Nightrider '84 KZ750 LTD Shafty Cafe

Replied by Surt on topic Nightrider '84 KZ750 LTD Shafty Cafe

inserts all the way

bracing has begun

---

ZN750 Ltd Shaft (non-USA)

Please Log in or Create an account to join the conversation.

Replied by Surt on topic Nightrider '84 KZ750 LTD Shafty Cafe

decided to save a [big] coin and to fab a header myself therefore cut the stock one to see if i could use its runners. nope i couldn't, they r double walled rotten off rattles

but i have this

an od 34mm x 1.5mm stainless seamless tube!

---

ZN750 Ltd Shaft (non-USA)

Please Log in or Create an account to join the conversation.

Replied by Surt on topic Nightrider '84 KZ750 LTD Shafty Cafe

keep bracing the frame and cutting off odd mounts, cut off 6 more - 4 battery box mounts, the ground wire mount and the brake lever half mount hehe

---

ZN750 Ltd Shaft (non-USA)

Please Log in or Create an account to join the conversation.

Replied by Surt on topic Nightrider '84 KZ750 LTD Shafty Cafe

cut off the risers

the frames almost finished

---

ZN750 Ltd Shaft (non-USA)

Please Log in or Create an account to join the conversation.

Replied by Surt on topic Nightrider '84 KZ750 LTD Shafty Cafe

managed to use an oem petcock and fuel sensor, wasn't a piss of coke

everythings just standard lol

---

ZN750 Ltd Shaft (non-USA)

Please Log in or Create an account to join the conversation.

Replied by Surt on topic Nightrider '84 KZ750 LTD Shafty Cafe

---

ZN750 Ltd Shaft (non-USA)

Please Log in or Create an account to join the conversation.

Replied by Surt on topic Nightrider '84 KZ750 LTD Shafty Cafe

rear mounts designed, fabbed and tacked

front mounts r designed, cut out, drilled, shaped and adjusted, will be bored off tomorrow and tack welded
nothing is piss of coke alas

---

ZN750 Ltd Shaft (non-USA)

Please Log in or Create an account to join the conversation.

Replied by Surt on topic Nightrider '84 KZ750 LTD Shafty Cafe

runner bungs r made from stainless

been choosing rear sets, those i like the best, neither too primitive nor too complex, i looked through hundreds on ebay, from cb400's to busa's
quite symbolic that those r from zxr1000 so i bought the rear brake master cylinder from the big ninja as well

the quality is perfect and just $138!
gunna replace adapter plates for mine own though

---

ZN750 Ltd Shaft (non-USA)

Please Log in or Create an account to join the conversation.

Replied by Surt on topic Nightrider '84 KZ750 LTD Shafty Cafe

let's tank!

---

ZN750 Ltd Shaft (non-USA)

Please Log in or Create an account to join the conversation.

Replied by Surt on topic Nightrider '84 KZ750 LTD Shafty Cafe

front mounts r trimmed, bored off and tidied up a bit

and welded... the frames welded around as well, at long last

showing off with a perfect allignment

side panels to be... soon

soon (still 1)

---

ZN750 Ltd Shaft (non-USA)

Please Log in or Create an account to join the conversation.

Replied by Surt on topic Nightrider '84 KZ750 LTD Shafty Cafe

---

ZN750 Ltd Shaft (non-USA)

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.