My 83 GPz 550

More
10 May 2016 18:17 #725610 by HankSD
My 83 GPz 550 was created by HankSD
A while back I asked for some carb help here, and got it, which was much appreciated.
Since then I've finished getting the old girl road worthy. I runs like a top!
Everything works as it should, even the LCD dash stuff. Its complete, and original minus the bar end mirrors and the V&H pipe.
Its got 11,000 on it.

Its definitely a "10" (looks OK from 10 feet), has about a million small cosmetic issues. I don't mind a bit though as its a pretty darn enjoyable daily rider. Looking nationally on Craigslist, I'm surprised how rare original / complete ones are, considering how many were sold. The ones that are out there seem grossly over priced.

[IMG


[IMG

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
10 May 2016 18:22 #725612 by SWest

Please Log in or Create an account to join the conversation.

  • ThatGPzGuy
  • Offline
  • Sustaining Member
  • More Sparky than Speed Racer
More
11 May 2016 03:53 #725662 by ThatGPzGuy
Replied by ThatGPzGuy on topic My 83 GPz 550
Looks like the one I had in college in San Diego. What a great bike.
Nice job.

Jim
North GA
2016 Yamaha FJR1300ES
1982 GPz750 R1
1974 Kawasaki H1
1976 Kawasaki KZ400
1979 Yamaha XS650 cafe'
2001 KZ1000P
2001 Yamaha YZ426
1981 Honda XR200 stroked in an '89 CR125 chassis
1965 Mustang
1967 Triumph GT6
1976 Bronco
"If you didn't build it, it's not really yours"

Please Log in or Create an account to join the conversation.

More
11 May 2016 05:24 #725674 by 650ed
Replied by 650ed on topic My 83 GPz 550
Very nice; and I'm glad to see you're keeping it original! You're right; there are very few original KZ / GPZ bikes still out there. I haven't seen another one in my area for many years. That's why I hate to see nice, original examples chopped up for projects which more often than not are abandoned. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
11 May 2016 06:02 #725679 by HankSD
Replied by HankSD on topic My 83 GPz 550
I'm going to sand and repaint the engine covers that have some rash, and probably sand blast and paint the exhaust.
One side cover has a crack that wasn't fixed real well and I could definitely improve that. I'll keep picking away at it to make it prettier.
Maybe next winter I'll powder coat the frame and think about a paint job if I can keep it original colors.

Please Log in or Create an account to join the conversation.

  • CoreyClough
  • Offline
  • User
  • GPz550 Addiction
More
11 May 2016 07:19 #725698 by CoreyClough
Replied by CoreyClough on topic My 83 GPz 550
Looks very nice!!!

'85 GPz550(ZX550-A2)

GPz550 Base Manual --> tinyurl.com/ze5b3qo
GPz550 Supplement Manual --> tinyurl.com/h34d2o6
GPz550.com --> www.nwsca.com/scripts/gpz_forum_2005/default.asp
First Race Win GPz550 --> tinyurl.com/o5y3ftp

Please Log in or Create an account to join the conversation.

More
16 May 2016 15:51 #726844 by HankSD
Replied by HankSD on topic My 83 GPz 550
Here's a question: On the left front frame downtube, near the header and clutch cable, there is a little stub tube that points up at an angle away from the frame. What the heck is that for?

And thanks for the comments!

Please Log in or Create an account to join the conversation.

  • CoreyClough
  • Offline
  • User
  • GPz550 Addiction
More
16 May 2016 17:16 #726858 by CoreyClough
Replied by CoreyClough on topic My 83 GPz 550
That was for the accessory cable that would allow you to lock the front wheel.


'85 GPz550(ZX550-A2)

GPz550 Base Manual --> tinyurl.com/ze5b3qo
GPz550 Supplement Manual --> tinyurl.com/h34d2o6
GPz550.com --> www.nwsca.com/scripts/gpz_forum_2005/default.asp
First Race Win GPz550 --> tinyurl.com/o5y3ftp

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum