KZR's Bikes of the Month for 2024

Kz1000B4 Ground Up.

More
28 Sep 2014 17:44 #649061 by spdygon
Replied by spdygon on topic Kz1000B4 Ground Up.
Did u pay for the service.....what did it cost.
I'm about to start looking for quotes. Will need frame blasted and coated.
Thx

1982 GS1000sz Katana ( #15...17K Miles)
1982 GS1000sz Katana ( # 297....7100k Miles)
1978 Kz1000 Z1R. 10K Miles1
1978 kz1000 z1r 27k miles
1977 KZ 1000 A ( Project ) 54K Miles
1976 Kz900A4 (Red)21K miles
1976 Kz900A4 ( Red)7500 miles
1974 Z1 900 project

Please Log in or Create an account to join the conversation.

More
28 Sep 2014 20:29 #649079 by saxjonz
Replied by saxjonz on topic Kz1000B4 Ground Up.
It's a 5/8s wouldn't it be the same as any other kit? I'm just reading through this now but that question in my mind sticks out. I know that the front MC on z1r is different but other bikes plungers work just the same.

PLUMMEN wrote: Master cylinder looks rough,Ive never seen a rebuild kit for the rear mc off an 80 1000 ltd. :(


79 LTD B3
80 LTD B4 1075 kit JE Pistons .410 cam grind, Bassani, 31 keihin CR Specials...
1980 Z1R, 2002 ZRX1200, 2003 ZRX1200

Please Log in or Create an account to join the conversation.

More
28 Sep 2014 20:31 #649080 by saxjonz
Replied by saxjonz on topic Kz1000B4 Ground Up.
It looks as if you are going for a quality build. I would suggest trying to find an old lockhart cooler. I know they are still out there somewhere.

DobbinsCMA wrote: What brand is this and is it any good for a oil cooler?


79 LTD B3
80 LTD B4 1075 kit JE Pistons .410 cam grind, Bassani, 31 keihin CR Specials...
1980 Z1R, 2002 ZRX1200, 2003 ZRX1200

Please Log in or Create an account to join the conversation.

More
28 Sep 2014 20:56 #649083 by saxjonz
Replied by saxjonz on topic Re:Kz1000B4 Ground Up.
Is that a z1 tail fin I spy?

79 LTD B3
80 LTD B4 1075 kit JE Pistons .410 cam grind, Bassani, 31 keihin CR Specials...
1980 Z1R, 2002 ZRX1200, 2003 ZRX1200

Please Log in or Create an account to join the conversation.

More
29 Sep 2014 12:34 #649120 by DobbinsCMA
Replied by DobbinsCMA on topic Re:Kz1000B4 Ground Up.
I have no idea about the tail. The powder coat for the swing arm, frame, tank is about 600. Little expensive because of other chemicals pre powder.

'80 Kz1000B4
MTC 1075 .375 webcams Mikuni RS34
KZ440 Project
81'KZ750E2 Project
Past- '81 Kz750H :(

Please Log in or Create an account to join the conversation.

More
29 Sep 2014 12:38 #649122 by DobbinsCMA
Replied by DobbinsCMA on topic Kz1000B4 Ground Up.
Seems new cams are in order. Seems the PO didnt like oil. Also going with. 530 chain conversion. New sprockets are in the mail. New cam chain top idler off ebay. New front control ideas would be great. Not looking to break the bank on them.

'80 Kz1000B4
MTC 1075 .375 webcams Mikuni RS34
KZ440 Project
81'KZ750E2 Project
Past- '81 Kz750H :(

Please Log in or Create an account to join the conversation.

More
29 Sep 2014 21:05 #649166 by saxjonz
Replied by saxjonz on topic Kz1000B4 Ground Up.
Dobbins, was the head gasket leaking when you bought it?

79 LTD B3
80 LTD B4 1075 kit JE Pistons .410 cam grind, Bassani, 31 keihin CR Specials...
1980 Z1R, 2002 ZRX1200, 2003 ZRX1200

Please Log in or Create an account to join the conversation.

More
30 Sep 2014 06:50 #649177 by DobbinsCMA
Replied by DobbinsCMA on topic Kz1000B4 Ground Up.
Nope. Had some leaks on the bottom end. Plus used red RTV for the engine case during rebuild so that has to be replaced. Im going with copper head gasket as i am getting head work done next year. Either Larry or pit stop performance (hopefully joe recovers! Nice guy).

'80 Kz1000B4
MTC 1075 .375 webcams Mikuni RS34
KZ440 Project
81'KZ750E2 Project
Past- '81 Kz750H :(

Please Log in or Create an account to join the conversation.

More
30 Sep 2014 14:40 #649236 by DobbinsCMA
Replied by DobbinsCMA on topic Kz1000B4 Ground Up.

Attachment image_2014-09-30.jpg not found




Might have posted that before.

'80 Kz1000B4
MTC 1075 .375 webcams Mikuni RS34
KZ440 Project
81'KZ750E2 Project
Past- '81 Kz750H :(
Attachments:

Please Log in or Create an account to join the conversation.

More
14 Oct 2014 15:04 #650655 by DobbinsCMA
Replied by DobbinsCMA on topic Kz1000B4 Ground Up.
Thinking about getting these cams. .385"@258/0.040 any advice?

'80 Kz1000B4
MTC 1075 .375 webcams Mikuni RS34
KZ440 Project
81'KZ750E2 Project
Past- '81 Kz750H :(

Please Log in or Create an account to join the conversation.

More
25 Oct 2014 14:39 #651695 by DobbinsCMA
Replied by DobbinsCMA on topic Kz1000B4 Ground Up.
Web Cams came in today! I love stickers.

Attachment image_2014-10-25.jpg not found



Attachment image_2014-10-25-2.jpg not found


'80 Kz1000B4
MTC 1075 .375 webcams Mikuni RS34
KZ440 Project
81'KZ750E2 Project
Past- '81 Kz750H :(
Attachments:

Please Log in or Create an account to join the conversation.

More
27 Oct 2014 07:22 #651872 by 531blackbanshee
Replied by 531blackbanshee on topic Kz1000B4 Ground Up.
stickers are always a bonus :woohoo: !

leon

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
The following user(s) said Thank You: DobbinsCMA

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.