ZX7/Z1 Oil Cooler

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
18 Nov 2015 14:46 - 19 Nov 2015 03:32 #699256 by SWest
ZX7/Z1 Oil Cooler was created by SWest
Started playing with it yesterday afternoon. It won't work up side down as I planned. Too big. The top bolt was no problem but the bottom ones I had to make a bracket for. I have some 6.37mm aluminum flat bar stock, so I used that. This stuff is HARD. I;ll have to go flexable lines to criss/cross under it, then behind the steering head, along the back bone tubes, then down between the 2-3 intake boots. 3/8 line all the way. I have a line connecting the inlets to keep out dirt for now. Looking for a 3/8 bypass valve. Should be ready for summer. B)
Looking at the pics, I need to do some polishing. :(
Steve





Attachments:
Last edit: 19 Nov 2015 03:32 by SWest.

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
20 Nov 2015 13:45 #699648 by SWest
Replied by SWest on topic ZX7/Z1 Oil Cooler
This is my old cooler. You can see why I didn't use it.
Steve

Attachments:

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
21 Nov 2015 08:35 #699768 by SWest
Replied by SWest on topic ZX7/Z1 Oil Cooler
No eBay APP ID and/or Cert ID defined in Kunena configurationNow this would be ideal.
Steve


Attachments:

Please Log in or Create an account to join the conversation.

More
21 Nov 2015 08:48 - 21 Nov 2015 14:06 #699773 by zed1015
Replied by zed1015 on topic ZX7/Z1 Oil Cooler

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-





Last edit: 21 Nov 2015 14:06 by zed1015.

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
21 Nov 2015 08:55 #699775 by SWest

Please Log in or Create an account to join the conversation.

More
21 Nov 2015 11:37 - 21 Nov 2015 11:38 #699803 by Nessism
Replied by Nessism on topic ZX7/Z1 Oil Cooler
Still trying to catch my breath after seeing the price of that IMPROVED Racing thermostat. :ohmy:

Those "Mocal" thermostats have been around a while and I think, sold under more than one name. Price is MUCH better obviously.
Last edit: 21 Nov 2015 11:38 by Nessism.

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
21 Nov 2015 12:22 #699817 by SWest
Replied by SWest on topic ZX7/Z1 Oil Cooler
You're right. Been looking at three way valves. That one for $37 is doable. Ed, do you know off hand what size fittings are on the cooler? I'd like to have larger inlets.
Steve

Please Log in or Create an account to join the conversation.

More
21 Nov 2015 12:32 #699821 by floivanus
Replied by floivanus on topic ZX7/Z1 Oil Cooler
No eBay APP ID and/or Cert ID defined in Kunena configuration

my bikes; 80kz1000(project), 77 gl1000, 74 h2 (project)
Past; 78 kz1000, 83 kz550
Andrew

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
21 Nov 2015 13:02 #699828 by SWest
Replied by SWest on topic ZX7/Z1 Oil Cooler
That's even better. Almost local .Cool looking too. I saved it. ;)
Steve

Please Log in or Create an account to join the conversation.

More
21 Nov 2015 13:44 - 21 Nov 2015 14:08 #699842 by zed1015
Replied by zed1015 on topic ZX7/Z1 Oil Cooler
No eBay APP ID and/or Cert ID defined in Kunena configuration

floivanus wrote:

swest wrote: That's even better. Almost local .Cool looking too. I saved it. ;)
Steve


Those 3/8ths couplings are a little too small.
Remember KZ's are high volume - low pressure so 1/2 inch /13mm is the size you need or you will have trouble.
That bypass is intended for higher pressure systems.

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-





Last edit: 21 Nov 2015 14:08 by zed1015.
The following user(s) said Thank You: bluezbike

Please Log in or Create an account to join the conversation.

More
21 Nov 2015 14:01 #699844 by Nessism
Replied by Nessism on topic ZX7/Z1 Oil Cooler

swest wrote: You're right. Been looking at three way valves. That one for $37 is doable. Ed, do you know off hand what size fittings are on the cooler? I'd like to have larger inlets.
Steve


Sorry Steve, I don't know the flare size. All I know is they are quite large.

Please Log in or Create an account to join the conversation.

  • SWest
  • Topic Author
  • Offline
  • Sustaining Member
  • 10 22 2014
More
21 Nov 2015 14:43 #699846 by SWest
Replied by SWest on topic ZX7/Z1 Oil Cooler
No eBay APP ID and/or Cert ID defined in Kunena configurationI've got it worked out. The old cooler had 1/2" inlets. I have some fittings off a FI fuel pressure regulator that will fit. I can drill them out and fit 1/2" barbs on them. These are the fittings I plan on getting off eBay. I was thinking the same thing. 3/8" is too small.

The fittings I had before were for 1/2".
Steve
The following user(s) said Thank You: 750Kruzer

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum