KZ1000 won't start after carb cleaning

More
11 Jul 2020 11:06 #830374 by Mikaw
Replied by Mikaw on topic KZ1000 won't start after carb cleaning

Kidkawie wrote: Do yourself a favor and install a Dyna pickup.


+1
1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.

Please Log in or Create an account to join the conversation.

More
11 Jul 2020 11:21 #830375 by Rick H.
Replied by Rick H. on topic KZ1000 won't start after carb cleaning
TSK, TSK, TSK....Dyna's are for girls! Points and condensers are for men!!!

Rick H.
Rick H.

1977 Kawasaki KZ-1000A1
The following user(s) said Thank You: 650ed

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
11 Jul 2020 11:43 #830377 by Scirocco
Replied by Scirocco on topic KZ1000 won't start after carb cleaning
Rick, be carefull. A lot of Dyna pussy´s reading here.... :laugh: :laugh: :laugh:
My 1975 Z 1 B 900 Project

www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode

Please Log in or Create an account to join the conversation.

More
11 Jul 2020 15:02 #830392 by Kidkawie
Replied by Kidkawie on topic KZ1000 won't start after carb cleaning

Rick H. wrote: TSK, TSK, TSK....Dyna's are for girls! Points and condensers are for men!!!

Rick H.


You must send text messages via smoke signals.
1975 Z1 900
1994 KX250 Supermoto
2004 KX125

Please Log in or Create an account to join the conversation.

More
12 Jul 2020 05:35 - 12 Jul 2020 08:41 #830443 by magilla
Replied by magilla on topic KZ1000 won't start after carb cleaning
Well, the issues with the lighting circuits must have been related to the moisture, because when I started trying to track down the shorts, the voltages were back up to 12.5V on both of those circuits with no overheating of the fuses. It has been hot and dry here for several days. It was great to get the bike out again, I rode about 60 miles yesterday. I think I need to adjust the carbs. After riding about 30 miles, the bike seemed to be missing a little at idle, and I couldn't adjust the idle down any lower than about 2,000 rpm. The idle setting procedure in the manual is for the 26mm carbs. Mine are the 28mm carbs that don't have pilot screws on the bottom. There are adjusting screws on the tops, are these the pilot screws?
1979 KZ1000-B3 LTD
Carrollton, Illinois
Last edit: 12 Jul 2020 08:41 by magilla.
The following user(s) said Thank You: Oncle Raoul

Please Log in or Create an account to join the conversation.

More
12 Jul 2020 08:16 - 12 Jul 2020 08:17 #830455 by F64
Replied by F64 on topic KZ1000 won't start after carb cleaning
I'm glad the bike sorted itself out electrically.
Thanks for the update.
The others will be able to help you out on the fueling side. :)
81-KZ440-D2.
Louis Dudzik's GM HEI ignitor conversion installed 2015 s3.amazonaws.com/gpzweb/Ignition/GPZgmHEImod.html
Motogadget m-unit blue installed 2017.
LIC, NY
Last edit: 12 Jul 2020 08:17 by F64.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links