Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Forum
Technical Forums
Carburetor
DynoJet install, Drilling out the Slider?

TOPIC:

DynoJet install, Drilling out the Slider? 12 May 2009 14:09 #290565

  • Johnny Red
  • Johnny Red's Avatar Topic Author
  • Offline
  • User
  • 80 KZ750 H LTD
  • Posts: 55
  • Thank you received: 0
I have a 81 KZ750 LTD, Im installing the Dynojet Stage 3 kit.
The kit says to drill out the side hole, but there is two side holes. Photo attached.

Do I drill out both or just one?
Attachments:

Please Log in or Create an account to join the conversation.

Last edit: by Johnny Red.

DynoJet install, Drilling out the Slider? 12 May 2009 14:14 #290566

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • Posts: 5078
  • Thank you received: 29
With a marker- show the exact front of the slide (engine side)
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

DynoJet install, Drilling out the Slider? 12 May 2009 14:16 #290567

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • Posts: 5078
  • Thank you received: 29
Did you get 2 needles or four needles with your kit?
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

DynoJet install, Drilling out the Slider? 12 May 2009 14:22 #290568

  • Johnny Red
  • Johnny Red's Avatar Topic Author
  • Offline
  • User
  • 80 KZ750 H LTD
  • Posts: 55
  • Thank you received: 0
Engine side of Slide.
Attachments:

Please Log in or Create an account to join the conversation.

DynoJet install, Drilling out the Slider? 12 May 2009 14:24 #290570

  • Johnny Red
  • Johnny Red's Avatar Topic Author
  • Offline
  • User
  • 80 KZ750 H LTD
  • Posts: 55
  • Thank you received: 0
I got 4

Please Log in or Create an account to join the conversation.

DynoJet install, Drilling out the Slider? 12 May 2009 14:26 #290571

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • Posts: 5078
  • Thank you received: 29
looking at the picture, it looks like that someone has already drilled the second hole. This is the hole on the right as you are looking at the picture. I would be willing to bet that hole is EXACTLY at the SIDE of the RIGHT side of the slide as it goes into the carb, and the carb faces forward
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

DynoJet install, Drilling out the Slider? 12 May 2009 14:28 #290573

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • Posts: 5078
  • Thank you received: 29
Now take a picture of the TOP OF THE DIAPHRAGM DOME. looking down the slide hole.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000

Please Log in or Create an account to join the conversation.

DynoJet install, Drilling out the Slider? 12 May 2009 14:29 #290574

  • Johnny Red
  • Johnny Red's Avatar Topic Author
  • Offline
  • User
  • 80 KZ750 H LTD
  • Posts: 55
  • Thank you received: 0
all four slides have two holes. I drilled out the right hand side about 15 minutes ago and was starting to drill the left side and stoped to post this topic. so the right is drilled and the left is half way drilled, but not all the way through.

Please Log in or Create an account to join the conversation.

DynoJet install, Drilling out the Slider? 12 May 2009 14:31 #290575

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • Posts: 5078
  • Thank you received: 29
Show me a picture like this.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Attachments:

Please Log in or Create an account to join the conversation.

DynoJet install, Drilling out the Slider? 12 May 2009 14:35 #290576

  • Johnny Red
  • Johnny Red's Avatar Topic Author
  • Offline
  • User
  • 80 KZ750 H LTD
  • Posts: 55
  • Thank you received: 0
Looking inside

Please Log in or Create an account to join the conversation.

DynoJet install, Drilling out the Slider? 12 May 2009 14:39 #290577

  • otakar
  • otakar's Avatar
  • Offline
  • User
  • Posts: 5078
  • Thank you received: 29
Do you see that GREEN Mark? That is the Diaphragm locating notch. I need to see where it is on the carburetor and on the diaphragm itself.
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Attachments:

Please Log in or Create an account to join the conversation.

Last edit: by otakar.

DynoJet install, Drilling out the Slider? 12 May 2009 14:40 #290578

  • Johnny Red
  • Johnny Red's Avatar Topic Author
  • Offline
  • User
  • 80 KZ750 H LTD
  • Posts: 55
  • Thank you received: 0
ok Looking inside the carb

Please Log in or Create an account to join the conversation.
Forum
Technical Forums
Carburetor
DynoJet install, Drilling out the Slider?
Powered by Kunena Forum
PDM Custom Fabrications
Half Evil Customs