Dutch 1977 Z1000 Build

More
31 Jan 2017 10:11 #753315 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Better to keep your phone close to you so you can call someone if you have a 230kg bike on your leggs :S

Please Log in or Create an account to join the conversation.

More
31 Jan 2017 10:15 #753316 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Hope it works out ok David.
Keep me informed.

Eric

Please Log in or Create an account to join the conversation.

More
31 Jan 2017 17:35 #753345 by Kawboy74
Replied by Kawboy74 on topic Dutch 1977 Z1000 Build
There is a torquing sequence in a service manual to follow for best results. Caution, as I had the same problem initially with my LTD and later found that the studs can be inconsistent on how much they project from the cases. I did not want to twist them into the cases and break off the pocket inside the motor, so I installed some Ape head studs which are deeper and it worked. I have checked other motors and found that the different groups of stud lengths do vary on occasion. This could become even more important if the head has been shaved etc.
Good Luck!
David

1974 Z1A As original as I could get it
'88 ZX750R braided lines, mostly original
KZ1000 project on the bench
Burlington,Ontario,Canada

Please Log in or Create an account to join the conversation.

  • DoctoRot
  • Offline
  • Sustaining Member
  • Oh, the usual... I bowl, I drive around...
More
01 Feb 2017 21:33 - 01 Feb 2017 21:39 #753447 by DoctoRot
Replied by DoctoRot on topic Dutch 1977 Z1000 Build

650ed wrote: I believe if you do that one too many times with a KZ you will find the sidestand tangs spread which will cause the bike to lean over further when it's on that stand. Ed


I tried it with my old KZ650 once and that's exactly what happened to the stock kickstand. I made a stainless kickstand for my SL1000 and do the pivot daily with no ill effects. Its actually quite easy once you get the hang of it. Picked that trick up in the alleys of Saigon, where that is often the only realistic way turn your bike around.
Last edit: 01 Feb 2017 21:39 by DoctoRot.

Please Log in or Create an account to join the conversation.

More
09 Feb 2017 07:47 - 09 Feb 2017 08:13 #753991 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Chimney to long.







Better :)
Last mod will be about 15 degrees up and then welding it and polishing.
Attachments:
Last edit: 09 Feb 2017 08:13 by Wiers.

Please Log in or Create an account to join the conversation.

More
09 Feb 2017 07:57 #753993 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Poor man's Chain tensioner.



Just for tryout.
Next month I have a trip to the US and will be ordering a professional one.







One of those 3, any advice which is better?

Eric
Attachments:

Please Log in or Create an account to join the conversation.

More
09 Feb 2017 08:11 #753994 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Tomorrow new fuel filters and then testdrive :woohoo: .

Starting it is easy, tuning the carbs is not.

vid18.photobucket.com/albums/b119/wrs/IMG_3729_zpsviqnrshh.mp4

A little bit rough in the beginning but once it is heated up it sounds okay.
Had to change the RPM wire from the Dyna, had 2 options and chose the wrong one and showed only half the RPM :lol:
Also paint is hardening once the engine is heating up.

I am trying to look at the header temps but do not get a good reading.
i have a infrared reader but it keeps showing different results.
Nr3 header is turning more purple than the other ones which are more yellow.

Also the fuel filters are not filling up fast enough to my like, I think engine is not getting enough fuel.
Will be installing other once tomorrow with shorter fuel lines.

Eric

Please Log in or Create an account to join the conversation.

More
09 Feb 2017 12:15 #754003 by davido
Replied by davido on topic Dutch 1977 Z1000 Build
Looks good Eric.Nice to hear it running. Good luck with the carbs,Maybe this helps!??

The different temps on the pipes. Did you synch the carbs yet? Would that account for it.
Im still struggling with mine,back to it at the weekend.

Anyway,are you going to make it to the Motorbeurs in Utrecht at the end of the month? I got my bike accepted to show,so itll be there in the
metal If youre going to be there,we can have a beer.

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)
Attachments:

Please Log in or Create an account to join the conversation.

More
09 Feb 2017 12:33 #754005 by 531blackbanshee
Replied by 531blackbanshee on topic Dutch 1977 Z1000 Build

Wiers wrote:
Just for tryout.
Next month I have a trip to the US and will be ordering a professional one.







One of those 3, any advice which is better?

Eric


i have used the one with the skateboard wheel on a customers bike.no idea how it performed tho :whistle: .

i have heard that the ones with the sprocket are really noisy tho fwiw.

hth,

leon

skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

More
09 Feb 2017 14:17 #754008 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
David,
Good to have your bike on the show, I did not know about the motorbeurs.
I have to work that weekend but maybe I can go on Friday, I l will let you know if I can make it.

I did not sink the carbs yet I do not have the skills to do that and intended to bring it to a Kawa specialist.
Also for advice about fixing the head gasket.

Eric

Please Log in or Create an account to join the conversation.

More
09 Feb 2017 14:25 #754009 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Leon,
The one with the skateboard wheel looks better but I think the other one keeps the chain more aligned.
I have to do some more research on the web to make a decision.

Eric

Please Log in or Create an account to join the conversation.

More
09 Feb 2017 16:10 - 09 Feb 2017 16:13 #754020 by 750 R1
Replied by 750 R1 on topic Dutch 1977 Z1000 Build

Wiers wrote: Leon,
The one with the skateboard wheel looks better but I think the other one keeps the chain more aligned.
I have to do some more research on the web to make a decision.

Eric


Don't worry about alignment Weirs, that's what the front and rear sprockets are for. alignment is no problem at all... {unless a sprocket falls off :woohoo: } How much did you cut off the muffler ? I have the same one except without the tag, cheap Chinese but well made... What did you do to mount yours, mine has the same coupling set up ?
Last edit: 09 Feb 2017 16:13 by 750 R1.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum