- Posts: 247
- Thank you received: 16
Oil in carbs?
- Beaner242
- Topic Author
- Offline
- User
Less
More
27 Jul 2023 16:40 #887660
by Beaner242
1982 KZ1000K LTD Chopper
Oil in carbs? was created by Beaner242
Just pulled my filters off to clean them. Each carb had a small amount of oil on the lip and in the filter? Never seen this before. It got ran pretty hard last weekend, would that have something to do with it? Any ideas? Thanks
1982 KZ1000K LTD Chopper
Please Log in or Create an account to join the conversation.
- TexasKZ
- Away
- Platinum Member
Less
More
- Posts: 7579
- Thank you received: 2233
27 Jul 2023 20:01 #887667
by TexasKZ
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
Replied by TexasKZ on topic Oil in carbs?
Could the filters have been over oiled when they were last installed?
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
Please Log in or Create an account to join the conversation.
- Warren3200gt
- Offline
- User
Less
More
- Posts: 1494
- Thank you received: 713
27 Jul 2023 20:54 #887668
by Warren3200gt
Replied by Warren3200gt on topic Oil in carbs?
It's probably evaporated fuel if you used ethanol laced fuel. The residue from evaporated ethanol fuel is brown. When fully evaporated its looks like a varnish, this is what clogs carbs if bikes are left for a while without draining the carbs.
There's no engine fluids that get to carbs other than fuel.
There's no engine fluids that get to carbs other than fuel.
The following user(s) said Thank You: howardhb
Please Log in or Create an account to join the conversation.
- Beaner242
- Topic Author
- Offline
- User
Less
More
- Posts: 247
- Thank you received: 16
28 Jul 2023 04:46 #887676
by Beaner242
1982 KZ1000K LTD Chopper
Replied by Beaner242 on topic Oil in carbs?
Yes, but not that much. And this was like engine oil.
Thanks warren. That could be it. Just seemed excessive I got fuel at 3 different stations last weekend though.
Thanks warren. That could be it. Just seemed excessive I got fuel at 3 different stations last weekend though.
1982 KZ1000K LTD Chopper
Please Log in or Create an account to join the conversation.
- Wookie58
- Offline
- Moderator
Less
More
- Posts: 4177
- Thank you received: 2388
28 Jul 2023 04:48 #887677
by Wookie58
Replied by Wookie58 on topic Oil in carbs?
Is it fair to assume that you are running pods and the crankcase is venting to atmosphere ?
Please Log in or Create an account to join the conversation.
- Beaner242
- Topic Author
- Offline
- User
Less
More
- Posts: 247
- Thank you received: 16
- Wookie58
- Offline
- Moderator
Less
More
- Posts: 4177
- Thank you received: 2388
28 Jul 2023 06:09 #887679
by Wookie58
Replied by Wookie58 on topic Oil in carbs?
When you "into filter" is this a separate unit or the air filter (normally if the breather is connected to the air filter oil in the intake is a sign of excessive crankcase pressure)
Please Log in or Create an account to join the conversation.
- Beaner242
- Topic Author
- Offline
- User
Less
More
- Posts: 247
- Thank you received: 16
28 Jul 2023 06:19 #887680
by Beaner242
1982 KZ1000K LTD Chopper
Replied by Beaner242 on topic Oil in carbs?
Sorry yes I have pods and a separate filter/breather on the case.
1982 KZ1000K LTD Chopper
Please Log in or Create an account to join the conversation.
- Wookie58
- Offline
- Moderator
Less
More
- Posts: 4177
- Thank you received: 2388
28 Jul 2023 06:27 #887681
by Wookie58
Replied by Wookie58 on topic Oil in carbs?
There aren't too many options for oil to get into the intake under these circumstances, a leaking valve seal would normally result in the oil being drawn in and burnt. it would be very unusual for oil to find it's way out to the carb intakes ???
Please Log in or Create an account to join the conversation.
- Beaner242
- Topic Author
- Offline
- User
Less
More
- Posts: 247
- Thank you received: 16
28 Jul 2023 06:34 #887682
by Beaner242
1982 KZ1000K LTD Chopper
Replied by Beaner242 on topic Oil in carbs?
Thanks. That’s what I thought. Like Warren said. Prob a fuel issue. Just never noticed it before
1982 KZ1000K LTD Chopper
Please Log in or Create an account to join the conversation.
- F64
- Offline
- User
- 81-KZ440D2
Less
More
- Posts: 1117
- Thank you received: 401
28 Jul 2023 09:08 - 28 Jul 2023 14:50 #887686
by F64
81-KZ440-D2.
Louis Dudzik's GM HEI ignitor conversion installed 2015 s3.amazonaws.com/gpzweb/Ignition/GPZgmHEImod.html
Motogadget m-unit blue installed 2017.
LIC, NY
Replied by F64 on topic Oil in carbs?
You may be dealing with intake reversion and leaky valve seals.
www.motortrend.com/how-to/ctrp-1008-intake-reversion/
Your exhaust pipe may be sending a strong positive pressure wave back to the cylinder during overlap at certain rpm's.
This is due to pipe length and internal size changes of the primary pipe.
Collector design and placement plays a role as well.
Two stroke tuners have been use this tuning method to their advantage.
You can use it as well but you need to do the math.
The cloud of fuel above the intake trumpets shows reversion in action on the Renault F1 engine.
www.motortrend.com/how-to/ctrp-1008-intake-reversion/
Your exhaust pipe may be sending a strong positive pressure wave back to the cylinder during overlap at certain rpm's.
This is due to pipe length and internal size changes of the primary pipe.
Collector design and placement plays a role as well.
Two stroke tuners have been use this tuning method to their advantage.
You can use it as well but you need to do the math.
The cloud of fuel above the intake trumpets shows reversion in action on the Renault F1 engine.
81-KZ440-D2.
Louis Dudzik's GM HEI ignitor conversion installed 2015 s3.amazonaws.com/gpzweb/Ignition/GPZgmHEImod.html
Motogadget m-unit blue installed 2017.
LIC, NY
Last edit: 28 Jul 2023 14:50 by F64.
The following user(s) said Thank You: Nessism
Please Log in or Create an account to join the conversation.
- Nessism
- Offline
- Sustaining Member
Less
More
- Posts: 7460
- Thank you received: 2828
29 Jul 2023 06:03 #887698
by Nessism
Replied by Nessism on topic Oil in carbs?
Are the valves adjusted properly? If the intake valves are hanging open, there may be a bit more blow back.
Please Log in or Create an account to join the conversation.