1982 KZ1000 to Fighter..

thats awesome jack.

thanks for the breakdown buddy.

what gauge is the wire in your multi conductor cable?

leon

Thanks Boost I am trying to be good so santa will bring me one this year!

Nelson wrote: thanks. that's super cool. I may get inspired to do this to my bike. I suppose I could buy only the ignition switch and eliminate the key even if I don't do the whole thing. Will the magnet-key-thingamajig work if the battery dies?

Yep, you can do just the M-Lock on any bike. Just tie it to a relay and you are good to go. In fact it comes with one that you can use. (Don't need it if you tie it to the M-Unit). I am going to be removing the key on my Victory and using an M-Lock as well.

The operating range of the M-Lock is 7-18VDC and the power draw on the is only 2mA stand by
100mA in operation. So if the battery still had a little juice you should be able to get it to work. As a backup plan, one I intend to use myself is to just have an inline micro switch to close the contacts if needed.

531blackbanshee wrote: thats awesome jack.

thanks for the breakdown buddy.

what gauge is the wire in your multi conductor cable?

leon

Sorry Leon, missed this question. Both control cables are 20ga for the inputs.

Spent some time on the bike this weekend, weather was shitty, so couldn't get distracted by riding. My goal was to get the the throttle bodies mounted and wired in as well as get a good bit of the EFI wired up.

This is what I started with so I wasn't expecting much, lol..



Got the TB's mounted. Still waiting on my permanent band clamps.





Made up and wrapped a new injector harness. I will wrap the entire harness like this once its all done "and tested" lol


And done... (90%, still have to wire in the igniters) Im about soldered out!!


Stuck the tank on to check clearances, etc. Will be nice when it can go on and stay on!!

Man this is a really great build , I to am going to use the m unit as i really like all the functions as well . what are you using for a speedo and tach ?

Freakin beautiful man wow I love it!!

Bike it looking tough man. Can't wait to see you fire it up.

Hadn't looked at this project in quite a while. Good progress. I like that M unit. Are you using a Micro Squirt for your fuel injection?

Thanks guys... I'm dieing to get it fired up as well. Gotta get the exhaust issue worked out before I can do that, but it's not far from being able to fire., or try to... Lol

Rich, I have not made a decision on that yet. I have 3-4 setups in mind, but will more then likely be all digital and small. I will post some pics of the ones I'm looking at. To many choices out there. I'm sure it will be influenced by the lighting I choose as well.

OK, speaking of the front of the bike.. I need some opinions. I originally bought this with the intention of putting it on this bike and I like it, but... What do you think? Go naked or put it on??

With out it...



With it...




Opinions?

One vote for yes, put it on. Ed