KZR's Bikes of the Month for 2024

1973 Z1 Maui

More
17 Dec 2021 07:04 #859202 by MauiZ1
Replied by MauiZ1 on topic 1973 Z1 Maui
Yes, these are different than later models, mine are ok but worn so I'm wanting to get some fresh ones.

Please Log in or Create an account to join the conversation.

More
17 Dec 2021 07:46 #859204 by MauiZ1
Replied by MauiZ1 on topic 1973 Z1 Maui
Yes, the double ended type nylon lifter was for the later 217 type carbs. The simple one, which I need, is for the 147 early carbs. They sure made lots of little changes along the way. I think maybe more than the early Honda CB750's
I'm anxious to see how my refurbished plungers work.
 

Please Log in or Create an account to join the conversation.

  • hardrockminer
  • Offline
  • Sustaining Member
More
17 Dec 2021 18:40 #859242 by hardrockminer
Replied by hardrockminer on topic 1973 Z1 Maui
I think your plungers are the same as later carb models so the 2170 ones would work in a pinch.  But no sense switching them out if yours still work.  If it's just the yellow colour bothering you that can be fixed.  Try ultra sonic to clean them up and if that isn't good enough then a little soda or bead blasting will do the trick.
I have several restored bikes along with a 2006 Goldwing with a sidecar. My wife has a 2019 Suzuki DR 650 for on and off road.

Please Log in or Create an account to join the conversation.

More
18 Dec 2021 18:09 #859285 by MauiZ1
Replied by MauiZ1 on topic 1973 Z1 Maui
Today I got fork oil in, fixed a cold solder on the rear brake switch, filled it with oil and cold cranked it for oil pressure. Very nervous wait for the oil light to go out. It didn’t take long and after it first went out it goes out quickly. I wish I could peek under the valve cover.
Attachments:

Please Log in or Create an account to join the conversation.

More
19 Dec 2021 13:51 #859315 by MauiZ1
Replied by MauiZ1 on topic 1973 Z1 Maui
In the photo, piece 62 is listed as overflow clamp. It’s a rubber bungee with a round end and an oblong end. Does anyone know how it mounts? The parts book doesn’t really illustrate it location.

Please Log in or Create an account to join the conversation.

More
19 Dec 2021 14:16 - 19 Dec 2021 14:22 #859316 by Mikaw
Replied by Mikaw on topic 1973 Z1 Maui
It goes around #18 upper rear engine bolt spacer?

this is #17 spacer but for example 



1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.
Last edit: 19 Dec 2021 14:22 by Mikaw.

Please Log in or Create an account to join the conversation.

More
19 Dec 2021 19:09 #859329 by MauiZ1
Replied by MauiZ1 on topic 1973 Z1 Maui
Ok, I see now,thank you and Merry Christmas 

Please Log in or Create an account to join the conversation.

More
21 Dec 2021 07:04 #859407 by MauiZ1
Replied by MauiZ1 on topic 1973 Z1 Maui
Exhaust went on yesterday, fairly smooth. I had the rear axle in backwards, had to swap that so the nut wasn't in the way. Getting closer to test running the engine.

Please Log in or Create an account to join the conversation.

More
21 Dec 2021 07:45 #859408 by Skidmark
Replied by Skidmark on topic 1973 Z1 Maui
Beautiful work, but those rear shocks have got to go!!!  I know those are on just to hold the bike up at the moment.
Retired gearhead
'81 KZ-750 E2
'87 Suzuki Savage 650 Street Tracker (lost in the shop fire)

Please Log in or Create an account to join the conversation.

More
21 Dec 2021 08:59 #859416 by Mikaw
Replied by Mikaw on topic 1973 Z1 Maui
Getting there and quickly. Nice work!
1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
21 Dec 2021 11:53 #859424 by Wookie58
Replied by Wookie58 on topic 1973 Z1 Maui
Looking really nice, soon be going down the road 
1982 KZ1000 Ltd
www.kzrider.com/forum/11-projects/617631...-82-begins?start=192
kzrider.com/filebase-alias?view=download...d-fault-diagnosis&ca

Please Log in or Create an account to join the conversation.

More
21 Dec 2021 13:05 #859429 by MauiZ1
Replied by MauiZ1 on topic 1973 Z1 Maui
The dynamo cover was pretty banged up but I kept it to have some patina to the bike.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.