KZ650 rebuild/custom mod project

More
27 Jun 2015 03:26 #678406 by RickKZ
KZ650 rebuild/custom mod project was created by RickKZ
And here she is. Recently "saved" this KZ650 from a slow death. She was standing outside in a yard gathering sand in the bad Cape Town weather. Some negotiation and $167 later, she was on her way to my house B)

Now for the fun part of getting her fixed up and ready to ride! B)

KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife
Attachments:

Please Log in or Create an account to join the conversation.

More
27 Jun 2015 03:35 #678407 by RickKZ
Replied by RickKZ on topic KZ650 rebuild/custom mod project
Since standing for almost a year, first thing was to get her home.
Next: put some fuel and spark to her to see if she will fire up. Oil level still ok and did not look like any water in the oil.
Needless to say, dead! :sick:

So I decided to start at a point....
  • New set of NGK's - very poor spark on 1,2 and 4
  • Removed and cleaned the carb - seriously dirty!
  • Checked coils - these were all ok
Replaced the fuel tank, connected all and she fired up :)

Now that I know she can run, it is the time needed to get her riding ready.....fun times ahead :)

KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife

Please Log in or Create an account to join the conversation.

  • Tyrell Corp
  • Offline
  • User
  • "You were made as well as we could make you"
More
27 Jun 2015 03:35 #678408 by Tyrell Corp
Replied by Tyrell Corp on topic KZ650 rebuild/custom mod project
looking at the swingarm and more modern front end and rear wheel I guess that someone has
put quite a lot of time in to that before it got neglected. Got to be worth that in parts alone.

1980 Gpz550 D1, 1981 GPz550 D1. 1982 GPz750R1. 1983 z1000R R2. all four aces

Please Log in or Create an account to join the conversation.

More
27 Jun 2015 03:37 #678409 by RickKZ
Replied by RickKZ on topic KZ650 rebuild/custom mod project
Yeah, I also think some bits and pieces were added and removed etc, but one can see close up poor workmanship....Will post more pics!

KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife

Please Log in or Create an account to join the conversation.

More
27 Jun 2015 03:43 #678411 by RickKZ
Replied by RickKZ on topic KZ650 rebuild/custom mod project
Front end
The breaks seem to be locked so will remove all of this, clean up and replace if needed.
Will also need some new front rubber :)

KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife
Attachments:

Please Log in or Create an account to join the conversation.

More
27 Jun 2015 03:48 #678412 by RickKZ
Replied by RickKZ on topic KZ650 rebuild/custom mod project
Rear end
In a reasonable condition but will need a good clean up and inspection. Rubber still good though :silly:

KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife
Attachments:

Please Log in or Create an account to join the conversation.

More
27 Jun 2015 03:52 #678413 by RickKZ
Replied by RickKZ on topic KZ650 rebuild/custom mod project
Motor assembly

Reasonable condition. Will need a good clean up though!

KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife
Attachments:

Please Log in or Create an account to join the conversation.

More
27 Jun 2015 06:00 #678427 by 650ed
Replied by 650ed on topic KZ650 rebuild/custom mod project
Holy cow; it isn't just the swingarm, brakes, etc. that have been changed. The biggest change is the cylinder head! What engine did that cylinder head originally come on? It looks totally different than any KZ650 head. The first picture below shows yours. The 2nd and 3rd pictures show the KZ650 cylinder head. Notice that not only is the top where the cover attaches different, but the fins near the top are also different. Any ideas what it is? Ed

Attachment 00003-3.jpg not found



Attachment 00003a-47.jpg not found



Attachment 00003b-12.jpg not found


1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Attachments:

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
27 Jun 2015 06:22 #678428 by SWest
The following user(s) said Thank You: 650ed

Please Log in or Create an account to join the conversation.

More
27 Jun 2015 08:00 - 27 Jun 2015 08:01 #678443 by 650ed
Replied by 650ed on topic KZ650 rebuild/custom mod project

swest wrote: Zephyr head?
Steve


That might be it! Here's a pic of a 750 Zephyr, and the head looks like a match. Ed

Attachment 00003a-48.jpg not found


1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Attachments:
Last edit: 27 Jun 2015 08:01 by 650ed.

Please Log in or Create an account to join the conversation.

More
27 Jun 2015 13:53 #678503 by RickKZ
Replied by RickKZ on topic KZ650 rebuild/custom mod project
That could be the case....The guy I bought this from did mention that he replaced the head with a reconditioned one.
This is a cyborg bike lol

KZ 650 mono shock rebuild project.
KZ 440 Ltd bobber build for my wife

Please Log in or Create an account to join the conversation.

More
27 Jun 2015 14:42 #678514 by rstnick
Replied by rstnick on topic KZ650 rebuild/custom mod project
Welcome.
Nice project bike.
B)

Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, Progressive Suspension, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
1978 KZ1000 project

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum