Drag strip trip.
- zukdave
-
Topic Author
- Offline
- User
- Posts: 1685
- Thanks: 229
Re: Drag strip trip.
23 May 2013 22:51
Tire up date!!
After a little round town riding and a 300 mile
ride this tire rock's.
Stickiest street tire I've had yet.
My bike has never been wheelie prone on the street and
now it'll carry front on roads it would blow the tire off before.
Good thing the new bars done cause I'll damn sure need it
After a little round town riding and a 300 mile
ride this tire rock's.
Stickiest street tire I've had yet.
My bike has never been wheelie prone on the street and
now it'll carry front on roads it would blow the tire off before.
Good thing the new bars done cause I'll damn sure need it
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Please Log in or Create an account to join the conversation.
- zukdave
-
Topic Author
- Offline
- User
- Posts: 1685
- Thanks: 229
Re: Drag strip trip.
26 May 2013 17:11
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Please Log in or Create an account to join the conversation.
- zukdave
-
Topic Author
- Offline
- User
- Posts: 1685
- Thanks: 229
Re: Drag strip trip.
01 Jun 2013 09:53
Game on.
I'll post update's later today if I have service at the track.
I'll post update's later today if I have service at the track.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Please Log in or Create an account to join the conversation.
- zukdave
-
Topic Author
- Offline
- User
- Posts: 1685
- Thanks: 229
Re: Drag strip trip.
07 Jun 2013 20:14 - 26 Jun 2013 22:32
How to kick a ZRX's a$$
Left lane 7.65 to a losing 7.76.
The new tire is supper sticky it was all I could do to hold it in the water.
Low 1.80's sixty ft. tripping the light with the back tire.
Only made two pass with the bar Sat. night.
One time trial run went 7.78 so first round I dialed a 7.70
and went a 7.63 and put myself out.
Sunday ran no bar got in about six time runs and beat Eric's ZRX five in a row.
Won my first round pass then a Busa put me out second round.





Left lane 7.65 to a losing 7.76.
The new tire is supper sticky it was all I could do to hold it in the water.
Low 1.80's sixty ft. tripping the light with the back tire.
Only made two pass with the bar Sat. night.
One time trial run went 7.78 so first round I dialed a 7.70
and went a 7.63 and put myself out.
Sunday ran no bar got in about six time runs and beat Eric's ZRX five in a row.
Won my first round pass then a Busa put me out second round.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Last edit: 26 Jun 2013 22:32 by zukdave.
Please Log in or Create an account to join the conversation.
- peter1958
-
- Offline
- Banned
- Posts: 1555
- Thanks: 198
Re: Drag strip trip.
07 Jun 2013 21:08
WTG! But I feel bad you beating up on a green bike ya know.
www.kzzone.com/
cavanaughracing.com/kzdata.html
www.mtceng.com/index.php/us-dealers/44-f...-performance-orlando
Please Log in or Create an account to join the conversation.
- zukdave
-
Topic Author
- Offline
- User
- Posts: 1685
- Thanks: 229
Re: Drag strip trip.
07 Jun 2013 22:53
From the first time we went to the track
Eric's said my bike would NEVER beat his ZRX.
This was 1/8 mile still have to beat him 1/4 mile.
Last time out Eric didn't bring his bike but
a buddy Will was there with his '99 ZRX 1100
with cams, carb's, and a pipe I beat him four in a row 1/4 mile.
Eric's said my bike would NEVER beat his ZRX.
This was 1/8 mile still have to beat him 1/4 mile.
Last time out Eric didn't bring his bike but
a buddy Will was there with his '99 ZRX 1100
with cams, carb's, and a pipe I beat him four in a row 1/4 mile.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Please Log in or Create an account to join the conversation.
- crh
-
- Offline
- Banned
- Posts: 101
- Thanks: 20
Re: Drag strip trip.
09 Jun 2013 13:59 - 09 Jun 2013 14:00zukdave wrote: From the first time we went to the track
Eric's said my bike would NEVER beat his ZRX.
This was 1/8 mile still have to beat him 1/4 mile.
Last time out Eric didn't bring his bike but
a buddy Will was there with his '99 ZRX 1100
with cams, carb's, and a pipe I beat him four in a row 1/4 mile.
Simple...YOU know how to ride.....They don't


Last edit: 09 Jun 2013 14:00 by crh.
Please Log in or Create an account to join the conversation.
- randysway223
-
- Offline
- User
- Posts: 4
- Thanks: 2
Re: Drag strip trip.
12 Jun 2013 20:21
Nice. how much did it run you to add the wheelie bars in the back? Love the effect, looks pretty cafe racer ish.
Please Log in or Create an account to join the conversation.
- zukdave
-
Topic Author
- Offline
- User
- Posts: 1685
- Thanks: 229
Re: Drag strip trip.
14 Jun 2013 22:15crh wrote:zukdave wrote: From the first time we went to the track
Eric's said my bike would NEVER beat his ZRX.
This was 1/8 mile still have to beat him 1/4 mile.
Last time out Eric didn't bring his bike but
a buddy Will was there with his '99 ZRX 1100
with cams, carb's, and a pipe I beat him four in a row 1/4 mile.
Simple...YOU know how to ride.....They don'tStill, even at that, beating the Rex in 1/4 mile says a lot!! You must have that 750 really working
Larry I'm beating them in the 330 foot to were they can't run
me down at the big end.
They gonna be real pissed after I send you my spare head
and do an 810cc kit behind their back.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Please Log in or Create an account to join the conversation.
- zukdave
-
Topic Author
- Offline
- User
- Posts: 1685
- Thanks: 229
Re: Drag strip trip.
14 Jun 2013 22:23randysway223 wrote: Nice. how much did it run you to add the wheelie bars in the back? Love the effect, looks pretty cafe racer ish.
I think about $35 buck's.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Please Log in or Create an account to join the conversation.
- lushbaugh
-
- Offline
- User
- everybodys a pro......
- Posts: 509
- Thanks: 35
Re: Drag strip trip.
16 Jun 2013 18:35
Hell yea Dave I went to the track last night, 15 bikes ran, 12 of them were in the eights, 3 were turbo. It was like bein on dope I was all pumped up
79 kz1000 ltd all apart
the best advice i can give is dont take dnthavakawmans advice..
the best advice i can give is dont take dnthavakawmans advice..
Please Log in or Create an account to join the conversation.
- zukdave
-
Topic Author
- Offline
- User
- Posts: 1685
- Thanks: 229
Re: Drag strip trip.
16 Jun 2013 22:08
Damn Lush where you been how's the turbo build going ?
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Please Log in or Create an account to join the conversation.