parts guys cant ID this carb

jagrider
Offline
User
Registered
Posts: 49
Thanks: 1

Re: parts guys cant ID this carb

23 May 2008 01:07

Here is some info on tuning CV type cards...

www.factorypro.com/tech_tuning_procedure...igh_rpm_engines.html

here is some info on mikuni carbs tuning

www.iwt.com.au/mikunicarb.htm

Sudco 1-323-728-5407 is a very good place for carb parts and more.

another place for jets
www.motorcyclecarbs.com/Keihin_Main_Jets...02598761206120423535

more jets
www.mfgsupply.com/SnowCarbMainJets.html

more jets
www.carbparts.com/mikuni/mikuni_tuning.htm

These are a few places I bought from.

Loud pipes save lives.

Please Log in or Create an account to join the conversation.

jim_palmore
Topic Author
Offline
User
Registered
Posts: 127
Thanks: 0

Re: parts guys cant ID this carb

24 May 2008 00:37 - 25 May 2008 13:05

#215483

yeah those links are very useful... thanks..
I had some leftover black hi temp silicon so I applied a thin coat on the carb holders. gonna put my carbs back together this weekend and check for air leaks..

ENJOY LIFE,, THIS IS NOT A DRESS REHEARSAL.
1991 KZ1000P FROM COPPER TO CHOPPER. MY BADASS BOBBER

Last edit: 25 May 2008 13:05 by jim_palmore. Reason: spelling

Please Log in or Create an account to join the conversation.

jmargrav
Offline
User
Registered
Posts: 45
Thanks: 0

Re: parts guys cant ID this carb

24 May 2008 23:14

#215648

Thatâ€™s interesting I always thought that all keihin CV 34 carbs were the same, hope you get your bike up and running now is prime riding time.

1982 KZ750-E3
Lariamie Wyoming GO WYO!

Please Log in or Create an account to join the conversation.

jim_palmore
Topic Author
Offline
User
Registered
Posts: 127
Thanks: 0

Re: parts guys cant ID this carb

25 May 2008 13:13

#215717

I actually thought there were different models for different bikes and sizes.. but I guess its all about the jetting:ohmy:

ENJOY LIFE,, THIS IS NOT A DRESS REHEARSAL.
1991 KZ1000P FROM COPPER TO CHOPPER. MY BADASS BOBBER

Please Log in or Create an account to join the conversation.

jim_palmore
Topic Author
Offline
User
Registered
Posts: 127
Thanks: 0

Re: parts guys cant ID this carb

31 May 2008 14:15

#216981

well Z1 saved the day. they ID'd my carbs and rob is ordering my stuff..installed my saddle bags last weekend and looking good.. now I just gatta wait on the carb parts

ENJOY LIFE,, THIS IS NOT A DRESS REHEARSAL.
1991 KZ1000P FROM COPPER TO CHOPPER. MY BADASS BOBBER

Please Log in or Create an account to join the conversation.

zebsmith289
Offline
User
Registered
Posts: 2
Thanks: 0

Re: parts guys cant ID this carb

21 Jun 2014 20:01

#637465

Hello everyone, I know this is a common topic, but I can't find those 70s, I think you said they are the mains. Anyone have any leads on that? Thanks!

Please Log in or Create an account to join the conversation.

JR
Offline
Sustaining Member
Registered
Posts: 2961
Thanks: 477

Re: parts guys cant ID this carb

22 Jun 2014 04:21

#637484

Go to Z1enterprises.com and type keihin in the search box
See towards bottom of page 2
Or click on the link below
www.z1enterprises.com/ListItems.aspx?pag...e=20&keywords=keihin

1980 kz750E1, Delkevic exhaust

Please Log in or Create an account to join the conversation.

zebsmith289
Offline
User
Registered
Posts: 2
Thanks: 0

Re: parts guys cant ID this carb

27 Jun 2014 22:15

#638233

Thanks JR! Do you guys shim he needle at all? I shimmed it 2 washers but think I need to go to 3 or do I need to just buy a different needle?, It will barely run above about 5K RPM. Thanks again!

Please Log in or Create an account to join the conversation.