- Posts: 1685
- Thank you received: 229
1/4 mile on the ole KZ!
- zukdave
- Offline
- User
Any of the 120-130/ 18" tires on the market now will spin way before it slip's on the rim.
Now if you got room and want to stay with a spoked 18" rim a 150/60/18 Shinko 006 Podium on a 3 1/2" rim is hands down the stickiest 18" tire you can buy.
I'm about half way through my second one the only reason I'd switch tire is if I did 17" wheel swap to run a Hookup.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Please Log in or Create an account to join the conversation.
- z1kzonly
- Offline
- User
- Sustaining Member
- Posts: 2817
- Thank you received: 524
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Please Log in or Create an account to join the conversation.
- TheTrout
- Topic Author
- Offline
- User
- Posts: 185
- Thank you received: 66
1978 KZ1000B2
Please Log in or Create an account to join the conversation.
- KZB2 650
- Offline
- User
- Posts: 1475
- Thank you received: 265
I found a station that's not to much of a drive for me that sells 91 octane pure gas (ethanol free) on the pure-gas.org website that's suppose to give a little more power but its pretty minor..... but I figure every bit helps
1978 KZ650 b-2
700cc Wiseco kit 10 to 1.
1980 KZ750 cam, ape springs, stock clutch/ Barnett springs.
Vance and Hines Header w/ comp baffle and Ape pods, Dyna S and green coils, copper wires.
29MM smooth bores W/ 17.5 pilots, 0-6s and 117.5 main
16/42 gearing X ring chain and alum rear JT sprocket.
Please Log in or Create an account to join the conversation.
- Street Fighter LTD
- Offline
- Moderator
- TURBO, Its Better to be Blown than Injected
- Posts: 4906
- Thank you received: 2052
TheTrout wrote: Bike has been running great! Looking forward to the next race. I think I am going to leave the tire I have on there for one more race. My question today is about running race fuel. I always run premium, but would some high octane race fuel make a difference? Would it hurt anything? I use to go to the sand dunes with my buddies on our 3 wheelers. The guys riding the Honda 350x's said premium was enough, But my ported and polished 250r sure ran better on 110 octane race fuel. Anyone have any experience running race fuel in their KZ?[/quote
Call Corrigan oil in Brighton MI. They can tell you where near you they have a station selling race gas ( Turbo Blue probably ).
As far as needing it , probably not needed but sure smells good burning .
I use it when racing but I run high boost turbo motor
Dave
Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
Please Log in or Create an account to join the conversation.
- TheTrout
- Topic Author
- Offline
- User
- Posts: 185
- Thank you received: 66
1978 KZ1000B2
Please Log in or Create an account to join the conversation.
- TheTrout
- Topic Author
- Offline
- User
- Posts: 185
- Thank you received: 66
On a side note, drag racing mini bikes are way cool! I think I might build one.
1978 KZ1000B2
Please Log in or Create an account to join the conversation.
- zukdave
- Offline
- User
- Posts: 1685
- Thank you received: 229
When it's a 100 degrees in the shade and we have unshaded staging lane's it's a bitch to sit there in
in full leather's for 5 or 10 mintue's.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Please Log in or Create an account to join the conversation.
- TheTrout
- Topic Author
- Offline
- User
- Posts: 185
- Thank you received: 66
1978 KZ1000B2
Please Log in or Create an account to join the conversation.
- TheTrout
- Topic Author
- Offline
- User
- Posts: 185
- Thank you received: 66
One other worthy note. I've always struggled with my reaction times and often they were in the .3 second range, which really sucks and will lose you a lot of races. I talked to a friend at the track and asked what his secret was. No big secret really, but his advice did help me some. He said he counts down the tree like "1 2 3 go!". Just doing that got my reaction times to around .15 or less. I think with more practice it will get better. Anyone else have any techniques you use to cut a good light?
1978 KZ1000B2
Please Log in or Create an account to join the conversation.
- Reifer
- Offline
- User
- Posts: 23
- Thank you received: 2
1974 Z1
1978 kz1000
1979 kz1000
1981 GPz1100
1993 ZX 7
1995 KX 250
2000 ZRX 1100
2002 ZX12
Please Log in or Create an account to join the conversation.
- TheTrout
- Topic Author
- Offline
- User
- Posts: 185
- Thank you received: 66
1978 KZ1000B2
Please Log in or Create an account to join the conversation.