- Posts: 631
- Thank you received: 106
New project.1428 turbo or supercharged, Who knows?
- turboking
-
- Offline
- User
- kaw-a-holic
-
- Offline
- User
- LarryC
-
- Offline
- User
- zed1015
-
Topic Author
- Offline
- User
- zed1015
-
Topic Author
- Offline
- User
17 Mar 2014 07:55 - 17 Mar 2014 11:47 #625530
by zed1015
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-
Replied by zed1015 on topic New project.1428 turbo or supercharged, Who knows?
Engine all back together, it started first kick and ticks over nicely.
It is running in the pic honest!
A little smokey on the over run but that should clear after a few miles ( if it doesn't then those cheap replacement rings are rubbish and i'll be inserting a set of wiseco's).
Had a short 10mph ride along the path and my fulcrum clutch works real well with it biting around half way in the lever travel with one finger operation.
A few pic's of the wiring etc I was gonna post before the camshaft incident.
Simple wiring in the tail with main fuse on insulated spades
Dyna coils converted to spade fittings with screwed on surface mounts
Rest of the wiring , horn and reg/rec just fits under the tank
Riders eye view of the Danmoto speedo. It's very clear but couldn't get a decent shot with the camera.
Just a few snagging jobs to do, a rear guard for the carbs, a bit of paint here and there and apart from sorting the jetting etc it's done
It is running in the pic honest!
A little smokey on the over run but that should clear after a few miles ( if it doesn't then those cheap replacement rings are rubbish and i'll be inserting a set of wiseco's).
Had a short 10mph ride along the path and my fulcrum clutch works real well with it biting around half way in the lever travel with one finger operation.
A few pic's of the wiring etc I was gonna post before the camshaft incident.
Simple wiring in the tail with main fuse on insulated spades
Dyna coils converted to spade fittings with screwed on surface mounts
Rest of the wiring , horn and reg/rec just fits under the tank
Riders eye view of the Danmoto speedo. It's very clear but couldn't get a decent shot with the camera.
Just a few snagging jobs to do, a rear guard for the carbs, a bit of paint here and there and apart from sorting the jetting etc it's done
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-
Last edit: 17 Mar 2014 11:47 by zed1015.
Please Log in or Create an account to join the conversation.
- kaw-a-holic
-
- Offline
- User
- Tusch
-
- Offline
- User
- spdygon
-
- Offline
- Platinum Member
- LarryC
-
- Offline
- User
17 Mar 2014 19:06 #625594
by LarryC
Larry C.
Replied by LarryC on topic New project.1428 turbo or supercharged, Who knows?
Congrats! 
A true hand crafted work of art!
A true hand crafted work of art! Larry C.
Please Log in or Create an account to join the conversation.
- Hollywoodmx
-
- Offline
- User
- turboking
-
- Offline
- User