Permatex No 1 Gasket Maker is CRAP!

  • clutch
  • Topic Author
  • Offline
  • User
  • I wish I had a tad more patience to do it better!
More
31 Oct 2011 15:07 #486294 by clutch
Replied by clutch on topic Permatex No 1 Gasket Maker is CRAP!
I'm thinking jb weld will hold up against gas (and ethanol :sick:). I don't mind making a permanent bond on the plate itself. It definitely would be a pain to get tha stuff into the threaded area, but at this point I want to fix it and forget it. If I have to clean up a little squeeze out quickly with a rag, I will. If it will work, I think it's worth the extra effort to make sure it's cleaned up in there :)
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...

Please Log in or Create an account to join the conversation.

  • clutch
  • Topic Author
  • Offline
  • User
  • I wish I had a tad more patience to do it better!
More
31 Oct 2011 15:09 #486295 by clutch
Replied by clutch on topic Permatex No 1 Gasket Maker is CRAP!
This is from the JB Weld website:

"Q: Is J-B Weld resistant to water and/or gasoline?

A: When fully cured, J-B Weld is completely resistant to water, gasoline, and about every other petroleum product or automotive chemical. For wet-surface or submerged water or gasoline repairs, see our J-B Stik or Waterweld product information. "
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...

Please Log in or Create an account to join the conversation.

  • clutch
  • Topic Author
  • Offline
  • User
  • I wish I had a tad more patience to do it better!
More
31 Oct 2011 16:27 - 31 Oct 2011 16:27 #486315 by clutch
Replied by clutch on topic Permatex No 1 Gasket Maker is CRAP!
Just found a bunch of posts on a ifferent forum, with people saying the ethanol gasoline eats through jb weld. :huh:
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...
Last edit: 31 Oct 2011 16:27 by clutch.

Please Log in or Create an account to join the conversation.

  • clutch
  • Topic Author
  • Offline
  • User
  • I wish I had a tad more patience to do it better!
More
31 Oct 2011 16:29 #486317 by clutch
Replied by clutch on topic Permatex No 1 Gasket Maker is CRAP!
From Wikipedia:

About alcohol

The JB Weld company advises "DO NOT" use alcohol to clean surfaces.[3] Denatured alcohol (ethanol) acts as a thinner for J-B WELD or epoxy, so it drips more or runs into cracks.[1] However, rubbing alcohol (isopropanol and water) should be avoided as a thinner, because of the larger proportions of water.[1]
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...

Please Log in or Create an account to join the conversation.

  • mark1122
  • Offline
  • User
  • Keep twisting it
More
31 Oct 2011 16:38 #486322 by mark1122
Replied by mark1122 on topic Permatex No 1 Gasket Maker is CRAP!
i can tell u from experiance that JB Weld is NOT gas proof, when submerged. i have tried to use it to repair carb parts and it fails.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

  • clutch
  • Topic Author
  • Offline
  • User
  • I wish I had a tad more patience to do it better!
More
31 Oct 2011 16:40 #486323 by clutch
Replied by clutch on topic Permatex No 1 Gasket Maker is CRAP!
ANyone know if neoprene gasket material will hold up against the deathanol?
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...

Please Log in or Create an account to join the conversation.

  • clutch
  • Topic Author
  • Offline
  • User
  • I wish I had a tad more patience to do it better!
More
31 Oct 2011 16:49 #486325 by clutch
Replied by clutch on topic Permatex No 1 Gasket Maker is CRAP!

clutch wrote: ANyone know if neoprene gasket material will hold up against the deathanol?


Nope....


I wonder if my buddy that welds could seal it up for me???
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...

Please Log in or Create an account to join the conversation.

More
31 Oct 2011 17:59 - 18 Feb 2013 18:01 #486333 by martin_csr
Replied by martin_csr on topic -
.
1981 KZ650 Competition Sports and Road
Last edit: 18 Feb 2013 18:01 by martin_csr.

Please Log in or Create an account to join the conversation.

  • clutch
  • Topic Author
  • Offline
  • User
  • I wish I had a tad more patience to do it better!
More
31 Oct 2011 18:01 #486336 by clutch
Replied by clutch on topic Permatex No 1 Gasket Maker is CRAP!
Yes. I already have the parts, yet I'm having issues with leakage. I don't want to go back to the vacuum petcock if I can stop the leak.
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...

Please Log in or Create an account to join the conversation.

  • clutch
  • Topic Author
  • Offline
  • User
  • I wish I had a tad more patience to do it better!
More
31 Oct 2011 18:13 #486337 by clutch
Replied by clutch on topic Permatex No 1 Gasket Maker is CRAP!
I've been searching the web for hours, and so far this is the best thing I've found for info...

iqlearningsystems.com/ethanol/downloads/...%20Compatibility.pdf
Southern Maryland, USA

1980 KZ250 LTD (traded, but still missed)
1982 KZ750 E3 (Cafe Project) (Dyna-S, Dyna Coils, V&H 4-1, K&N Pods, 6 Sigma Jet Kit, Acewell Computer, Woodcraft Clip-ons, Custom Rewire)
1966 A1 Samurai (Restoration Project)

Wish List:
KZ1000 P (For a "touring" bike)
Z1 (need I...

Please Log in or Create an account to join the conversation.

More
31 Oct 2011 18:14 #486338 by 650ed
Replied by 650ed on topic Permatex No 1 Gasket Maker is CRAP!
You shouldn't need any sealer on the gas tank; what are you trying to seal? The petcock (at least on mine) uses an oval rubber O-ring that prevents any leaks. Did you do some homemade mods to the tank? Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Offline
  • User
  • FIX UP YOUR BIKE RIGHT AND CHEAP
More
31 Oct 2011 18:42 #486339 by Motor Head
Replied by Motor Head on topic Permatex No 1 Gasket Maker is CRAP!
You got one of those Pingel Adapter plates that is flat with the 2 bolts and gasket, right?
So which joint is the problem, plate to tank or petcock to adapter?
1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B...

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links