Any Interest In Carburetor O-ring Kits?

wrote:

wrote:

I got mine and Ness is a gentleman to deal with, at this price it's worth having a set in your "just in case" box 

I agree with Wookie, Nessism is a great person to deal with ! I bought a set a few weeks ago and I'm waiting for my choke plungers from zed 1015 another great trustworthy member to deal with !!!

Also Nessism you can quit including the fuel T/ transfer tube O-rings as zed 1015 said they aren't needed for Z1/KZ........Thanks!

I'm still learning.  

GS Suzuki VM's have a model or two that use a fuel Tee & transfer tubes that are made from cast zinc, and they take O-rings.  I've defaulted to providing all the possible O-rings in the kits, even if they are not needed.  For example, GS VM's use both fuel and air pilot screws, so all are included in the kits.  For KZ's, it's either or.  Another thing, GS BS Mikuni CV carbs use an O-ring on the choke plunger cap, but KZ BS CV's don't.  Or at least the versions I've been rebuilding don't.  That's the thing, I don't know everything, and for all I know there could be a model bike that needs them.  I'd rather provide O-rings that aren't needed, instead of missing something.  Kawasaki changed up their carbs a lot over the years, even year over year.  Suzuki didn't, so they are easier to figure out.

Since I started selling O-rings last fall, I've sold the following number of sets...

Suzuki GS sets = 50
Kawasaki KZ sets = 12

The culture over at GSR is to rebuild the carbs fully, changing O-rings as part of the process.  Can't say this same mindset prevails here, other than, maybe, among the 900/1000 guys.
To be fair, I don't have kits for the KZ550, but that's not what's driving the huge disparity.    

Whacha got for the RS Flatslide series?

daveo wrote:

Whacha got for the RS Flatslide series?

I've never worked on a set of those, so can't say.  I certainly can't commit to having a set for them.

How about for BS34's x 4? I really need needle & seat O rings and for the pilot mixture needles, too. Thanx

Gdailey2112 wrote:

How about for BS34's x 4? I really need needle & seat O rings and for the pilot mixture needles, too. Thanx

I have KZ flavor BS34 kits.  The kit includes O-rings for the float valve seat, pilot screws, pilot plug, and drain screw.  I also include O-rings for the choke cap and fuel transfer tubes, if your carbs use O-rings in that location.  

My email is same as my user name + @ s b c g lo b a l DOT net

Do you still have a CV34 kit?

McThing wrote:

Do you still have a CV34 kit?

Sorry, I didn't see this until just now...Yes!  I have a CV34 O-ring kit.  Your Spectre carbs are slightly different from the earlier CV34's; you have float bowl vent Tee's.  The O-rings are the same size as the fuel Tee and fuel transfer tubes, and I include everything you need.

email me at nessism AT sbcglobal DOT net to discuss.

Nessism   please ignore this message 
\

gb    In order for your post here to appear   you must first post a introduction  in the New Member section 

Dave    Site Moderator

Sorry Ed      This is the only way I can currently reach out to new members
 

Would the VM kit be appropriate for VM29 Smooth Bores or are there some minor differences?

Ed your links don't work anymore. I was going to ask about needle seat O rings for the KZP I'm working on.
Steve. 
 
 

gb wrote:

Nessism, If you still have any available, I could use a set for the E1. 4 Mikuni

Sorry, I don't know what E1 4 Mikuni means.  Z1 VM28 Mikuni by chance?  If so, I've never worked on a set of those, just the later VM26 and VM28.  

As referenced in this thread, you can email me at nessism AT sbcglobal DOT net to discuss