KZR's Bikes of the Month for 2024

Z800 Cafe Fighter Chopper thing GEOMETRY SPECS

More
23 Jun 2012 09:02 #531197 by turboguzzi
Replied by turboguzzi on topic Z650 Café Fighter Chopper thing

royalratch wrote: Where do you install the temp sensor?


simplest solution is instead of the oil level sensor in the sump cover

Please Log in or Create an account to join the conversation.

More
10 Jul 2012 17:38 #535109 by Minus32
Replied by Minus32 on topic Z650 Café Fighter Chopper thing
Could I ask where/who you use to cnc your new billet parts? The finish looks superb. I've got a few parts I need building myself.

1977 KZ650 American Import - A Street Tracker in the making...

Please Log in or Create an account to join the conversation.

More
18 Jul 2012 18:12 #536848 by royalratch
Replied by royalratch on topic Z650 Café Fighter Chopper thing
The yokes are a one-off and that guy doesn't generally do work anymore.

The calliper hanger etc is a company called Moore Speed Racing near Wimborne, UK.

Please Log in or Create an account to join the conversation.

More
02 Aug 2012 07:56 #540206 by Minus32
Replied by Minus32 on topic Z650 Café Fighter Chopper thing

royalratch wrote: The yokes are a one-off and that guy doesn't generally do work anymore.

The calliper hanger etc is a company called Moore Speed Racing near Wimborne, UK.


Thanks mate, will look into it.

1977 KZ650 American Import - A Street Tracker in the making...

Please Log in or Create an account to join the conversation.

More
06 Oct 2012 08:08 #552729 by royalratch
Replied by royalratch on topic Z650 Café Fighter Chopper thing
Hey all. Small update.

The project forges ahead, a bit yo yo on progress but deffo on the finishing straight.

Frame has been sent to powdercoaters and also for seat to be made. I've basically asked for a seat like this:




Also, all other parts for powder-coating, anodising and fork sliders for DLC or Nitriding have been stripped and sent off. Frame and swingarm also.




The engine is on track for a full rebuild / 810 pistons / GPZ cams at Debbens after a delay waiting for new clutch rubbers from the Aussies. But on its way now. I basically gave them a GPZ motor and another Z750 one to find 4 sets of rods, valves etc that all match up in weight and bearing life as a better starting point. It will also get new drive chains, bearings, shells etc etc - a proper nut and bolt build finished with stainless exhaust studs, ARP rods and stainless fasteners where possible - should look great when done.


Whilst I'm waiting, back to the computer for a small but very important detail - side panel badges! I was planning on going with a custom 'Z800' badge but I'm sure it will be very pricey and may turn out crap.





The side badges below are still available from a replica maker and are genuine designations.


Nice 750 Twin Cam emblem...




GPZ750 is obviously cool - and kind of correct as it's a GPZ motor




Or I thought this traditional Kawasaki racing flag looked pretty cool too...






There's loads more here:

www.reproductiondecals.com/default_frame...aw_content.html~main

www.badgereplicas.com.au/badges_kawasaki.htm#other


Stay tuned.

Please Log in or Create an account to join the conversation.

More
14 May 2013 03:18 #587282 by CruisingRam
Replied by CruisingRam on topic Z650 Café Fighter Chopper thing
I was tuned about 7 months ago?

1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.

Please Log in or Create an account to join the conversation.

More
14 May 2013 08:48 #587296 by 650ed
Replied by 650ed on topic Z650 Café Fighter Chopper thing
Did he give up on it? So many do. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
14 May 2013 09:35 #587304 by Juicyk
Replied by Juicyk on topic Z650 Café Fighter Chopper thing
This build is awesome! Original and cool. Kind of reminds me of the guys at classified moto style of bike just with better paint haha!

Graphic Designer that likes to get out from behind the computer to get greasy!

Please Log in or Create an account to join the conversation.

  • testarossa
  • Offline
  • User
  • Attack life, it's only trying to kill you.
More
14 May 2013 10:27 #587311 by testarossa
Replied by testarossa on topic Z650 Café Fighter Chopper thing

650ed wrote: Did he give up on it? So many do. Ed


Actually, Ratch has had very slow but steady progress. It seems that we may not see anything for 6 months at a time, and then there is a flurry of progress updates. Sounds to me like he is taking his time and doing it right.

However, I do agree that alot of these projects experience failure to launch.

1978 KZ1000 A2 Click--->Build Thread
2004 ZX-10R
2007 Harley Sportster 1200
2020 Harley Street Glide Special
Angola, IN

Please Log in or Create an account to join the conversation.

More
14 May 2013 11:10 #587318 by 650ed
Replied by 650ed on topic Z650 Café Fighter Chopper thing
Agree. I saw he was pouring a lot of $$$$ into it for 1st class bits & pieces. I was wondering if he hit the limit of his budget and put it on hold or sold it. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
14 May 2013 19:31 #587437 by turboguzzi
Replied by turboguzzi on topic Z650 Café Fighter Chopper thing
i hope he can pull it off, but so many unfinished projects here could have been running bikes giving joy to people if they only didnt try reinventing the wheel, keeping closer to stock.

all of my race bikes have required about 300 hours of work which i try to try and perform in no more than three-fouor months straight. that means a good 3 hours in the garage every day after work. spread that over one hour a day and progress becomes painfuly slow over a year or more...

pains me how many good bikes end up in pieces for spares.

Please Log in or Create an account to join the conversation.

More
16 May 2013 14:13 - 18 May 2013 05:42 #587742 by royalratch
Replied by royalratch on topic Z650 Café Fighter Chopper thing
A little faith lads!

I have been busy on the bike but whats slowing me down is not having time to pit into it. But I have set myself a deadline and that this Summer - so check it out. More to follow in the next few days as I get the whole thing built back up.

Okay guys. A bit of progress at last.

Engine build. Pistons in!




Almost there. Main cases Matt Black and covers in Gloss Black. Just needs to be boltd up with shiny Stainless stuff - it'll look mean, like its got Gold Teeth or something...






Got the frame and motor back now as well a bunch of bits and pieces anodised / painted ready for a sort of pre-final assembly.

Having issues with engine mounting as I have the incorrect mount kit so need to get on that. But heres where we are.

Frame with Motor in. Engine built by Debben with new Dyna-S, new Stator, manual tensioner, APE Head Rods, stainless case bolts and new starter. Happy with seat too though I may go with a rise in the rear for support under acceleration.







Flying Tiger did an awesome job on the paint. After the 3rd test we hit the nail on the head - its a Citoroen car colour called Hickory Brown and I love it. Its awesome because in the dark it looks like gloss black almost but when the light hits it, it comes to life.





Tank and panels on.




Tank badge is genuine new.




Side panel badges are replicas - but spot on.




Next up is to sort engine mounting and start on the loom. Then just exhaust to order as the final 'part' I need. I have an idea for the silencer tho - need to mock it up.

Am also having ANOTHER rear caliper bracket made as the last one was just too ugly. When thats back I can get the whole thing built up.
Last edit: 18 May 2013 05:42 by royalratch.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.