kunena configurationPer kawasaki.com --
Part No. 92033-1040
Kawasaki calls it a Snap Ring, 43.5 mm, used on 150 Kawasaki models.
Supposedly an "active" part that's still available at Kawasaki dealerships

Pics can be seen on ebay listings:






Other aftermarket sources include:
www.partzilla.com/parts/detail/kawasaki/KP-92033-1040.html
www.nwvintagecycleparts.com/search-resul...=92033-1040&st=spart

Watch out for needlessly high shipping charges.
The usually higher dealership price may favorably compare in this instance because of others' shipping charges.

Good Fortune! :)

1973 Z1
KZ900 LTD
Last edit: 06 Aug 2014 12:03 by Patton.
The following user(s) said Thank You: DobbinsCMA

Please Log in or Create an account to join the conversation.

More
06 Aug 2014 12:18 #642913 by DobbinsCMA
Replied by DobbinsCMA on topic Kz1000B4 Ground Up.
funny I didnt see this anywhere when I took it apart. Also dont see it in my diagram in the manual. Where does this clip go and what does it do?

'80 Kz1000B4
MTC 1075 .375 webcams Mikuni RS34
KZ440 Project
81'KZ750E2 Project
Past- '81 Kz750H :(

Please Log in or Create an account to join the conversation.

More
06 Aug 2014 12:26 #642914 by Patton
Replied by Patton on topic Kz1000B4 Ground Up.

DobbinsCMA wrote: funny I didnt see this anywhere when I took it apart. Also dont see it in my diagram in the manual. Where does this clip go and what does it do?


Perhaps not using a genuine Kawasaki Service Manual for the model at hand.

May help to view the diagram at kawaski.com which does include the clip.

Lots of good info on kawasaki.com, including parts diagrams, part names, part numbers, models sharing same part, availability, etc. Here's a link for help with navigating the site and finding information.

www.kzrider.com/forum/13-bike-related/37...imitstart=0&start=20

Good Fortune! :)

1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

More
06 Aug 2014 12:30 #642917 by PLUMMEN
Replied by PLUMMEN on topic Kz1000B4 Ground Up.
Number 16,should be one on each side

Still recovering,some days are better than others.
Attachments:
The following user(s) said Thank You: phawztoar

Please Log in or Create an account to join the conversation.

More
06 Aug 2014 12:40 #642921 by DobbinsCMA
Replied by DobbinsCMA on topic Kz1000B4 Ground Up.
Oh ok ya. I was looking up near the frame for the clip. I havent done anything to the wheel assembly.

'80 Kz1000B4
MTC 1075 .375 webcams Mikuni RS34
KZ440 Project
81'KZ750E2 Project
Past- '81 Kz750H :(

Please Log in or Create an account to join the conversation.

  • DoctoRot
  • Offline
  • Sustaining Member
  • Oh, the usual... I bowl, I drive around...
More
06 Aug 2014 21:24 #642984 by DoctoRot
Replied by DoctoRot on topic Kz1000B4 Ground Up.
are you talking about the steering head bearings? They can be kinda hard to get out but don't be afraid to get tough on them. The race on the stem is the worst one IMO.
The following user(s) said Thank You: PLUMMEN

Please Log in or Create an account to join the conversation.

More
06 Aug 2014 22:31 #642990 by PLUMMEN
Replied by PLUMMEN on topic Kz1000B4 Ground Up.
A long piece of rod and a hammer is the best way I know to do it. :)

Still recovering,some days are better than others.

Please Log in or Create an account to join the conversation.

More
07 Aug 2014 08:36 #643035 by DobbinsCMA
Replied by DobbinsCMA on topic Kz1000B4 Ground Up.
Ya doctoRot. How did you get the race off the stem? The ones in the frame are easy enough. But its really stuck on there...

'80 Kz1000B4
MTC 1075 .375 webcams Mikuni RS34
KZ440 Project
81'KZ750E2 Project
Past- '81 Kz750H :(

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.