KZR750R1

Replied by kzr750r1 on topic The KZR750R1 Return to life 08

Front turn signal mod. Fit's perfectly in the faring notch.

---

KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST

Please Log in or Create an account to join the conversation.

Replied by kzr750r1 on topic The KZR750R1 Return to life 08

Motor repair painted.

---

KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST

Please Log in or Create an account to join the conversation.

Replied by kzr750r1 on topic The KZR750R1 Return to life 08

Reg./Rectifier perch.

---

KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST

Please Log in or Create an account to join the conversation.

Replied by kzr750r1 on topic The KZR750R1 Return to life 08

Leading to the case vent filter mount attached to the bottom of the rectifier bolts.

---

KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST

Please Log in or Create an account to join the conversation.

Replied by kzr750r1 on topic The KZR750R1 Return to life 08

Da Filter in location.

---

KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST

Please Log in or Create an account to join the conversation.

Replied by kzr750r1 on topic The KZR750R1 Return to life 08

Side cover mod. Note the half round ABS is welded in place to keep the tabs from flexing.

---

KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST

Please Log in or Create an account to join the conversation.

Replied by kzr750r1 on topic The KZR750R1 Return to life 08

Exposed left side. Note the Zeypher faring grafted into the unit. Since I used the Zeypher wiring harness it made placement of the fuse box clean. Dyana 2000 barley fits in the old igniter slot.

---

KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST

Please Log in or Create an account to join the conversation.

Replied by kzr750r1 on topic The KZR750R1 Return to life 08

Battery box perch.

---

KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST

Please Log in or Create an account to join the conversation.

Replied by kzr750r1 on topic The KZR750R1 Return to life 08

Break accessories like Rear switch and Master cylinder oil reservoir.

---

KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST

Please Log in or Create an account to join the conversation.

Replied by kzr750r1 on topic The KZR750R1 Return to life 08

Rear m/c and Pipe hanger. Right rear set.

---

KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST

Please Log in or Create an account to join the conversation.

Replied by kzr750r1 on topic The KZR750R1 Return to life 08

Pipe and motor detail left side. Ceramic coated black three peice Kerker 4 to 1 pipe. Nice stainless bung in place of an o2 pickup. Probably never use it but at least it's there.

---

KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST

Please Log in or Create an account to join the conversation.

Replied by kzr750r1 on topic The KZR750R1 Return to life 08

And the item that was the butt of jokes for using duct tape to repair on the old forum. The new custom Corbin seat.

---

KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST

Please Log in or Create an account to join the conversation.