vm26,28 or 29?

so i have a 1979 kz1000 that im rebuilding the carbs on and i need to rejet them cause im going pod filters and 4 to 1 header. i have researched a couple places but i cant figure out what carbs i have either vm26,28 or 29 cause iv had different people tell me different things. I think i will go 120 mains and 17.5 pilots (from what research ive done it says to go this route) if i should go with another jet size please let me know. Im new to motorcycles and carbs. im more of a EFI and turbo guy

Hello, Welcome to forum,

give us a little help by posting pictures of carbs....both sides.

thanks, spencer

If they are 29's look for this square....




Look for multi circles in the intake

Can you post a right side view and rear view of the carbs?

from what i read i what mikuni said the stock carbs are vm26ss

also where can i find that broke plastic piece that controls the choke. i tried seeing if z1 enterprise has some but couldn't find them.

Im going to say those are the stock 28 pumpers

www.z1enterprises.com/ItemDetails.aspx?i...ylon&item=ZSM073-014

oh its a LTD as well witch is why it makes me think there 26's

Ive heard of 26mm carbs with accel pumps but ive never actually seen them,All the pumper carbs Ive ever had in my hands were 28s.
Measure the inside of carbs on engine side and see how big they are

rome11six wrote: oh its a LTD as well witch is why it makes me think there 26's

I would say 28's also.