Lost a Giant

Injected
Topic Author
Offline
User

10 Apr 2023 13:19 #882866 by Injected

Lost a Giant was created by Injected

RIP Sandy Kosman.

While I did not know him I talked with him on the phone a couple of times back in 1994 when I was interested in buying a drag race swing arm. He was a very nice guy and actually talked me out of buying one of his because at that time it was a custom job. He mailed me all the literature he had at the time and I ended up copying one of his road race arms from the pictures he sent.

www.roadracingworld.com/news/r-i-p-motor...signer-sandy-kosman/

www.dragbike.com/top-fuel-motorcycle-legend-sanford-kosman/

The following user(s) said Thank You: riturbo, SWest, Dragbike_Mike, Wookie58

Please Log in or Create an account to join the conversation.

Street Fighter LTD
Away
Moderator
TURBO, Its Better to be Blown than Injected

10 Apr 2023 18:42 #882884 by Street Fighter LTD

Replied by Street Fighter LTD on topic Lost a Giant

Sandy was really something special .We spoke of this last year when it happened .He built my teams two chassis . One Funnybike with a 8 inch tire and the 2nd a 12 inch tire frame .Here are a few pictures I had handyRIP Sandy and Bill Hahn too for that matterDave

Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

rivman15
Offline
User

11 Apr 2023 04:09 #882897 by rivman15

Replied by rivman15 on topic Lost a Giant

He split and widened a original 16 inch rear mag wheel off a kz1000 back in the day, He made it six inches wide for a bigger tire, I still have it. Incredible work. RIP.

Please Log in or Create an account to join the conversation.

Injected
Topic Author
Offline
User

11 Apr 2023 05:16 - 11 Apr 2023 05:17 #882905 by Injected

Replied by Injected on topic Lost a Giant

rivman15 wrote:
He split and widened a original 16 inch rear mag wheel off a kz1000 back in the day, He made it six inches wide for a bigger tire, I still have it. Incredible work. RIP.

He was the originator of that technique, he use to sell SUN brand rims that he widened to hold 7" slicks. The best welds I have ever seen!

A extremely smart and talented fabricator.

Last edit: 11 Apr 2023 05:17 by Injected.

Please Log in or Create an account to join the conversation.

MotorcycleMechanic86
Visitor

11 Jul 2023 06:22 #887086 by MotorcycleMechanic86

Replied by MotorcycleMechanic86 on topic Lost a Giant

Ugh that’s sad! I just seen a kosman framed drag bike for sale the other day on Facebook marketplace. I believe it said #001 frame number. I’ll have to go look and see if I can find it.

Please Log in or Create an account to join the conversation.

zed1015
Offline
User

11 Jul 2023 06:31 - 11 Jul 2023 06:37 #887087 by zed1015

Replied by zed1015 on topic Lost a Giant

Our Kosman that i rebuilt a few years ago for the nostalgia drags.
I found no frame numbers on it though..

I'm building a Z1R road bike with the exhaust routeing based on it just to be different.

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-

Last edit: 11 Jul 2023 06:37 by zed1015.

The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

MotorcycleMechanic86
Visitor

11 Jul 2023 06:35 - 11 Jul 2023 09:15 #887090 by MotorcycleMechanic86

Replied by MotorcycleMechanic86 on topic Lost a Giant

Here is the ad.

Last edit: 11 Jul 2023 09:15 by Street Fighter LTD.

Please Log in or Create an account to join the conversation.

Injected
Topic Author
Offline
User

11 Jul 2023 06:37 - 11 Jul 2023 06:41 #887091 by Injected

Replied by Injected on topic Lost a Giant

zed1015 wrote:
Our Kosman that i rebuilt a few years ago for the nostalgia drags.
I found no frame numbers on it though..

He made a lot of that type of frame lay down over the years, each one is probably a little unique on its own even if it was not numbered.

Last edit: 11 Jul 2023 06:41 by Injected. Reason: sp

Please Log in or Create an account to join the conversation.

zed1015
Offline
User

11 Jul 2023 06:41 #887094 by zed1015

Replied by zed1015 on topic Lost a Giant

Injected wrote:

zed1015 wrote:
Our Kosman that i rebuilt a few years ago for the nostalgia drags.
I found no frame numbers on it though..

He made a lot of that type of frame over the years, each one is probably a little unique on its own.

Yes! I've never seen two that are identical.

AIR CORRECTOR JETS FOR VM CARBS AND ETHANOL RESISTANT VITON CHOKE PLUNGER SEAL REPLACMENT FOR ALL CLASSIC AND MODERN MOTORCYCLE CARBURETTORS
kzrider.com/forum/23-for-sale/611992-air-corrector-jets-

Please Log in or Create an account to join the conversation.

Injected
Topic Author
Offline
User

11 Jul 2023 06:45 - 11 Jul 2023 06:47 #887096 by Injected

Replied by Injected on topic Lost a Giant

Sandy pioneered back bone and back half conversions of stock frames as well as "club foot" swing arms. Once people started to copy his efforts he started making more frames from scratch.

Last edit: 11 Jul 2023 06:47 by Injected. Reason: sp

Please Log in or Create an account to join the conversation.

MotorcycleMechanic86
Visitor

11 Jul 2023 06:46 #887097 by MotorcycleMechanic86

Replied by MotorcycleMechanic86 on topic Lost a Giant

Do you think the pics i posted are really #1 framed kosman?

Please Log in or Create an account to join the conversation.

Injected
Topic Author
Offline
User

11 Jul 2023 06:48 #887098 by Injected

Replied by Injected on topic Lost a Giant

MotorcycleMechanic86 wrote:
Do you think the pics i posted are really #1 framed kosman?

Probably not, he would have stamped one in or made a alloy number plate riveted.

Please Log in or Create an account to join the conversation.

Lost a Giant

Forum Links