KZR's Bikes of the Month for 2024

my 1980 Z1R and 900 projects

  • 531blackbanshee
  • Topic Author
  • Offline
  • Vendor
More
01 Jul 2008 09:06 #223298 by 531blackbanshee
Replied by 531blackbanshee on topic my 1980 Z1R and 900 projects
got the engine back out and the output shaft bearing changed and replaced the shift mechanism.painted and polished the motor.put it back together,went on a poker run and burnt both coils up at the same time.replaced those with dyna's.pulled and painted the rear wheel and been riding every chance i get :P
here are some pics.
the defective bearing.

here it is with the race busted through the groove,yuk!

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

  • 531blackbanshee
  • Topic Author
  • Offline
  • Vendor
More
01 Jul 2008 09:29 #223300 by 531blackbanshee
Replied by 531blackbanshee on topic my 1980 Z1R and 900 projects
my buddies answered the phone,and got put to work hehe :laugh: .
here my buddy dale is painting my motor.

and here he is polishing my engine covers while i jeweled the slide on his .45.

and here is the work i traded for him to polish my covers.

the covers all polished,and some "motivational" patron!hehe

painted and ready to install.

the "ride of shame"after the coils burnt,and the megaphone bolt fell out.(something about extended
8500 rpm's)didn't lose my megaphone tho.

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

  • 531blackbanshee
  • Topic Author
  • Offline
  • Vendor
More
01 Jul 2008 09:45 #223304 by 531blackbanshee
Replied by 531blackbanshee on topic my 1980 Z1R and 900 projects
the pipe side,muddy.how about that homemade kickstart blockoff?

the freshly painted rear wheel.


another angle.

the finished right side.now to disassemble and repaint those grungy shocks.


thats all for now :silly: .

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

More
01 Jul 2008 11:26 #223311 by RoyNor
Replied by RoyNor on topic my 1980 Z1R and 900 projects
Looks good that wheel now!
It some kind of camouflage better now, since the front wheel also got black color.
I will join the different wheel club for a while...:laugh:

But that liquor bottle worries me! :P :P :woohoo:

Please Log in or Create an account to join the conversation.

  • 531blackbanshee
  • Topic Author
  • Offline
  • Vendor
More
01 Jul 2008 12:07 #223320 by 531blackbanshee
Replied by 531blackbanshee on topic my 1980 Z1R and 900 projects
yes i believe that the black does help camouflage the wheel difference,especially when moving hehe.
also the patron has a dual effect,of motivating and for focus :blink: haha.

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

  • BlackZ1R
  • Offline
  • User
  • Kawasaki in my blood
More
10 Jul 2008 20:01 #225443 by BlackZ1R
Replied by BlackZ1R on topic my 1980 Z1R and 900 projects
Hey Blackbanshee, seems we have a great deal in common . I'm a toolmaker, Banshee owner,Z1-R owner, fabricator
66 Chevelle owner....... heh , great minds think alike . I like the swinger fab up. The extra two inches aught to give it a more stable ride at 120 + ? I can't wait till you put some real shocks on it and test the rigidity of that nice looking swing arm.

Getting back to the +2 in the rear. My Z never really gave me a lot of knee dragging confidence with the stock length swinger and factory shocks . How did that effect the ride and handling in the twisties ? Can you tell if it is more rigid over the factory unit ? I'm looking for answers to get my bike to turn is all, not picking your work apart . Great project. Keep up the good work!!

Kawasaki


Someone once told me to marry that motorcycle I was riding ......there's times I wish I hadda listened .

Please Log in or Create an account to join the conversation.

  • 531blackbanshee
  • Topic Author
  • Offline
  • Vendor
More
11 Jul 2008 07:05 #225523 by 531blackbanshee
Replied by 531blackbanshee on topic my 1980 Z1R and 900 projects
a great deal in common for sure.the extra length i don't think plays as much of a role as the 200mm
rear tire does.the swingarm being much more rigid than stock also adds to the feeling of confidence.
it was a very worthwhile mod and my bike corners night and day better.i can't wait to mod the
frontend to accept a modern wheel,tire and brake.leaned over hitting bumps in high speed corners
used to skip the tire sideways,now it just stays planted.i'm draggin my header on corners that i
never drug at all before.i have ohlins shocks that are to big at the springs to fit next to the
big tire.i had to space the stockers out 3/8's to clear.not sure what i am going to do for shocks
yet.

