HollywoodMX's Drouin Supercharged 77 KZ1000!!

531blackbanshee wrote: i hear ya on the header,i have had several ideas that looked better in my head than in real life :sick: .

and if it doesn't tie in like you want,like you say paint it black.

i'm just giving you a hard time.

it seems like you take it well :lol: .

i can't wait to see how it turns out. :evil:

leon

Ya no worries. I think the bugging is pretty funny. :silly:

So its been a bit slower..I was tired and it has been raining for 2 weeks..

Here is what's going currently. I have ordered a couple parts for my super E carb...well turns out its a super G carb. On top of that it was more modified than I thought. I have discovered it has been bored out on both the manifold and intake side. So this thing "could be" all top end.. Will have to see once I use it unfortunately.

I got the first round of clear on the tank, seat, sprocket and starter cover. The tank and seat do have a bit of the orange peel effect so I will sand this weekend and clear again with more of a wet instance to finish it off. I will also touch up the few blemishes on the wheels and clear them.

I rushed the painting of the swing-arm and wasn't happy with it fully so I'm going to redo it.

The bigger the better with that carb.
I thought it was a Super 'D' you had got ???
I have a 'G' on mine and it's a great improvment with the accel pump on.
Still need to go bigger though (a 'D' would be ideal).
Remember the original injector was 55mm so it's all about getting big chunks of air into that blower, especially to avoid restriction at the top.


Just been back through this thread and it IS a 'D' you have.

zed1015 wrote: The bigger the better with that carb.
I thought it was a Super 'D' you had got ???
I have a 'G' on mine and it's a great improvment with the accel pump on.
Still need to go bigger though (a 'D' would be ideal).
Remember the original injector was 55mm so it's all about getting big chunks of air into that blower, especially to avoid restriction at the top.


Just been back through this thread and it IS a 'D' you have.

Hahaha! You are right! Just measured 57mm same as a D. I wonder why I thought I had an e carb.. Then I thought I had the G cause I thought they got bigger with the letters, and then I thought it was bored cause G stopped at 2 1/16. Stupid thing is I bought a couple super e parts..fail!

Well on the bright side my machine shop buddy got his computerised mill back running so he was going to make me the flange for the carb and the foot peg block mounts.

Ok so I am having battle of the striped wheels to get perfection in the line that separates the black and white. I have taped both the wheels 6 times total as a tiny bit of over spray seems to make its way to the other color no matter what I do. Like doing the seat I have been screwing around with this for 4 weekends. Well I finally finished it tonight and they are ready for clear this weekend if it doesn't rain.


I also re sanded and primered the swing arm. and boxed up majority of the wiring at the side panel.

Looking back I wonder how much re-work I have done in this project, I am guessing its 25%+.

Wanting a perfect bike isn't a bad thing Keep up the great work, you're almost there!

Devin

you know like dory say's in finding nemo :lol: !!!

Dory: [singing] Just keep swimming. Just keep swimming. Just keep swimming, swimming, swimming. What do we do? We swim, swim.

:silly:

leon

wrong powerplant but i thought you might enjoy the pics.

twwhlspls.com/5/

leon

650mod wrote: Wanting a perfect bike isn't a bad thing Keep up the great work, you're almost there!

Thanks man. Ya its getting close..

Devin

531blackbanshee wrote: you know like dory say's in finding nemo :lol: !!!

Dory: [singing] Just keep swimming. Just keep swimming. Just keep swimming, swimming, swimming. What do we do? We swim, swim.

:silly:

leon

Lol!!!! Sometimes I feel just that, like I am constantly swimming.. :silly:

531blackbanshee wrote: wrong powerplant but i thought you might enjoy the pics.

twwhlspls.com/5/

leon

That's super sweet! I haven't seen that one. Bimota engine too, I bet that worth a lot of $$$!! That speedo is bad ass.

So I'm STILL messing with the paint... Found some more small imperfections. I really just need to leave things alone... lol.

I will clear it tomorrow hopefully. I really need to move forward on this bike and it all starts with a rolling chassis.

I needed to close the gap in the swing arm pivot. It's about 1 mm off so I made some hi-tech custom spacers, it was slightly dangerous! Ghetto fab! Zed eat your heart out.. :silly: :whistle: :woohoo:

Also lightly polished the rear axle pin and bolt. And got my custom boots made to my foot specs!

Ok making some progress. My buddy made my mounts for my brackets, they almost fit, my engineering was slightly off so some tinkering is required but you get the idea.

He also welded my gas cap idea for 74 Benelli gas tank for my TR1 project!

The wheels and valve cover are 2k cleared now and done, I was successful in my wet coats with those. I tried to do the same wet coat on the body pieces but I didn't fair so well there. So off to the sanding club again as I got too many runs. I lacquered the swing arm, it needs some light sanding as I attempted to push the limits of a wet coat there too, but its an easy fix to get that right. I am out of clear so I will have to hit the supply store this coming week.

My buddy also autocadded my new manfold for the new carb.