KZR's Bikes of the Month for 2024

Phoenix Fighter

More
16 Nov 2015 20:18 #699039 by kaw-a-holic
Replied by kaw-a-holic on topic Phoenix Fighter
I think the issue is to big of master. I thought the nice GP set that I bought would work but they don't. My brakes wouldn't work either. I have a stock M.C. that I will try tomorrow night. I didn't rebuild the GSXR front calipers so I may just rebuild them all just to make sure. It's not flex in the line as I have made all brand new stainless steel brake lines.
Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project

Please Log in or Create an account to join the conversation.

More
22 Nov 2015 16:25 #700013 by kaw-a-holic
Replied by kaw-a-holic on topic Phoenix Fighter
Got the front brakes working today. I had to go back to the cable clutch mechanism. I think something is wrong though. I adjusted the clutch per the FSM but when I pull the clutch lever in the rear wheel won't spin free when I have it in gear. I am concerned as I removed the push rod when I was mocking up the hydraulic clutch. Is there anything I could have screwed up there. By the diagram it does not look like it.
Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
22 Nov 2015 16:38 #700017 by SWest
Replied by SWest on topic Phoenix Fighter
Clutch plates are sticking together. They should free up once you ride it.
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
22 Nov 2015 18:30 #700052 by kaw-a-holic
Replied by kaw-a-holic on topic Phoenix Fighter
Thanks Steve that makes sense, I put the new clutch plates in about a year ago. I will do some quick tuning on the carbs and see where it goes from there.
Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
22 Nov 2015 18:49 #700054 by SWest
Replied by SWest on topic Phoenix Fighter
Fire it up. :woohoo:
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
23 Nov 2015 05:08 #700092 by Rockranch
Replied by Rockranch on topic Phoenix Fighter
"Vroom-Vroom!"
(2)-1976 KZ900B-LTD's
1-all stock low mileage...
1 modified
1977 KZ1000 (awaiting resurrection!) :)
...and an old school Honda CB750 Chopper is next on my bucket list!

Oh...and a Pocket Rocket lol!!!

Please Log in or Create an account to join the conversation.

More
25 Nov 2015 17:01 #700550 by kaw-a-holic
Replied by kaw-a-holic on topic Phoenix Fighter
Test run ready. Bench tuned the carbs Monday. They run a bit rich and will have to jet it down a step as the only way I can get them even close to running right according to my color tune. I only have the mixer screw turned out a 1/4 turn. Wish I would have marked down what jets and needles I had in it when I was bench syncing them. :pinch: Fortunately on these carbs the are easy to access. B)


Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project
Attachments:

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
25 Nov 2015 17:09 #700551 by SWest
Replied by SWest on topic Phoenix Fighter
It will lean out as it breaks in. A little rich is better than too lean. I'd put 500 miles on before I started to dial it in. That thing looks like it wants to GO. :woohoo:
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
25 Nov 2015 17:22 #700555 by kaw-a-holic
Replied by kaw-a-holic on topic Phoenix Fighter
That's the plan Steve. I am off work tomorrow so I get to take it for a test ride finally. Should also be able to get a quality video and pictures done tomorrow.
Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
25 Nov 2015 17:28 #700557 by SWest
Replied by SWest on topic Phoenix Fighter
CHOMP, CHOMP, CHOMP. :woohoo:
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
26 Nov 2015 14:19 #700678 by rstnick
Replied by rstnick on topic Phoenix Fighter
Looks great Jon!

B)
Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project

Please Log in or Create an account to join the conversation.

More
26 Nov 2015 15:59 #700694 by kaw-a-holic
Replied by kaw-a-holic on topic Phoenix Fighter

rstnick wrote: Looks great Jon!

B)


Thank you.
Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.