- Posts: 622
- Thank you received: 19
1975 KZ 900 , ZRX Swingarm, 89 GSXR front end
- tk11b40
- Topic Author
- Offline
- User
I was thinking a bushing, which the longer bolt would clamp down on, the bushing would be a slip fit into a peice of round urethene. In the early 80's long travel dirt bikes used a simular deal on the lower side of the chain.
I want to make two. First one I can mail to you, then if it works (you have a running bike to try it on), I;ll make the second for me.
What do you think?
Digital speedo, I would sure like to see a photo.
This weekend I got much done, well much for me, I move slow. Being a perfectionist gets in the way of progress. I cut into the lower bosses of the foot peg bolts like you recommended, looks real tight there. That sucks cause now the powder coat...:S
I also ran some oil cooler lines. I have never been a fan of the way the Japanese do it with two herken lines rubbing parallel beside the motor, so I tried something I have not seen yet.
341 gave me an oil cooler a few years ago, thanks Troy!!
What do you think?
Suzuki GSXR 750 slabside
Ducati S4R
Husqvarna FE 350s
Please Log in or Create an account to join the conversation.
- tk11b40
- Topic Author
- Offline
- User
- Posts: 622
- Thank you received: 19
Suzuki GSXR 750 slabside
Ducati S4R
Husqvarna FE 350s
Please Log in or Create an account to join the conversation.
- tk11b40
- Topic Author
- Offline
- User
- Posts: 622
- Thank you received: 19
BTW, that is an awesome clip of the guy smokin the rear tire around the track...
Suzuki GSXR 750 slabside
Ducati S4R
Husqvarna FE 350s
Please Log in or Create an account to join the conversation.
- tk11b40
- Topic Author
- Offline
- User
- Posts: 622
- Thank you received: 19
Bike porn...Yummy!
Is this the Speedo? Will she install it?
Seriously,
I have questions.
1. how do you wire the tach assuming the Vapor has one?
2. how was the quality overall?
3. have you tried their rectifier?
Suzuki GSXR 750 slabside
Ducati S4R
Husqvarna FE 350s
Please Log in or Create an account to join the conversation.
- mark1122
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thank you received: 109
the oil lines look PRO! Nice work on the clamps.
I love the Swiss cheese look.Very cool.
Do u have a Dana2000 to run the tack?
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- 531blackbanshee
- Offline
- Vendor
- Posts: 7447
- Thank you received: 797
leon holmes
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Please Log in or Create an account to join the conversation.
- Calhoun
- Offline
- User
- Hayabusa= I ride to the strip club in flip flops
- Posts: 303
- Thank you received: 1
Made in the U.S.A.
I really like mine!
It has a clock and thermometer and cool blinky lights.
I hooked the Tach wire to the coil wire instead of the plug wire and it works very well.
Mine pooped out on me and they sent me a new one with no hassles.Great customer service.
It has been perfect.
You can program the yellow light as a shift light and the red one as red line. How cool is that. The backlight is white and easy to see.
I ordered a kit for the Suzuki SV650 because my front wheel is similar.It is super quick to install and calibration was not that bad either.
80 IT175, 84 XL200, XT250, 95 ST1100 96 xr650l (30k miles),kz1000, KX250 97'
Last and most important 93 KX500.
Please Log in or Create an account to join the conversation.
- mark1122
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thank you received: 109
Just a heads up, clear the paint on the bars for a good ground under the horn side controls, or add a horn ground.I had horn issues due to this.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- tk11b40
- Topic Author
- Offline
- User
- Posts: 622
- Thank you received: 19
That bushing may work just fine Ted.i have reamed the motor mount bolt holes out to the next size.my bolt measures 9.36mm or .369". Thanks.
the oil lines look PRO! Nice work on the clamps.
I love the Swiss cheese look.Very cool.
Do u have a Dana2000 to run the tack?
I have not decided on ignition but the Dyna 2000 seems to be the best choice. If I use the Vapor that would seal it. no tach cables spinning around and slopping oil.
The roller should be complete by Saturday 28th. I sketched one out, and since I got no lathe in the garage, Ed the magical tool maker has graciously volunteered to make 2.
I am thinking this is the ticket, so you get to test fire it. The roller would hold up real good with a bearing, but the bushing wieghs a whole lot less, and the only thing its for is so the Nylon roller gets spun a littel instead of gouged.
Suzuki GSXR 750 slabside
Ducati S4R
Husqvarna FE 350s
Please Log in or Create an account to join the conversation.
- tk11b40
- Topic Author
- Offline
- User
- Posts: 622
- Thank you received: 19
Thank you thank you.
The vapor it is. That should be about winter though, the track will no doubt reveal some gremlin i will have to chase around.
Suzuki GSXR 750 slabside
Ducati S4R
Husqvarna FE 350s
Please Log in or Create an account to join the conversation.
- tk11b40
- Topic Author
- Offline
- User
- Posts: 622
- Thank you received: 19
tk11b40 wrote:
I am putting th bike together for the last time,
Hahahahahahahahahahahahahahahahahahahahahahahahahahahaha
hahahahahahahahahahahahahahahahahahahahahahahahahahahaha
hahahahahahahahahahahahahahahahahahahahahahahahahahahaha
hahahahahahahahahahahahahahahahahahahahahahahahahahahaha
Phew, well, ummm, last time, last time he says, last
time, chortle, snicker, guffaw. There is no last time, you can never escape, the mod addiction has you. All is lost, give up hope now. Last time, really.
Hahahahahahahahahahahahahahahahahahahahahahahahahahahaha
hahahahahahahahahahahahahahahahahahahahahahahahahahahaha
hahahahahahahahahahahahahahahahahahahahahahahahahahahaha
Troy341
Man I am already rethinking some stuff......
I wish you was here Troy.......
I need answers Scotty answers!!!
Suzuki GSXR 750 slabside
Ducati S4R
Husqvarna FE 350s
Please Log in or Create an account to join the conversation.
- mark1122
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thank you received: 109
www.acewell-meter.com/c1.php
I'm looking forward to triing the roller. Thanks.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.