- Posts: 4167
- Thank you received: 2386
new to me 1978 KZ 1000
- Wookie58
- Offline
- Moderator
Less
More
11 Nov 2024 12:09 #905976
by Wookie58
Replied by Wookie58 on topic new to me 1978 KZ 1000
You might want to start with a set of "air correctors" from Zed1015 and then go from there, he will best advise on jet sizes
Please Log in or Create an account to join the conversation.
- Treetall
- Topic Author
- Offline
- Sustaining Member
Less
More
- Posts: 65
- Thank you received: 11
12 Nov 2024 10:31 #905993
by Treetall
Replied by Treetall on topic new to me 1978 KZ 1000
Thanks Wookie
I'll give him a shout.
I'll give him a shout.
Please Log in or Create an account to join the conversation.
- Treetall
- Topic Author
- Offline
- Sustaining Member
Less
More
- Posts: 65
- Thank you received: 11
14 Nov 2024 18:45 #906059
by Treetall
Replied by Treetall on topic new to me 1978 KZ 1000
I've decided to go with electronic ignition. I'm having issues with 2,3 cyl coil.
With all the reading I've done on this site. I should go with a DynaTek DS2-1 electronic ignition and a set of DC-1 coils 3 ohm ( the green ones).
Am I correct in all my reading/ studying !?
Never had any luck with knock offs, so we won't go there.
Also, where's a good place to get a Shindengen SH775 R/R. Looked all over the net, can't seem to find an authentic one.
Unless I'm looking with my eyes closed, like my wife likes to say!
Thanks
With all the reading I've done on this site. I should go with a DynaTek DS2-1 electronic ignition and a set of DC-1 coils 3 ohm ( the green ones).
Am I correct in all my reading/ studying !?
Never had any luck with knock offs, so we won't go there.
Also, where's a good place to get a Shindengen SH775 R/R. Looked all over the net, can't seem to find an authentic one.
Unless I'm looking with my eyes closed, like my wife likes to say!
Thanks
Please Log in or Create an account to join the conversation.
- Treetall
- Topic Author
- Offline
- Sustaining Member
Less
More
- Posts: 65
- Thank you received: 11
18 Nov 2024 17:02 #906222
by Treetall
Replied by Treetall on topic new to me 1978 KZ 1000
I've decided to go with electronic ignition. I'm having issues with 2,3 cyl coil.
With all the reading I've done on this site. I should go with a DynaTek DS2-1 electronic ignition and a set of DC-1 coils 3 ohm ( the green ones).
Am I correct in all my reading/ studying !?
Never had any luck with knock offs, so we won't go there.
Also, where's a good place to get a Shindengen SH775 R/R. Looked all over the net, can't seem to find an authentic one.
Unless I'm looking with my eyes closed, like my wife likes to say!
Thanks
Bump
Please Log in or Create an account to join the conversation.
- Buzz Nichols
- Offline
- Sustaining Member
Less
More
- Posts: 215
- Thank you received: 112
18 Nov 2024 21:59 #906229
by Buzz Nichols
Is this thing working? Is this thing on?
1978 KZ1000 LTD
Replied by Buzz Nichols on topic new to me 1978 KZ 1000
Ed (Nessism) seems to be the guy who always knows where to procure the Shindengen SH775 RR's. He's also the guy who can best explain why it's the superior RR.
Is this thing working? Is this thing on?
1978 KZ1000 LTD
Please Log in or Create an account to join the conversation.
- Wookie58
- Offline
- Moderator
Less
More
- Posts: 4167
- Thank you received: 2386
19 Nov 2024 00:38 #906233
by Wookie58
Replied by Wookie58 on topic new to me 1978 KZ 1000
The DS2-1 with 3 ohm coils should get the job done
Please Log in or Create an account to join the conversation.
- Injected
- Offline
- User
Less
More
- Posts: 1069
- Thank you received: 578
19 Nov 2024 08:30 - 19 Nov 2024 08:41 #906237
by Injected
Replied by Injected on topic new to me 1978 KZ 1000
I bought a used genuine SH775 that was on a 2013 Polaris RZR800 ATV off Ebay, it was about $100 Canadian all in. I have been using it on my 750 for 4 seasons with no issues.
I made up my own mini harness with cheap plug ends off of Ebay as well. Search "voltage rectifier connector for 675 1050R T2500676" at the time they were less than $20 for the set.
Search for a wire diagram on here.
If you have a local motorcycle/atv salvage you could check there, would be cheaper but you have to bring a meter to check it on the spot.
I made up my own mini harness with cheap plug ends off of Ebay as well. Search "voltage rectifier connector for 675 1050R T2500676" at the time they were less than $20 for the set.
Search for a wire diagram on here.
If you have a local motorcycle/atv salvage you could check there, would be cheaper but you have to bring a meter to check it on the spot.
Last edit: 19 Nov 2024 08:41 by Injected. Reason: info
Please Log in or Create an account to join the conversation.
- Treetall
- Topic Author
- Offline
- Sustaining Member
Less
More
- Posts: 65
- Thank you received: 11
Yesterday 22:36 #906274
by Treetall
Replied by Treetall on topic new to me 1978 KZ 1000
Thanks guys.
Just wanted to make sure.
Just wanted to make sure.
Please Log in or Create an account to join the conversation.
- Nessism
- Away
- Sustaining Member
Less
More
- Posts: 7456
- Thank you received: 2826
Yesterday 07:59 #906275
by Nessism
Replied by Nessism on topic new to me 1978 KZ 1000
To find a SH775 search eBay for "710001103" or "4012941". Toggle "used" and sort by price. Look for one in decent shape that has "SH775" printed on the top fin. Inspect the photos carefully to make sure the plastic connector isn't damaged. That's the most common problem, other than corrosion, that I've found. I've bought and resold dozens of them. I have a couple right now if you can't find one on ebay. I test them on my 750, and have never found one that didn't work properly. They are very robust.
Please Log in or Create an account to join the conversation.