Header pics

More
03 Apr 2009 16:30 #278163 by Pfaelzer
Replied by Pfaelzer on topic Header pics
That was my Kerker back in 78/79. Good looking system but lost a lot of cornering clearance. Had a custum exhaust made by "Lehnhart" which came up on the left side of the bike and allowed access to the oilfilter. I have to look for some old pics.
1977 KZ 1000
Queen Creek, Arizona

Please Log in or Create an account to join the conversation.

More
03 Apr 2009 16:35 #278166 by Pfaelzer
Replied by Pfaelzer on topic Header pics
1977 KZ 1000
Queen Creek, Arizona

Please Log in or Create an account to join the conversation.

  • mark1122
  • Topic Author
  • Offline
  • User
  • Keep twisting it
More
04 Apr 2009 10:23 #278350 by mark1122
Replied by mark1122 on topic Header pics
OK, you can stop teasing me now.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

More
04 Apr 2009 17:40 #278430 by MDawnz1
Replied by MDawnz1 on topic Header pics
OK here is more info on the Bassani for Z1 pipe ,

First, ALL of Mcdroid's #'s are right on ,
But I have some more for you ,

At the head fittings, where it contacts the gasket,
ID 1.425"
Collector ID 2.9"
Collector inner ID 2.150"
Mid pipe ID 2.90"


This pipe is almost 30 years old and has 50.000 miles on it and getting pretty beat ..........














I told you there was some trick inside this pipe .
1974 Z1a, still 903

Please Log in or Create an account to join the conversation.

  • Mcdroid
  • Away
  • User
  • Gone Kwackers
More
04 Apr 2009 18:03 #278432 by Mcdroid
Replied by Mcdroid on topic Header pics
Let me add to MDawnZ1's data:

Measurements are at the head fitting at the gasket.

Mac ID 1 3/8" OD 1 1/2"
Kerker ID 1 1/4" OD 1 1/2"

Note the Bassani has a larger ID than either the Mac or Kerker.
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

  • Mcdroid
  • Away
  • User
  • Gone Kwackers
More
04 Apr 2009 18:06 #278434 by Mcdroid
Replied by Mcdroid on topic Header pics
mark1122 wrote:

Mcdroid wrote:

Comparison of the V&H and the Mac pipe (same pipe as in the previous pictures). V&H on the right.

400


Do u have any #s for the V&H ?


No, the pipe is on one of the bikes...I was hoping someone else would supply these.
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

More
04 Apr 2009 18:37 - 04 Apr 2009 18:39 #278438 by MDawnz1
Replied by MDawnz1 on topic Header pics
Lets try this again ...........


400









I hope it worked this time ,,,,
1974 Z1a, still 903
Attachments:
Last edit: 04 Apr 2009 18:39 by MDawnz1.

Please Log in or Create an account to join the conversation.

More
04 Apr 2009 18:38 #278439 by MDawnz1
Replied by MDawnz1 on topic Header pics
400
1974 Z1a, still 903
Attachments:

Please Log in or Create an account to join the conversation.

  • Mcdroid
  • Away
  • User
  • Gone Kwackers
More
05 Apr 2009 01:00 #278535 by Mcdroid
Replied by Mcdroid on topic Header pics
MDawnZ1...now that I have a Bassani, what does the end cap look like (mine came w/out a baffle/endcap)?
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

More
05 Apr 2009 04:55 #278542 by ponyjr
Replied by ponyjr on topic Header pics
does anyone know if any of these pipes will fit a 82 gpz 1100. i have a "krackler" 4-1 with a mac muffler on it and it drags the ground every time i make a hard right. i drags at the collector.

Please Log in or Create an account to join the conversation.

  • mark1122
  • Topic Author
  • Offline
  • User
  • Keep twisting it
More
05 Apr 2009 05:34 #278551 by mark1122
Replied by mark1122 on topic Header pics
MDawnz1 ,that collector does seem odd . any thoughts on why? the sound wave will expand there and be compressed by atmospheric preasure. Thats a bad thing. thats why the megaphone was suposed to help,it would expand slower at a controlled rate which would increse speed? Just like the shape at the end of a rocket.
I dont know why they say that theory worked but the modern pipes dont use it.
This is all very interesting.:S
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

  • mark1122
  • Topic Author
  • Offline
  • User
  • Keep twisting it
More
05 Apr 2009 05:39 #278552 by mark1122
Replied by mark1122 on topic Header pics
MDawnz1 wrote:

Lets try this again ...........


400









I hope it worked this time ,,,,


What are the ID, OD, of the 2 sleeve peices?
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links