- Posts: 23035
- Thank you received: 2759
'76 KZ900 (ZRX1200R) Build
- SWest
-
- Offline
- Sustaining Member
- 10 22 2014
14 Jul 2016 19:47 - 14 Jul 2016 19:48 #734988
by SWest
Replied by SWest on topic '76 KZ900 (ZRX1200R) Build
When I took my pump apart in 13, the flat plate had shallow grooves in it. The clearance between the gears were in spec but I took the best parts from two others I had to make one. The plate I sanded with #600 paper on a sheet of glass. Now I have plenty of pressure, maybe too much.No problems for three years. 
Steve
Steve
Last edit: 14 Jul 2016 19:48 by SWest. Reason: sp
Please Log in or Create an account to join the conversation.
- spdygon
-
- Offline
- Platinum Member
- NakedFun
-
Topic Author
- Offline
- User
- NakedFun
-
Topic Author
- Offline
- User
29 Jul 2016 15:36 #736640
by NakedFun
2008 Kawasaki Concours 14
1999 Kawasaki ZRX1100
1976 Kawasaki KZ900
Replied by NakedFun on topic '76 KZ900 (ZRX1200R) Build
Seat is done....my plan is coming together......
Cory
Cory
2008 Kawasaki Concours 14
1999 Kawasaki ZRX1100
1976 Kawasaki KZ900
Please Log in or Create an account to join the conversation.
- Johnno
-
- Offline
- User
- 531blackbanshee
-
- Offline
- Vendor
- spdygon
-
- Offline
- Platinum Member
- NakedFun
-
Topic Author
- Offline
- User
07 Aug 2016 16:21 #737747
by NakedFun
2008 Kawasaki Concours 14
1999 Kawasaki ZRX1100
1976 Kawasaki KZ900
Replied by NakedFun on topic '76 KZ900 (ZRX1200R) Build
Little teaser....more to come over the next few days.
Cory
Cory
2008 Kawasaki Concours 14
1999 Kawasaki ZRX1100
1976 Kawasaki KZ900
Please Log in or Create an account to join the conversation.
- Johnno
-
- Offline
- User
- NakedFun
-
Topic Author
- Offline
- User
- NakedFun
-
Topic Author
- Offline
- User
08 Aug 2016 08:15 #737834
by NakedFun
2008 Kawasaki Concours 14
1999 Kawasaki ZRX1100
1976 Kawasaki KZ900
Replied by NakedFun on topic '76 KZ900 (ZRX1200R) Build
Well good new and bad news. Good news is that I am picking up my frame from the Powdercoater finally after they have redone it like 3 times due to issues. Bad news is they sent me this picture.
Now I don't doubt I have a pin hole in the joint since I had to stitch weld the additional frame reinforcements and probable screwed this up just a bit, but they are claiming the PC defect is due to this. Not sure how it could be, but oh well. Going to grind down the PC and mask off the area and use a Rustoleum Texture Black spray paint to feather and blend it in. It will be under the tail section rubber mount anyway, so it will hardly ever be seen.
I post my wins and failures......this case a little bit of both.
Cory
Now I don't doubt I have a pin hole in the joint since I had to stitch weld the additional frame reinforcements and probable screwed this up just a bit, but they are claiming the PC defect is due to this. Not sure how it could be, but oh well. Going to grind down the PC and mask off the area and use a Rustoleum Texture Black spray paint to feather and blend it in. It will be under the tail section rubber mount anyway, so it will hardly ever be seen.
I post my wins and failures......this case a little bit of both.
Cory
2008 Kawasaki Concours 14
1999 Kawasaki ZRX1100
1976 Kawasaki KZ900
Please Log in or Create an account to join the conversation.
- NakedFun
-
Topic Author
- Offline
- User
08 Aug 2016 17:24 #737907
by NakedFun
2008 Kawasaki Concours 14
1999 Kawasaki ZRX1100
1976 Kawasaki KZ900
Replied by NakedFun on topic '76 KZ900 (ZRX1200R) Build
So here are a couple of shots. Couldn't wait so I quick threw on the forks and swinger. I think I like it.....
Up close....
And with the rolling stock......
Need to do some "cleaning up" of the powdercoat before the shocks can go on, etc....
Cory
Up close....
And with the rolling stock......
Need to do some "cleaning up" of the powdercoat before the shocks can go on, etc....
Cory
2008 Kawasaki Concours 14
1999 Kawasaki ZRX1100
1976 Kawasaki KZ900
Please Log in or Create an account to join the conversation.