Engine numbers

More
21 Oct 2022 05:15 #875803 by Moosey
Replied by Moosey on topic Engine numbers

This is another one and tuned out to be genuine kawasaki from the 70s sorry this one 
Attachments:

Please Log in or Create an account to join the conversation.

More
21 Oct 2022 07:59 - 21 Oct 2022 08:01 #875809 by Mikaw
Replied by Mikaw on topic Engine numbers
Your most recent picture appears to be a restamped on a 1979 kz1000 LTD. There should be a “0” after the dash before the actual number starts. They ran from 81k through 90k

1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.
Last edit: 21 Oct 2022 08:01 by Mikaw.

Please Log in or Create an account to join the conversation.

More
21 Oct 2022 09:18 #875812 by Moosey
Replied by Moosey on topic Engine numbers
This is what I'm trying to explain As I'm told mine is restamped I'm comparing to this  so it could be real
Attachments:

Please Log in or Create an account to join the conversation.

More
21 Oct 2022 09:38 - 21 Oct 2022 09:39 #875813 by zed1015
Replied by zed1015 on topic Engine numbers

This is what I'm trying to explain As I'm told mine is restamped I'm comparing to this  so it could be real
That letter is only confirming that it's a genuine engine number for a z1000 but not that the stamp is original.
Only the early Z1 with short number block had no raised edge so that would show that the 1000 is also a restamp but uses genuine numbers.
This is probably because the cases or complete engine are replacements or the bike was bought without an engine and the numbers were added to match the frames reg doc rather than muck about with the DVLA etc.
Your 650 is 100% restamped with numbers that do not match any Z650 model.
It's been made up to get the bike registered without the chance of the same number being on another bike and it being flagged up.

 

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-





Last edit: 21 Oct 2022 09:39 by zed1015.

Please Log in or Create an account to join the conversation.

More
21 Oct 2022 10:20 #875815 by Moosey
Replied by Moosey on topic Engine numbers
Cheers for that imfo 
I'm actually not bothered about re stamp etc 
Was trying to find out what engine I had 
Thanks for your knowledge appreciated 

Please Log in or Create an account to join the conversation.

More
21 Oct 2022 10:57 #875816 by zed1015
Replied by zed1015 on topic Engine numbers

Cheers for that imfo 
Was trying to find out what engine I had 

 
Look to see what type of camchain is fitted .
If it's a roller type the engine is pre 1980.
If it's Hyvo it's 1979 onwards.
There are other tell tale signs such as generator type etc.

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-





Please Log in or Create an account to join the conversation.

More
21 Oct 2022 11:04 #875817 by Moosey
Replied by Moosey on topic Engine numbers
OK thanks 

Please Log in or Create an account to join the conversation.

More
21 Oct 2022 14:43 - 21 Oct 2022 14:43 #875823 by martin_csr
Replied by martin_csr on topic Engine numbers
In the USA the 1981-83 KZ650-CSR had a HyVo cam chain w rubber slipper guides, 3-phase alternator & electronic ignition. The earlier 650s had a roller cam chain w roller guides, 2-phase alternator & points ignition.  A 2-phase has 2 yellow wires going to the voltage regulator, while the 3-phase has 3 yellow wires. It may be that some 1980 USA models had either/or on some of that stuff. not sure. 1980 was kind of a transition year from the 70s type of components on some models.

ps:  for Euro models you can try the diagrams at Cmsnl.com.
Last edit: 21 Oct 2022 14:43 by martin_csr.

Please Log in or Create an account to join the conversation.

More
21 Oct 2022 15:04 #875824 by urankjj
Replied by urankjj on topic Engine numbers
For what it's worth, I still have my original title, issued in the states, (Alaska 1986), and the model # is blank. I've always wondered why ?

Please Log in or Create an account to join the conversation.

More
21 Oct 2022 19:25 - 22 Oct 2022 03:45 #875830 by Injected
Replied by Injected on topic Engine numbers

1982 KZ650 "CSR"

1978 KZ650 "B2"

1977 KZ650 "C1"
Last edit: 22 Oct 2022 03:45 by Injected.

Please Log in or Create an account to join the conversation.

More
22 Oct 2022 13:31 #875849 by rstnick
Replied by rstnick on topic Engine numbers
Got a picture of the whole engine and bike?

 

Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, Progressive Suspension, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s

Please Log in or Create an account to join the conversation.

More
23 Oct 2022 05:09 #875857 by Moosey
Replied by Moosey on topic Engine numbers
Any idea why that is? 

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum