- Posts: 115
- Thank you received: 9
Wakt out KZ1000
- waktaylor
-
Topic Author
- Offline
- User
15 Oct 2018 10:31 #792330
by waktaylor
Replied by waktaylor on topic Wakt out KZ1000
This engine must have ran like shit all the way till it didn't.
#2 rings were so stuck i had to pull the wrist pin, leave the piston in the cylinder and remove the entire assembly. Then hammer the piston out.
Too bad I also broke off the mounting boss for the missing timing chain guide rail
Looking for a "new" cylinder set.
Kyle
#2 rings were so stuck i had to pull the wrist pin, leave the piston in the cylinder and remove the entire assembly. Then hammer the piston out.
Too bad I also broke off the mounting boss for the missing timing chain guide rail
Looking for a "new" cylinder set.
Kyle
Please Log in or Create an account to join the conversation.
- waktaylor
-
Topic Author
- Offline
- User
15 Oct 2018 18:01 - 16 Oct 2018 04:59 #792345
by waktaylor
Replied by waktaylor on topic Wakt out KZ1000
Cleaned the block/transmission and liberally applied Por-15. now NONE of the screws will be removable. This shit is like metal when it dries. Not what I was going for.. minor mistake
Last edit: 16 Oct 2018 04:59 by waktaylor.
Please Log in or Create an account to join the conversation.
- TexasKZ
-
- Offline
- Platinum Member
- waktaylor
-
Topic Author
- Offline
- User
- waktaylor
-
Topic Author
- Offline
- User
19 Oct 2018 10:00 #792546
by waktaylor
Replied by waktaylor on topic Wakt out KZ1000
Can you spot all the non kawa parts?
Please Log in or Create an account to join the conversation.
- waktaylor
-
Topic Author
- Offline
- User
19 Oct 2018 15:18 #792564
by waktaylor
Replied by waktaylor on topic Wakt out KZ1000
Test fitting most of the parts today
Please Log in or Create an account to join the conversation.
- waktaylor
-
Topic Author
- Offline
- User
- DOHC
-
- Offline
- Sustaining Member
- Those Doe-Hawks really go!
- waktaylor
-
Topic Author
- Offline
- User
- waktaylor
-
Topic Author
- Offline
- User
22 Oct 2018 19:04 #792700
by waktaylor
Replied by waktaylor on topic Wakt out KZ1000
Day cutting and grinding. Custom rear set mounts and passenger peg mounts to come.
Please Log in or Create an account to join the conversation.
- waktaylor
-
Topic Author
- Offline
- User
23 Oct 2018 14:26 #792732
by waktaylor
Replied by waktaylor on topic Wakt out KZ1000
Engine apart bam!
Please Log in or Create an account to join the conversation.
If you like KZR Please consider making a donation. Thank you.
KZRider is free, but not without cost.
Please consider chipping in a few bucks to help cover the cost of running the KZR servers.