My Kz550 carbs aren't sucking enough gas
- PABCASSOINK 32
- Topic Author
- Offline
- User
- Posts: 14
- Thanks: 0
My Kz550 carbs aren't sucking enough gas
27 Mar 2016 18:27
Ok so I turned my 1982 Kawasaki KZ 550 LTD into a bobber , chopped the rear frame, lowered it, all of that good stuff. But now I see that my fuel filter isn't filling up with gas which causes it not to start since the lack of gas flowing through. I tried messing with the petcock valve and choking it and still nothing. I recently rebuild my carbs so I'm not sure if that might be the problem but I need help !
Please Log in or Create an account to join the conversation.
- punisher11b
- Offline
- User
- Posts: 225
- Thanks: 22
Re: My Kz550 carbs aren't sucking enough gas
27 Mar 2016 19:53
Have you checked the filters on the petcock inside the tank? Sounds like it's a petcock issue.
- good luck
Please Log in or Create an account to join the conversation.
- SWest
- Offline
- Sustaining Member
- 10 22 2014
- Posts: 23177
- Thanks: 2807
Re: My Kz550 carbs aren't sucking enough gas
27 Mar 2016 20:06
A vent on the tank or the carbs.
Steve
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229
Please Log in or Create an account to join the conversation.
- TexasKZ
- Offline
- Platinum Member
- Posts: 7665
- Thanks: 2306
Re: My Kz550 carbs aren't sucking enough gas
27 Mar 2016 20:45 - 27 Mar 2016 20:46
Did you reconnect the vacuum line to the petcock and to the proper vacuum port on one of the carbs?
Are you sure that the filter is for a gravity feed system and not for one with a pump?
Are you sure that the filter is for a gravity feed system and not for one with a pump?
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
Last edit: 27 Mar 2016 20:46 by TexasKZ.
Please Log in or Create an account to join the conversation.
- PABCASSOINK 32
- Topic Author
- Offline
- User
- Posts: 14
- Thanks: 0
Please Log in or Create an account to join the conversation.
- TexasKZ
- Offline
- Platinum Member
- Posts: 7665
- Thanks: 2306
Re: My Kz550 carbs aren't sucking enough gas
27 Mar 2016 20:53
Fuel tank must vent, usually through a passageway in the cap.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
Please Log in or Create an account to join the conversation.
- PABCASSOINK 32
- Topic Author
- Offline
- User
- Posts: 14
- Thanks: 0
Re: My Kz550 carbs aren't sucking enough gas
27 Mar 2016 21:00
The fillter to the petcock valve seems to be clear and it's the original valve. It have the vacuum line that come out the back of the petcock to the carbs. I'm not use if my tank has a vent by the cap tho, gas is able to leak out of it if I flip it over so there most be some type of air flow. All it does is drip in the filter when it use to be completely filled.
Please Log in or Create an account to join the conversation.
- TexasKZ
- Offline
- Platinum Member
- Posts: 7665
- Thanks: 2306
Re: My Kz550 carbs aren't sucking enough gas
27 Mar 2016 21:03
Petcock may be stuck. May need to clean it and replace the o rings.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
Please Log in or Create an account to join the conversation.
- PABCASSOINK 32
- Topic Author
- Offline
- User
- Posts: 14
- Thanks: 0
Please Log in or Create an account to join the conversation.
- SWest
- Offline
- Sustaining Member
- 10 22 2014
- Posts: 23177
- Thanks: 2807
Re: My Kz550 carbs aren't sucking enough gas
27 Mar 2016 21:06
Old, rubber hard, gummed up.
Steve
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229
Please Log in or Create an account to join the conversation.
- PABCASSOINK 32
- Topic Author
- Offline
- User
- Posts: 14
- Thanks: 0
Re: My Kz550 carbs aren't sucking enough gas
27 Mar 2016 21:09
But it's pretty new ? It's all cleaned out as well .
Please Log in or Create an account to join the conversation.
- SWest
- Offline
- Sustaining Member
- 10 22 2014
- Posts: 23177
- Thanks: 2807
Re: My Kz550 carbs aren't sucking enough gas
27 Mar 2016 21:13
Disconnect the fuel lines and see how they flow. Do the same with the float bowls.
Steve
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229
Please Log in or Create an account to join the conversation.