- Posts: 190
- Thank you received: 26
Air Suction System
- havakaw
- Topic Author
- Offline
- User
Less
More
13 Aug 2024 15:51 #903215
by havakaw
'80 KZ 750 LTD-H
'82 KZ 1100 A-2 Shafty (ex-bagger)
Air Suction System was created by havakaw
Ok so we all take all that tubing off and just connect the 2 valve cover ASS caps with a piece of hose or block them off with a rubber cap. Has anyone ever capped off the passageway in the head or upper valve cover with either an actual plug or something? Im asking cause after 20000 miles of having that hose sealed, the carbon build up was huge. I'd like to block off the passageway in the head so the exhaust gas goes out and not fill up the upper valve cover area. Thank you.
'80 KZ 750 LTD-H
'82 KZ 1100 A-2 Shafty (ex-bagger)
Please Log in or Create an account to join the conversation.
- Wookie58
- Offline
- Moderator
Less
More
- Posts: 4177
- Thank you received: 2388
13 Aug 2024 15:55 #903216
by Wookie58
Replied by Wookie58 on topic Air Suction System
If your search posts related to "reed valves" you will find many references to exactly what you are thinkingOk so we all take all that tubing off and just connect the 2 valve cover ASS caps with a piece of hose or block them off with a rubber cap. Has anyone ever capped off the passageway in the head or upper valve cover with either an actual plug or something? Im asking cause after 20000 miles of having that hose sealed, the carbon build up was huge. I'd like to block off the passageway in the head so the exhaust gas goes out and not fill up the upper valve cover area. Thank you.
Please Log in or Create an account to join the conversation.
- Scirocco
- Away
- Premium Member
- Never change a running system
Less
More
- Posts: 4208
- Thank you received: 2080
13 Aug 2024 16:37 - 13 Aug 2024 16:53 #903221
by Scirocco
My 1975 Z 1 B 900 Project
www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
Replied by Scirocco on topic Air Suction System
Get a no-smog valve cover!!!
I sold and ship this one (of a dozen to the USA), valve cover to him years ago for the half of his asking prize
kzrider.com/forum/23-for-sale/620721-kz1...emission-valve-cover
Here are the sale pics.
My Z1B with Z1000 J cyl. head mod.
I sold and ship this one (of a dozen to the USA), valve cover to him years ago for the half of his asking prize
kzrider.com/forum/23-for-sale/620721-kz1...emission-valve-cover
Here are the sale pics.
My Z1B with Z1000 J cyl. head mod.
My 1975 Z 1 B 900 Project
www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
Last edit: 13 Aug 2024 16:53 by Scirocco.
Please Log in or Create an account to join the conversation.
- zed1015
- Offline
- User
Less
More
- Posts: 3033
- Thank you received: 1572
13 Aug 2024 22:54 #903230
by zed1015
No drilling needed as the hole is already the correct size for the tap.
I've also plugged the holes in the cover with a pressed in alloy bung.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-
Replied by zed1015 on topic Air Suction System
Yes! I tap the holes in the head M10 and plug them with a threaded bung.Has anyone ever capped off the passageway in the head or upper valve cover with either an actual plug or something? Thank you.
No drilling needed as the hole is already the correct size for the tap.
I've also plugged the holes in the cover with a pressed in alloy bung.
AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-
The following user(s) said Thank You: ThatGPzGuy
Please Log in or Create an account to join the conversation.
- havakaw
- Topic Author
- Offline
- User
Less
More
- Posts: 190
- Thank you received: 26
16 Aug 2024 12:36 #903339
by havakaw
'80 KZ 750 LTD-H
'82 KZ 1100 A-2 Shafty (ex-bagger)
Replied by havakaw on topic Air Suction System
So that's pretty much what i did. My one mistake was to tap the hole before i had what was going to go in there to plug the hole. I ended up using a 10x1.25 50mm long bolt that i cut and ground to fit. I used my angle grinder and belt sander to get the nearest fit then did a little hand file work to smooth it over so the valve cover didn't get hung up. I hand cut a groove in them to use a screwdriver to get it in tight and some red hi temp rtv to seal the threads. Pics 3 &4 show what i made. I hope this works.
'80 KZ 750 LTD-H
'82 KZ 1100 A-2 Shafty (ex-bagger)
Please Log in or Create an account to join the conversation.
- Wookie58
- Offline
- Moderator
Less
More
- Posts: 4177
- Thank you received: 2388
16 Aug 2024 13:35 #903341
by Wookie58
Replied by Wookie58 on topic Air Suction System
Should do the trick
Please Log in or Create an account to join the conversation.
- TexasKZ
- Offline
- Platinum Member
Less
More
- Posts: 7580
- Thank you received: 2233
16 Aug 2024 13:56 #903342
by TexasKZ
You can also make or purchase flat aluminum covers to replace the top of the reed cage.
kzzone.com/billet.html
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
Replied by TexasKZ on topic Air Suction System
This.
Yes! I tap the holes in the head M10 and plug them with a threaded bung.Has anyone ever capped off the passageway in the head or upper valve cover with either an actual plug or something? Thank you.
No drilling needed as the hole is already the correct size for the tap.
I've also plugged the holes in the cover with a pressed in alloy bung.
You can also make or purchase flat aluminum covers to replace the top of the reed cage.
kzzone.com/billet.html
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
Please Log in or Create an account to join the conversation.
- havakaw
- Topic Author
- Offline
- User
Less
More
- Posts: 190
- Thank you received: 26
16 Aug 2024 18:53 #903352
by havakaw
'80 KZ 750 LTD-H
'82 KZ 1100 A-2 Shafty (ex-bagger)
Replied by havakaw on topic Air Suction System
Sooooo.... Im gonna try to upload my pics again for this cause evidently it didn't
Attachment not found
'80 KZ 750 LTD-H
'82 KZ 1100 A-2 Shafty (ex-bagger)
The following user(s) said Thank You: ThatGPzGuy
Please Log in or Create an account to join the conversation.
- havakaw
- Topic Author
- Offline
- User
Less
More
- Posts: 190
- Thank you received: 26
16 Aug 2024 19:02 #903354
by havakaw
'80 KZ 750 LTD-H
'82 KZ 1100 A-2 Shafty (ex-bagger)
Replied by havakaw on topic Air Suction System
Yeah so like i said.... I hadda make up something to go into the hole i tapped out cause i didn't think to get the plug first...That was to go in the hole first... First wrong move on my part. ... But yeah... It took me 4 hours to get this done and i don't have a machine shop. I did this all kinda caveman style.... But i think it should work out. We will see i guess.......
'80 KZ 750 LTD-H
'82 KZ 1100 A-2 Shafty (ex-bagger)
Please Log in or Create an account to join the conversation.
- Scirocco
- Away
- Premium Member
- Never change a running system
Less
More
- Posts: 4208
- Thank you received: 2080
03 Sep 2024 14:58 #903930
by Scirocco
My 1975 Z 1 B 900 Project
www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
Replied by Scirocco on topic Air Suction System
My 1975 Z 1 B 900 Project
www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
Please Log in or Create an account to join the conversation.