- Posts: 2933
- Thank you received: 446
Better Than Nothing---The rebirth of a Superbike.
- JR
- Offline
- Sustaining Member
Stunning!
I'm sure you are going to get lots of additional praise on the 27th.
1980 kz750E1, Delkevic exhaust
Please Log in or Create an account to join the conversation.
- bluej58
- Offline
- Sustaining Member
- The chrome don't get you home
- Posts: 2481
- Thank you received: 511
I see a trophy in the in the near future for you, wish I could be there.
Get healthy
JD
78 KZ1000 A2A
Please Log in or Create an account to join the conversation.
- farmer1
- Offline
- User
- Posts: 32
- Thank you received: 2
Please Log in or Create an account to join the conversation.
- 650ed
- Offline
- User
- Posts: 15343
- Thank you received: 2829
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Please Log in or Create an account to join the conversation.
- turboguzzi
- Offline
- User
- Posts: 837
- Thank you received: 72
first, get well, we need you riding your baby!
i join the chorus.... could be super cool to get some detail shots of the ports if you get around to it
any idea how much hp yours was pumping out? i recall cycle worlds analysis of wes cooley's yosh GS1000 claiming 133...
Please Log in or Create an account to join the conversation.
- Dr. Gamma
- Topic Author
- Offline
- Sustaining Member
- Posts: 1228
- Thank you received: 681
farmer1 wrote: What holds the side number plates on? are they just bolted to the seat?
Yes they are. The same way DesRoche did on their MK II's. Cheap, and it works. Plus when I rode the bike on the street, Remove four 6mm bolts, and they are gone!!!
1972 H2 750 Cafe Racer built in 1974.
1976 KH400 Production Road Racer.
1979 Kz1000 MK. II Old AMA/WERA Superbike.
1986 RG500G 2 stroke terror.
1986 GSXR750RG The one with the clutch that rattles!
Up in the hills near Prescott, Az.
Please Log in or Create an account to join the conversation.
- Dr. Gamma
- Topic Author
- Offline
- Sustaining Member
- Posts: 1228
- Thank you received: 681
I failed the treadmill tests. I might be looking at open heart surgery in the near future. Will know more when I see my doctor next week!!! What else can happen to me!!!
1972 H2 750 Cafe Racer built in 1974.
1976 KH400 Production Road Racer.
1979 Kz1000 MK. II Old AMA/WERA Superbike.
1986 RG500G 2 stroke terror.
1986 GSXR750RG The one with the clutch that rattles!
Up in the hills near Prescott, Az.
Please Log in or Create an account to join the conversation.
- KZB2 650
- Offline
- User
- Posts: 1475
- Thank you received: 265
1978 KZ650 b-2
700cc Wiseco kit 10 to 1.
1980 KZ750 cam, ape springs, stock clutch/ Barnett springs.
Vance and Hines Header w/ comp baffle and Ape pods, Dyna S and green coils, copper wires.
29MM smooth bores W/ 17.5 pilots, 0-6s and 117.5 main
16/42 gearing X ring chain and alum rear JT sprocket.
Please Log in or Create an account to join the conversation.
- Dr. Gamma
- Topic Author
- Offline
- Sustaining Member
- Posts: 1228
- Thank you received: 681
650ed wrote: That bike is cleeeeeeeeeeeeeeeeeeeeen! Ed
I always liked the way Roger Penske's cars looked, meticulously prepared, and not a spot of dirt anywhere!!!!
I may have not been the fastest rider at the track, but I always had some of the cleanest looking bikes. The tech people always told me how they enjoyed teching my bikes, and not having to worry about getting a tetanus shot after touching my bike. You would not believe how filthy some people's race bikes were. I would be ashamed to ride some of those bikes on the street let alone bring them to the track.
1972 H2 750 Cafe Racer built in 1974.
1976 KH400 Production Road Racer.
1979 Kz1000 MK. II Old AMA/WERA Superbike.
1986 RG500G 2 stroke terror.
1986 GSXR750RG The one with the clutch that rattles!
Up in the hills near Prescott, Az.
Please Log in or Create an account to join the conversation.
- farmer1
- Offline
- User
- Posts: 32
- Thank you received: 2
Do you have anything around the holes to stop the seat tearing?Dr. Gamma wrote:
farmer1 wrote: What holds the side number plates on? are they just bolted to the seat?
Yes they are. The same way DesRoche did on their MK II's. Cheap, and it works. Plus when I rode the bike on the street, Remove four 6mm bolts, and they are gone!!!
Please Log in or Create an account to join the conversation.
- Dr. Gamma
- Topic Author
- Offline
- Sustaining Member
- Posts: 1228
- Thank you received: 681
farmer1 wrote:
Do you have anything around the holes to stop the seat tearing?Dr. Gamma wrote:
farmer1 wrote: What holds the side number plates on? are they just bolted to the seat?
Yes they are. The same way DesRoche did on their MK II's. Cheap, and it works. Plus when I rode the bike on the street, Remove four 6mm bolts, and they are gone!!!
Even after drilling the holes through the seat pan, and seat cover back in 1979, the seat cover holes have not torn or gotten any bigger. I do put the 6mm bolts and 1 inch washers back in place when I make the bike "street legal"
1972 H2 750 Cafe Racer built in 1974.
1976 KH400 Production Road Racer.
1979 Kz1000 MK. II Old AMA/WERA Superbike.
1986 RG500G 2 stroke terror.
1986 GSXR750RG The one with the clutch that rattles!
Up in the hills near Prescott, Az.
Please Log in or Create an account to join the conversation.
- Dr. Gamma
- Topic Author
- Offline
- Sustaining Member
- Posts: 1228
- Thank you received: 681
Unfortunately the voting did not turn out so good for my Superbike as it did for my RG500. The RG500 swept the Best Suzuki built after 1975 class. The Superbike got beat by a Kawasaki F21M motocross bike. That really sucks in my book. Well 1 out of 2 ain't really that bad I guess.
I told the people from VJMC that I hope they don't get any nasty emails from any KZR members about me not winning anything with my KZ1000!!!
I think this is the sucker that beat me!!!
1972 H2 750 Cafe Racer built in 1974.
1976 KH400 Production Road Racer.
1979 Kz1000 MK. II Old AMA/WERA Superbike.
1986 RG500G 2 stroke terror.
1986 GSXR750RG The one with the clutch that rattles!
Up in the hills near Prescott, Az.
Please Log in or Create an account to join the conversation.