76 KZ900 upgrade
- mark1122
-
Topic Author
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thanks: 109
Re: 76 KZ900 upgrade
23 Jun 2010 19:24
That sure was a blast, Rob.I'll let u know when i can get to Haugens.
i will try to get a knee down next time for sure.That was crash #2 for the cbr. i think i have the fairing glassed up enough for another go. I hope i dont drop it next. lol
I would rather drop the cbr than my beloved KZ though.:laugh:
It's amazing how much more clearance the new bikes have, this is a good reason to use the longest forks u can, in a conversion project. the gullwing trees are a great idea for these old girls.
i will try to get a knee down next time for sure.That was crash #2 for the cbr. i think i have the fairing glassed up enough for another go. I hope i dont drop it next. lol
I would rather drop the cbr than my beloved KZ though.:laugh:
It's amazing how much more clearance the new bikes have, this is a good reason to use the longest forks u can, in a conversion project. the gullwing trees are a great idea for these old girls.

76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- testarossa
-
- Offline
- User
- Attack life, it's only trying to kill you.
- Posts: 3678
- Thanks: 82
Re: 76 KZ900 upgrade
23 Jun 2010 19:34
It's funny how long it can take to gaing the trust in your bike to get a knee down, and then how fast you lose the trust when you manage to get your elbow down. And your shoulder, and your head....
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
Please Log in or Create an account to join the conversation.
- mark1122
-
Topic Author
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thanks: 109
Re: 76 KZ900 upgrade
23 Jun 2010 19:43
testarossa wrote:
LOL:laugh: that is so true. i would go faster each lap, until the crash bars would hit. then i'd back off, then i would go faster till they hit again. then i almost lost it.i just cant be satisfied going around and around.:lol:
i just ordered higher pegs for the cbr. maybe i should just keep the lower 1's on so i dont get too stupid.:laugh:
NOT.:woohoo:
It's funny how long it can take to gaing the trust in your bike to get a knee down, and then how fast you lose the trust when you manage to get your elbow down. And your shoulder, and your head....
LOL:laugh: that is so true. i would go faster each lap, until the crash bars would hit. then i'd back off, then i would go faster till they hit again. then i almost lost it.i just cant be satisfied going around and around.:lol:
i just ordered higher pegs for the cbr. maybe i should just keep the lower 1's on so i dont get too stupid.:laugh:
NOT.:woohoo:
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- PLUMMEN
-
- Offline
- User
- Posts: 8139
- Thanks: 104
Attachments:
Please Log in or Create an account to join the conversation.
- testarossa
-
- Offline
- User
- Attack life, it's only trying to kill you.
- Posts: 3678
- Thanks: 82
Re: 76 KZ900 upgrade
23 Jun 2010 20:01
mark1122 wrote:
i just ordered higher pegs for the cbr. maybe i should just keep the lower 1's on so i dont get too stupid.:laugh:
NOT.:woohoo:[/quote]
Naw, that's the whole point of having a track bike. Do all of the stupid stuff on the little Honda. Zip ties can hold broken fairings together quite well. One zx-10r.net member dumped his orange bike, and used those green zip ties through evenly spaced holes on either side of the cracks. It actually looked kind of sinister and cool. Sort of a moto-frankenstien.
i just ordered higher pegs for the cbr. maybe i should just keep the lower 1's on so i dont get too stupid.:laugh:
NOT.:woohoo:[/quote]
Naw, that's the whole point of having a track bike. Do all of the stupid stuff on the little Honda. Zip ties can hold broken fairings together quite well. One zx-10r.net member dumped his orange bike, and used those green zip ties through evenly spaced holes on either side of the cracks. It actually looked kind of sinister and cool. Sort of a moto-frankenstien.
1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN
Please Log in or Create an account to join the conversation.