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

More
11 Jul 2008 13:37 #225595 by BigBlockT
Replied by BigBlockT on topic my 1980 Z1R and 900 projects
Great Job looks alwsome you sure do have the skill was wandering about your 520 sprocket, I read a lot here with some saying 520 are to weak for a kz because I thought about doing that untill guys said that I would either spit the chain out the back or replace every spring, I've got pics of my project here also always looking for tips, hey can you post some pics of that homemade tube bender always wanted to make one, where you located?

Please Log in or Create an account to join the conversation.

  • 531blackbanshee
  • Topic Author
  • Offline
  • Vendor
More
11 Jul 2008 14:14 #225602 by 531blackbanshee
Replied by 531blackbanshee on topic my 1980 Z1R and 900 projects
bigblockt,i love my 520 chain and sprocket's and anyone that says they won't hold up is incorrect.it is a very common coversion on late model sport bikes that make in excess of 150rwhp.i have a non oring chain and was hoping it would stretch some as i cut it so short that at first it was rubbing my swinger a little.i have about 600 miles and just now got it to stop rubbing,although the chain is still a little tighter than i like.i would not hesitate to put a 520 on any street kz.i will never buy another 630 just because i see no reason when busa's come factory with 530.my tubing bender is manual.i will have to get some pictures.there is one i have found that is hydraulic jack powered that i would like to build for bigger tubing.i will find the link and send it to you.
i'm in northeastern oklahoma(skiatook),where are you located?

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

More
11 Jul 2008 15:19 #225606 by BigBlockT
Replied by BigBlockT on topic my 1980 Z1R and 900 projects
I live Indiana(Fort Wayne)I'm running a 190 rear tire in a zx6 swingarm do you think you custom sprocket would work for me? I know that the busa uses a 530 I just was not sure of the 520, how many teeth are you running front,rear and what would you charge for one of those front with 18 teeth?

Please Log in or Create an account to join the conversation.

More
13 Jul 2008 13:15 #225929 by Bad Kaw
Replied by Bad Kaw on topic my 1980 Z1R and 900 projects
Looks so good that I'm on my way with my Z1R on my trailer...be there in the morning...don't know how I'll pay...however, I have spied your 'kryptonite'...your weakness for excellent 'spirits'...hmmmm....bottle of Pinch and a bottle of Crown and I'll have you knocking my new swing-arm out in no time. :)

Just kidding; but it is seriously good looking! Very well done. And I might have to take a trip down to see it in person.

-KR

78 Kawasaki Z1R
81 Kawasaki KZ1000J (mods)
82 Kawasaki ELR Clone (1000 J)
82 Kawasaki KZ750R1/GPz750 ELR-ed
70 Kawasaki KV75
83 Honda CB1100F (few mods)
79 Suzuki GS1000 (rolling frame / project / junk)
84 Suzuki GS1150ES (modified project)
83 Yamaha XJ900R (project / junk)

Please Log in or Create an account to join the conversation.

  • 531blackbanshee
  • Topic Author
  • Offline
  • Vendor
More
14 Jul 2008 12:39 #226118 by 531blackbanshee
Replied by 531blackbanshee on topic my 1980 Z1R and 900 projects
badkaw,thanks for the props.got some more detail work done yesterday/lastnight.built an aluminum undertail,to fill in the gap left by removing my inner fender.polished my cam cover end's,repainted my shocks(much cheaper than new ones)repainted my bar clamps,replaced my rusty steering stem bolt with a not rusty bolt and washer.i have my buddies kz1000 that has a katana frontend,swinger,brakes and wheels in my shop getting some frame rework,i will post some pics when it clears out.schools out,you making any headway on any of that hardware your hoarding :laugh: ?

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.