RFY shocks

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
12 Nov 2020 21:58 - 16 Nov 2020 08:38 #838411 by SWest
RFY shocks was created by SWest
Moved these clips to a new topic. There was another one in 2011 but it ended without a final verdict.
I'll be adding to this thread on how they work and if I have them rebuilt. :whistle:
Steve
kzrider.com/forum/5-chassis/434909-rfy-shocks?start=0

We'll see how these work out. Cheaper than a tire. :whistle:
Steve
Last edit: 16 Nov 2020 08:38 by SWest. Reason: Add text

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
14 Nov 2020 07:11 #838474 by SWest

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
14 Nov 2020 12:47 #838483 by SWest

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
14 Nov 2020 17:35 #838492 by SWest

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
15 Nov 2020 06:26 #838509 by SWest

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
16 Nov 2020 08:21 #838550 by SWest
Replied by SWest on topic RFY shocks
Getting my handling and ride height back. B)
Steve

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
17 Nov 2020 07:21 #838580 by SWest
Replied by SWest on topic RFY shocks
They say these are shipped without gas in them only a small amount of oil and air. I'm going to try putting more in them to see what happens. 75PSI seems a bit much so we'll see. :unsure:
Steve
www.caferacer.net/threads/cheap-e-bay-shocks.22408/

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
17 Nov 2020 18:52 - 17 Nov 2020 19:00 #838593 by SWest
Replied by SWest on topic RFY shocks
Got some interesting info on these shocks.
Steve
Page 14-25 rfy are rip off of ohlins 36 shocks but that lack the bleeder hole. Milled and drilled and taped mine for the screw
I asked if I should drill and tap the top boss or the bottom.
Either is fine. I installed a screw with a hole through it so a could attach a hose with the boss up and get all the air out of the oil side and set the level in the reservoir
Then he sent me this
Ohlins_General_WSM
Last edit: 17 Nov 2020 19:00 by SWest. Reason: text

Please Log in or Create an account to join the conversation.

More
18 Nov 2020 20:04 #838620 by Irish Yobbo
Replied by Irish Yobbo on topic RFY shocks
I've got the same shocks on my KZ750LTD. Really happy with them, they've been on for a few years now and held up well.

From what I've seen (and what everyone else as told me), the main issue with them is quality control, but not in the machining so much as the assembly. Without the bleeder getting them assembled without letting air into the oil is difficult, so while some are good out of the box, some are not. You can take the spring off without a compressor and try compressing the shock - if the travel is smooth all the way along, congratulations you've won the QC lottery! But sometimes there will be extra air in the line and it won't move smoothly. The only way to fix this is to tap in the bleed nipple as mentioned above, or dismantle and carefully reassemble without letting air in.

1981 KZ750 LTD
The following user(s) said Thank You: SWest

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
25 Nov 2020 07:42 #838909 by SWest

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
23 Jan 2021 21:33 #842275 by SWest

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum