KZR's Bikes of the Month for 2024

Mikuni VM 33 Carbs

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
13 Mar 2016 16:21 #715257 by SWest
Replied by SWest on topic Mikuni VM 33 Carbs
A good argument for syncing the carbs. Though they looked good on the bench, #3 the lead carb was at 30 when the rest were at 19, #4 was at 29. Had to loosen #3 arm on the shaft to make it come down, then tighten it. Not much but enough to throw everything off. Finally got them close enough. I'll put some miles on it to let things settle in, then do it again. No more popping out of the pipe and one cylinder running lean.
The "nipples" :lol: are easy to get to and are a pleasure to use. B)
They're perky. :woohoo:
Steve

Please Log in or Create an account to join the conversation.

More
13 Mar 2016 17:50 #715278 by daveo
Replied by daveo on topic Mikuni VM 33 Carbs

swest wrote: The "nipples" :lol: are easy to get to and are a pleasure to use. B)
They're perky. :woohoo:
Steve


Perky... :whistle:

While you are at it, could you measure something for me?


1982 KZ1100-A2

Attachments:

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
13 Mar 2016 18:07 #715279 by SWest
Attachments:

Please Log in or Create an account to join the conversation.

More
13 Mar 2016 18:29 - 13 Mar 2016 18:30 #715288 by daveo
Replied by daveo on topic Mikuni VM 33 Carbs

swest wrote: 3 3.4" approx 4 1/4". Those carbs look good.
Steve


Thanks Steve, your last pic got it. 3.5"

Oh, nice perky's BTW :)

1982 KZ1100-A2

Last edit: 13 Mar 2016 18:30 by daveo.

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
13 Mar 2016 19:37 #715296 by SWest

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
14 Mar 2016 19:55 #715447 by SWest
Replied by SWest on topic Mikuni VM 33 Carbs
You can't really tell by the video, the revs are quicker and it pulls stronger.
Steve

Please Log in or Create an account to join the conversation.

More
14 Mar 2016 23:31 - 14 Mar 2016 23:34 #715467 by daveo
Replied by daveo on topic Mikuni VM 33 Carbs

swest wrote: You can't really tell by the video, the revs are quicker and it pulls stronger.
Steve


Sounds like the juice is flow'n pretty good!

A couple years ago a riding buddy got T-boned by the front wheel of a John Deere farm tractor that the driver had turned to cross the road a split-second after I past him. The guy was driving along in the ditch with the left rear tire just off the pavement when I passed.
I held lane position, but my buddy had to cross the double yellows to avoid running directly into the side of the tractor, and likely would have made it if he'd been riding a Kawasaki instead of a Harley.
I watched the whole event in my 4" left mirror, just to the point where his right forward foot peg exploded at impact. I looked away at that point, and turned around at the next driveway not knowing if he would be alive when I got back there. He was laying flat-out in a grassy field, about 40 feet off the road, and was ok except for the pulverized bones in his right foot, but the Harley was terminated.
That unfortunate situation immediately ended my buddy's riding career, and he didn't get a ticket for crossing the yellows because the tractor driver failed to yield.
My philosophy on riding is that a person can be too careful, but must be able to ride like hell to avoid a problem when only an instant of time is available, and not be afraid to do it.

1982 KZ1100-A2

Last edit: 14 Mar 2016 23:34 by daveo.

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
15 Mar 2016 05:26 - 15 Mar 2016 05:28 #715472 by SWest
Replied by SWest on topic Mikuni VM 33 Carbs
I know what you mean. In the wreck the guy I was riding with passed the truck on the right shoulder. I held back until I could pass legally. I saw the driver in his mirror as he pulled over to the right so I dropped down and started to roll it on. He turned left and left me nowhere to go. As it happened I started to avoid him but realized I wasn't going to make it so I put it on it's side and stepped off. That's all I remember. My skid mark was less than 6' long and was a J pattern. It was just on the other side of the double yellow. I got a ticket in the mail for passing in a intersection, lost my licence for a year because I didn't report it within 10 days. I was in the FK'n hospital. 3 illegals in a stake bed truck. :angry:
In this case it's another prick in the car trying to keep me behind him. You'll notice the distance between the cars as they spread out to prevent passing. It happens all the time this time of year. Out of stater's. While the jerk is grinning in his mirror, I grab a handful when I see an opening and go, leaving him in his angry pathetic little world. :evil:
Steve
Last edit: 15 Mar 2016 05:28 by SWest.

Please Log in or Create an account to join the conversation.

More
15 Mar 2016 05:57 #715477 by daveo
Replied by daveo on topic Mikuni VM 33 Carbs
The fine line we pine... :kiss:

1982 KZ1100-A2

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
15 Mar 2016 06:08 #715479 by SWest
Replied by SWest on topic Mikuni VM 33 Carbs
I don't pine for anything. I ether go out and get it or leave it there to stink. :whistle: :lol:
Steve

Please Log in or Create an account to join the conversation.

More
15 Mar 2016 06:22 #715483 by daveo
Replied by daveo on topic Mikuni VM 33 Carbs

swest wrote: I don't pine for anything. I ether go out and get it or leave it there to stink. :whistle: :lol:
Steve


:ohmy: :pinch: Just outside of town, the line grows wider. B)

1982 KZ1100-A2

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
15 Mar 2016 06:52 #715493 by SWest

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.