- trianglelaguna
-
- Offline
- User
- New and improved - extra strength
- Posts: 8724
- Thanks: 236
Re: 76 KZ900 upgrade
23 Jun 2010 20:04
awesome.....witht the guards and modern bits / lines it looks almost like an eliminator...cool pics
mark1122 wrote:
mark1122 wrote:
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- tk11b40
-
- Offline
- User
- Posts: 622
- Thanks: 19
Re: 76 KZ900 upgrade
25 Jun 2010 12:15
I am so jealous Mark....
I wanna get on the track!!:woohoo:
I wanna get on the track!!:woohoo:
Suzuki GSXR 750 slabside
Ducati S4R
Husqvarna FE 350s
Ducati S4R
Husqvarna FE 350s
Please Log in or Create an account to join the conversation.
- Bad Kaw
-
- Offline
- User
- Flying Squirell
- Posts: 1750
- Thanks: 13
Re: 76 KZ900 upgrade
29 Jun 2010 17:52
Mark,
You da man!
-KR
You da man!
-KR
78 Kawasaki Z1R
81 Kawasaki KZ1000J (mods)
82 Kawasaki ELR Clone (1000 J)
82 Kawasaki KZ750R1/GPz750 ELR-ed
70 Kawasaki KV75
83 Honda CB1100F (few mods)
79 Suzuki GS1000 (rolling frame / project / junk)
84 Suzuki GS1150ES (modified project)
83 Yamaha XJ900R (project / junk)
81 Kawasaki KZ1000J (mods)
82 Kawasaki ELR Clone (1000 J)
82 Kawasaki KZ750R1/GPz750 ELR-ed
70 Kawasaki KV75
83 Honda CB1100F (few mods)
79 Suzuki GS1000 (rolling frame / project / junk)
84 Suzuki GS1150ES (modified project)
83 Yamaha XJ900R (project / junk)
Please Log in or Create an account to join the conversation.
- larrycavan
-
- User
- Thanks: 0
Re: 76 KZ900 upgrade
29 Jun 2010 18:52 - 29 Jun 2010 18:53
testarossa wrote:
:woohoo: Oh yea...ouch..ooooo....ahhh..
Mark you've got some stones buddy! Keep it upright brother!
It's funny how long it can take to gaing the trust in your bike to get a knee down, and then how fast you lose the trust when you manage to get your elbow down. And your shoulder, and your head....
:woohoo: Oh yea...ouch..ooooo....ahhh..
Mark you've got some stones buddy! Keep it upright brother!
Last edit: 29 Jun 2010 18:53 by larrycavan.
Please Log in or Create an account to join the conversation.
- mark1122
-
Topic Author
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thanks: 109
Re: 76 KZ900 upgrade
04 Jul 2010 13:58
I just got back from a week at a friends cottage. we found some sweet twisty roads. what a great ride.
Cant wait to get back to the track this week.
YE Ha!:woohoo:
Cant wait to get back to the track this week.
YE Ha!:woohoo:
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- mark1122
-
Topic Author
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thanks: 109
Re: 76 KZ900 upgrade
17 Aug 2010 18:28 - 17 Aug 2010 18:54
I was tired of getting a soar ass from my hard seat.
Soooo, i took matters into my own hands.
i bought 2 gel pads and routed a hole into the seat foam. then i just cut the gel to fit and presto. Simple really.
:laugh:
Soooo, i took matters into my own hands.
i bought 2 gel pads and routed a hole into the seat foam. then i just cut the gel to fit and presto. Simple really.
:laugh:
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 17 Aug 2010 18:54 by mark1122.
Please Log in or Create an account to join the conversation.
- porchev914
-
- Offline
- User
- Whats that? Half of my swingarm is missing?!?!?
- Posts: 2716
- Thanks: 19
Re: 76 KZ900 upgrade
17 Aug 2010 18:32
you did that, and you didn't post any pics??? Bad Mark! Bad!
FRANKEN Z!
1978 KZ1000 A2A with 08'Speed Triple SSSA and '06 GSXR1000 front end
1978 KZ1000 A2A with 08'Speed Triple SSSA and '06 GSXR1000 front end
Please Log in or Create an account to join the conversation.