82 kz650 csr

More
10 Oct 2015 15:36 #694080 by jeffo
82 kz650 csr was created by jeffo
Practically stole this bike today. I got it for the seat and exhaust. Kerker 4 to 1 for my 81 kz650 810 build. My brother wants a bike and this one will fit the ticket. Not currently running. PO said may be compression or timing issue....they seem totally unrelated. Will get into it tomorrow a little. May need some help on this one...

Agenda:
1. Change to stock exhaust.
2. Install 81kz650 air box? Or keep pods. The kerker headers are pretty blue I think the carbs are a little lean...
3. Change damaged engine side cover.
4. Swap seat with the 81 kz650. The cover is nicer and seems to have some more padding.
5. Repair odometer. The shell looks repaired after a lay down. I happen to have some spare parts...
6. Switch tank to spare black tank. This one has some poor repairs....
7. Paint side covers black.
8. Change out headlight bezel (anyone have one?)
9. Get it running! (Mabe that should be first...)

1981 KZ650H1 CSR

Please Log in or Create an account to join the conversation.

More
11 Oct 2015 03:54 - 11 Oct 2015 03:55 #694119 by GPzMOD750
Replied by GPzMOD750 on topic 82 kz650 csr
Hey! I linked that bike in the Clist/Ebay thread!

Glad someone ended up with it that will put it right. I'm doing a brother project too that I got off KSL.

Where are you located? I'm in Sandy, maybe meet up and hit a canyon or 2?
Last edit: 11 Oct 2015 03:55 by GPzMOD750.

Please Log in or Create an account to join the conversation.

More
11 Oct 2015 04:09 #694123 by jeffo
Replied by jeffo on topic Re:82 kz650 csr

GPzMOD750 wrote: Hey! I linked that bike in the Clist/Ebay thread!

Glad someone ended up with it that will put it right. I'm doing a brother project too that I got off KSL.

Where are you located? I'm in Sandy, maybe meet up and hit a canyon or 2?

Would love to go for a ride. I need to get some bikes running first. I also live in Sandy.

My bike has been apart a while but I should have it up and running by the spring. As for this one I may be able to get it going but I don't think it's something simple so it may be a winter project as well....

I attached a picture of my soon to be 810 ....you can see I have my work cut out for me.

1981 KZ650H1 CSR
Attachments:

Please Log in or Create an account to join the conversation.

More
11 Oct 2015 04:26 - 11 Oct 2015 04:28 #694125 by GPzMOD750
Replied by GPzMOD750 on topic 82 kz650 csr
Don't have runner right now? Bummer!

I'll probably run up Big C today after i get my garage cleaned up. My project got sidetracked by my kid's Cherokee head gasket or it probably would be running by now.

I'll PM you later. It'd be nice to meet a local KZ wrencher. Back to on topic. :)
Last edit: 11 Oct 2015 04:28 by GPzMOD750.

Please Log in or Create an account to join the conversation.

More
11 Oct 2015 07:33 - 11 Oct 2015 07:34 #694133 by GPzMOD750
Last edit: 11 Oct 2015 07:34 by GPzMOD750.

Please Log in or Create an account to join the conversation.

More
11 Oct 2015 07:35 #694134 by jeffo
Replied by jeffo on topic Re:82 kz650 csr

GPzMOD750 wrote: Here ya go.

1978 kz650 stock full exhaust pipes

I have the exhaust from my 81. The 81 is going in the 82 and the kerker's are going on the 81.

1981 KZ650H1 CSR

Please Log in or Create an account to join the conversation.

More
11 Oct 2015 11:58 #694154 by GPzMOD750
Replied by GPzMOD750 on topic Re:82 kz650 csr
Sounds good.

Please Log in or Create an account to join the conversation.

More
11 Oct 2015 13:08 #694166 by martin_csr
Replied by martin_csr on topic 82 kz650 csr

GPzMOD750 wrote: Here ya go.

1978 kz650 stock full exhaust pipes

The center stand on the 650-CSR will probably bang against the left side muffler. The stock csr LH muffler has a recess for clearance, but the 70s 650 mufflers don't.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum