Piston Hole Kz1000LTD 1982

  • Wookie58
  • Away
  • Moderator
More
03 Nov 2024 06:54 #905730 by Wookie58
Replied by Wookie58 on topic Piston Hole Kz1000LTD 1982
Like it Clay - always more than "one way to skin a cat" :)

Please Log in or Create an account to join the conversation.

More
03 Nov 2024 06:56 #905731 by cartal
Replied by cartal on topic Piston Hole Kz1000LTD 1982
Carbs installed again. All vacuum ports blocked. Started well with just some choke.

Runs ok, and keeps good idle, but:

1.- when you rev it up it stays there for a while, then slowly comes back to idle (always read this is due to an intake leak, but sprayed with carb cleaner and saw no changes

2.- Right hand exhaust smokes quite a bit. Smells rich, not oil related. In the same exhaust there is a distinct misfire around 3-4000 rpm

The rest looks good. All 4 cylinders are firing, there’s no fuel leaks anywhere.

I guess I need to work on my “richness” part. I understand pilot screws are the ones to adjust here. 

Some videos for reference 





    IMG_4456.mov

    IMG_4457.mov

    IMG_4458.mov

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
03 Nov 2024 07:36 #905732 by Wookie58
Replied by Wookie58 on topic Piston Hole Kz1000LTD 1982
You could try disconnecting the throttle cable and rev it manually (this will determine if the "hanging revs are carb or cable related)
Smoke on a fresh built motor is normal (assembly oil needs to burn off which could take 100mls or so) if it's fuel smoke it would normally be black

Please Log in or Create an account to join the conversation.

More
03 Nov 2024 07:37 #905733 by asphalt900
Replied by asphalt900 on topic Piston Hole Kz1000LTD 1982
Just more crap. Yamaha XS1100 also used the 34's. Same as Suzuki 3-bypass holes. But Cartel or anybody else curious, note the initial bench syncing by using the First Intake side bypass hole as a gauge. Set, same #3 initially then follow thru with the remainders. Won't get a screaming high idle and purposeful for drawing in petrol where it's initially needed, enrichment system. Same premise works for any Butterfly carb. Wookie is that like Lynard Skynyrd or just skynarding a Cat, rock and roll cat?      

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
03 Nov 2024 07:42 #905734 by Wookie58
Replied by Wookie58 on topic Piston Hole Kz1000LTD 1982

Just more crap. Yamaha XS1100 also used the 34's. Same as Suzuki 3-bypass holes. But Cartel or anybody else curious, note the initial bench syncing by using the First Intake side bypass hole as a gauge. Set, same #3 initially then follow thru with the remainders. Won't get a screaming high idle and purposeful for drawing in petrol where it's initially needed, enrichment system. Same premise works for any Butterfly carb. Wookie is that like Lynard Skynyrd or just skynarding a Cat, rock and roll cat? 
Clay It's an old English phrase when there is more than one way to achieve the same objective "there is more than one way to skin a cat"

Please Log in or Create an account to join the conversation.

More
03 Nov 2024 07:55 #905735 by daveo
Replied by daveo on topic Piston Hole Kz1000LTD 1982
kzrider.com/forum/attachment/100509

KZ1000K2 LTD 1982 USA CANADA

1982 KZ1100-A2

The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

More
03 Nov 2024 10:11 #905737 by cartal
Replied by cartal on topic Piston Hole Kz1000LTD 1982
Well… as our friend Winston said, “this is not the end, it’s not even the beginning of the end, but it’s the end of the beginning”.

It’s been a long time, and after so much time and effort, I just felt I needed to get all the shiny bits on the bike.

I know carbs are not yet ok, and I know there will still be a lot of fine tuning to be done, but I had to indulge myself.

Gentlemen, please take a look…









Thank you. I would have definitely never arrived here without your help.

Regards,

Carlos
The following user(s) said Thank You: sf4t7

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
03 Nov 2024 10:32 #905738 by Wookie58
Replied by Wookie58 on topic Piston Hole Kz1000LTD 1982
Looks great Carlos, well done to you sir. She has recovered from her abusive previous owner.
Is that a Jaguar XJS in the background (you sir are a glutton for punishment :))
The following user(s) said Thank You: cartal

Please Log in or Create an account to join the conversation.

More
03 Nov 2024 11:04 #905740 by cartal
Replied by cartal on topic Piston Hole Kz1000LTD 1982
That´s a really keen eye, my friend. It is indeed, a V12 XJS. Actually, 2 of them. A UK one I owned back when I lived in London, which is very rusty, and of course RHD, and a Spanish "rolling chassis". Next project will be to change everything from one to the other. That is going to be a really long project!

 
The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
03 Nov 2024 11:38 #905742 by Wookie58
Replied by Wookie58 on topic Piston Hole Kz1000LTD 1982

That´s a really keen eye, my friend. It is indeed, a V12 XJS. Actually, 2 of them. A UK one I owned back when I lived in London, which is very rusty, and of course RHD, and a Spanish "rolling chassis". Next project will be to change everything from one to the other. That is going to be a really long project!


 
Apparently the 5 speed manual from the 3.8 is a relatively easy conversion and makes the V12 a totally different animal :)

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
03 Nov 2024 14:16 - 03 Nov 2024 14:20 #905748 by Scirocco
Replied by Scirocco on topic Piston Hole Kz1000LTD 1982
My methode to sync the carbs :

Sync carbs #4 to #3 = ( master pair #1)
Sync carbs #1 and #2 = ( slave pair #2) independent of cabs #3 and 4 (master pair #1)
Sync pair #1 (carbs #1 and 2) and pair #2 (carbs #3 and 4)

Repeat the procedere if needed for a fine adjustment.
Last edit: 03 Nov 2024 14:20 by Scirocco.

Please Log in or Create an account to join the conversation.

More
03 Nov 2024 20:23 #905754 by sf4t7
Replied by sf4t7 on topic Piston Hole Kz1000LTD 1982
Carlos - bike looks great  


Scotty

1974 Z1A
1015
welded Z1 crank
Andrews 1X Cams
Delkevic 4 into 1
Superbike bars
530 conversion
The following user(s) said Thank You: cartal

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum