Any Interest In Carburetor O-ring Kits?

  • Nessism
  • Topic Author
  • Offline
  • Sustaining Member
More
06 Sep 2022 16:02 - 06 Sep 2022 18:39 #873481 by Nessism
Replied by Nessism on topic Any Interest In Carburetor O-ring Kits?
I need help, again, from you Mikuni CV guys.  NOT Keihin, Mikuni.  More specifically, I need info on the drain screw in the float bowl.

- use calipers to measure the OD inside the O-ring groove of the drain screw.
- then measure the OD of the hole in the float bowl, that the screw goes into.

The kits I put together were for the Suzuki variant of the BS Mikuni carbs, but the KZ version has a couple of differences, and I don't have a carb in front of me so I can verify the proper fit.

Edit:  Z1 states the following...
OEM: 92055-044 supersedes 92055-028
D1 = 3.6mm
D2 = 1.75mm

Used on the carb drain screw on KZ1000C3 (some)/C4/J/K/M/P/R- KZ1100- KZ1300- KZ650H- KZ700- KZ750K/L/M/R- ZN1100- ZX750A

Edit 2:  I've placed an order (not from Z1,) and also ordered the last couple of sizes for kits for the Keihin CV34 O-rings too.  They should be here in a few days.  

 
Last edit: 06 Sep 2022 18:39 by Nessism.

Please Log in or Create an account to join the conversation.

More
06 Sep 2022 21:56 #873489 by Gdailey2112
Replied by Gdailey2112 on topic Any Interest In Carburetor O-ring Kits?
yep my bs34's have the screw sits low and on the side of bowls
not sure on exact size though, i didn't realize it varied

1982 KZ1100D1

Please Log in or Create an account to join the conversation.

  • Nessism
  • Topic Author
  • Offline
  • Sustaining Member
More
08 Sep 2022 18:59 - 08 Sep 2022 20:37 #873588 by Nessism
Replied by Nessism on topic Any Interest In Carburetor O-ring Kits?
Okay, dang it, now I need help with the pilot screw O-ring size for the Mikuni CV carbs.  I'm used to the Suzuki variant, which uses small O-rings on the tip of the screw.  But, the KZ variant uses O-rings at the other end.  

Edit: looks like 1.5 x 2.5mm  Gotta get some of these now...



 
Last edit: 08 Sep 2022 20:37 by Nessism.

Please Log in or Create an account to join the conversation.

  • Nessism
  • Topic Author
  • Offline
  • Sustaining Member
More
09 Sep 2022 16:22 #873615 by Nessism
Replied by Nessism on topic Any Interest In Carburetor O-ring Kits?

I am interested in a set o rings for both carburetors as I have 1980 KZ750 Ltd. and a 1981 KZ1000 Ltd., you never know when you are going to need them

I've got both sets ready to go now.  The 750 carbs are Keihin CV34's, and use a 67mm float bowl O-ring.  A couple of drops of threebond sealer, or superglue, in the groove, and then use tape to hold it in place until it dries.  For the 1000 carbs, I've got both pilot screw and pilot plugs O-rings in stock now.  
The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

More
19 Sep 2022 17:18 #874137 by riturbo
Replied by riturbo on topic Any Interest In Carburetor O-ring Kits?
Got mine the other day . Thanks so much .

Gpz 750 turbo The one I ride
Gpz 750 turbo Not finished
Gpz 750 turbo Not started
Gpz 550 1981
Gpz 550 1983
Bunch of other junk
The following user(s) said Thank You: Nessism

Please Log in or Create an account to join the conversation.

  • Nessism
  • Topic Author
  • Offline
  • Sustaining Member
More
19 Sep 2022 18:42 #874144 by Nessism
The following user(s) said Thank You: riturbo

Please Log in or Create an account to join the conversation.

  • Nessism
  • Topic Author
  • Offline
  • Sustaining Member
More
24 Sep 2022 15:16 #874454 by Nessism

Please Log in or Create an account to join the conversation.

More
25 Sep 2022 00:42 #874471 by Wookie58
Replied by Wookie58 on topic Any Interest In Carburetor O-ring Kits?
I got mine and Ness is a gentleman to deal with, at this price it's worth having a set in your "just in case" box 
The following user(s) said Thank You: Nessism

Please Log in or Create an account to join the conversation.

  • DOHC
  • Offline
  • Sustaining Member
  • Those Doe-Hawks really go!
More
25 Sep 2022 17:33 #874526 by DOHC
Replied by DOHC on topic Any Interest In Carburetor O-ring Kits?
PM sent.

'78 Z1-R in blue , '78 Z1-R in black, '78 Z1-R in pieces
My dad's '74 Z1
'00 ZRX1100
The following user(s) said Thank You: Nessism

Please Log in or Create an account to join the conversation.

  • Nessism
  • Topic Author
  • Offline
  • Sustaining Member
More
26 Sep 2022 19:00 #874651 by Nessism
Replied by Nessism on topic Any Interest In Carburetor O-ring Kits?
Need some help again, guys.

Does Kawasaki use O-rings on the fuel Tee or fuel transfer tubes on any variant of VM's?  Suzuki did, on at least one bike, so I've always included these O-rings with the kits.  I'm just starting to think that most KZ applications, if not all, won't use them.  I don't mind including them, mind you.  I bought a bag of 1000!  That should last a lifetime!  Anyway, please share your thoughts.

Please Log in or Create an account to join the conversation.

More
27 Sep 2022 01:34 - 27 Sep 2022 01:35 #874658 by zed1015
Replied by zed1015 on topic Any Interest In Carburetor O-ring Kits?

Need some help again, guys.

Does Kawasaki use O-rings on the fuel Tee or fuel transfer tubes on any variant of VM's?  Suzuki did, on at least one bike, so I've always included these O-rings with the kits.  I'm just starting to think that most KZ applications, if not all, won't use them.  I don't mind including them, mind you.  I bought a bag of 1000!  That should last a lifetime!  Anyway, please share your thoughts.
I have 10 sets of vm26 and 28 kz carbs and all have the rubber bonded fuel tees and tubes..
I've never seen a stock set of KZ carbs with 'O' ringed tees etc.

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-





Last edit: 27 Sep 2022 01:35 by zed1015.

Please Log in or Create an account to join the conversation.

More
12 Dec 2022 08:37 #877740 by Moose1800
Replied by Moose1800 on topic Any Interest In Carburetor O-ring Kits?

I got mine and Ness is a gentleman to deal with, at this price it's worth having a set in your "just in case" box 
I agree with Wookie, Nessism is a great person to deal with ! I bought a set a few weeks ago and I'm waiting for my choke plungers from zed 1015 another great trustworthy member to deal with !!!

Also Nessism you can quit including the fuel T/ transfer tube O-rings as zed 1015 said they aren't needed for Z1/KZ........Thanks!
The following user(s) said Thank You: Nessism

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum