Phoenix Fighter

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
20 Mar 2016 19:20 #716416 by SWest
Replied by SWest on topic Phoenix Fighter
Put them on your gauges and see what each carb is doing. It could be cam timing but I doubt it. Uploading a vid. I'll look at yours when it's done.
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
20 Mar 2016 19:50 #716426 by 79MKII
Replied by 79MKII on topic Phoenix Fighter
I bought brand new flatslides and they sounded like that...could never get used to it. I sold them and went back to my 33 smoothbores. Definitely sounds like something else is wrong though. Checking the sync with vacuum would be a good start. Very strange....
The Kaw List:
Current: 79 KZ1000 A3 MKII, 78 KZ1000 A2, 78 KZ1000 Z1-R, 78 KZ650 SR, 80 KE175
Former: 03 KLX400SR, 99 ZRX1000, 82 KZ750 LTD, 80 KZ1000 A4 MKII, 80 KZ1000 LTD, 78 KZ1000 A2, 74 H-2 750 Triple, 78 KL250

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
20 Mar 2016 19:57 #716427 by SWest
Replied by SWest on topic Phoenix Fighter
My lead carb was way up while #4 was close behind.The other two were low. Popping out of the carbs and running like bad sparks. Made the vacuum even and it all went away. :)
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
20 Mar 2016 20:08 #716433 by kaw-a-holic
Replied by kaw-a-holic on topic Phoenix Fighter
The flat slide clacking doesn't bother me. It goes away when you get off idle anyway. I will try putting my gauges on and see whats up there. I think I will pull the cam cover and double to make sure my cam timing is correct also.
Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
20 Mar 2016 20:21 #716437 by SWest
Replied by SWest on topic Phoenix Fighter
Good idea. It was running with the 36's wasn't it?
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
20 Mar 2016 20:22 #716438 by kaw-a-holic
Replied by kaw-a-holic on topic Phoenix Fighter

swest wrote: Good idea. It was running with the 36's wasn't it?
Steve


Yes, that's what makes it a head scratcher.
Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
20 Mar 2016 20:27 #716440 by SWest
Replied by SWest on topic Phoenix Fighter
Float levels too.
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
20 Mar 2016 20:32 #716442 by kaw-a-holic
Replied by kaw-a-holic on topic Phoenix Fighter
Float levels are as good as I can get them without being able to do a clear tube test. That is the only thing I don't like about the RS carbs.
Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
20 Mar 2016 21:10 #716452 by SWest
Replied by SWest on topic Phoenix Fighter
Do they have the main jet cap like my 33's? I was looking at rubber corks at the hardware store. Easy enough to make a tester.
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
20 Mar 2016 21:58 #716463 by kaw-a-holic
Replied by kaw-a-holic on topic Phoenix Fighter

swest wrote: Do they have the main jet cap like my 33's? I was looking at rubber corks at the hardware store. Easy enough to make a tester.
Steve


Hmmm, a cork may work. I also thought about tapping and putting a nipple in it.
Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
20 Mar 2016 22:00 #716464 by SWest
Replied by SWest on topic Phoenix Fighter
JetsRus has caps for the Miks. They might have one for yours too. I made my own but one of them would be a better tool.
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
21 Mar 2016 16:39 #716616 by SWest
Replied by SWest on topic Phoenix Fighter
Jon, what are those ports on the side of the carbs? My 33's won't run for SHT without my air box.
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links