The Mosquito!

More
24 Feb 2011 13:31 #433147 by scott s
Replied by scott s on topic The Mosquito!
I just degreased the wheels, scrubbed them with a wire brush and taped them off. I polished the chrome rim with 0000 steel wool and Windex, followed by a coat of chrome/aluminum polish.
For paint, I used Duplicolor Chrome paint.

Please Log in or Create an account to join the conversation.

More
25 Feb 2011 12:32 #433379 by scott s
Replied by scott s on topic The Mosquito!
Tires showed up today, so we dropped off the rims to have them mounted and balanced.
Cleaned up the brakes, greased all the pivot points, packed the wheel bearings and installed new pads.
Rear:


Front:

Please Log in or Create an account to join the conversation.

More
05 Mar 2011 05:27 #435117 by scott s
Replied by scott s on topic The Mosquito!
We changed the fork oil, polished up the lowers and isntalled fork gaitors.

Please Log in or Create an account to join the conversation.

More
05 Mar 2011 05:31 #435119 by scott s
Replied by scott s on topic The Mosquito!
Here's a shot of the two frames (one titled, one from a parts bike) showing the changes we made.
In the early '80's, nearly every Japanese motorcycle supplier went for the 'cruiser' look. We had to do some chopping and reinforcing to get the frame level for the cafe' racer look we wanted. It's probably stronger now than before.

Please Log in or Create an account to join the conversation.

More
05 Mar 2011 05:33 #435120 by scott s
Replied by scott s on topic The Mosquito!
Here's the coil mount my Dad fabbed up and a shot of the modified tank mounts (to mount the Suzuki TS tank to the KZ frame).

Please Log in or Create an account to join the conversation.

More
05 Mar 2011 05:44 #435122 by scott s
Replied by scott s on topic The Mosquito!
Worked on the placement of the electrics. This bike had been left outside, unprotected, for who know's how long. The P.O. had severely chopped up the wiring, too.
We'll be stripping it down to the bare minimum and going through it front to back.

Please Log in or Create an account to join the conversation.

More
05 Mar 2011 05:49 #435123 by scott s
Replied by scott s on topic The Mosquito!
And she's a roller again!
I went with a taller, narrower tire on the rear. Again, trying to lose some of the "cruiser" look. The guys at www.smalltires.com were a BIG help. Affordable, too...only $108 shipped for two tires and two tubes!



Please Log in or Create an account to join the conversation.

More
05 Mar 2011 05:52 #435124 by scott s
Replied by scott s on topic The Mosquito!
I had some rear-sets for the bike, but the frame is just TOO small. I'm 6'1", and when we mocked up the rear-sets, I just about dislocated my hip trying to fit.
We'll be using the stock foot pegs and controls. Doesn't look too bad and greatly simplifies brake/shifter fitment. It also allows me to slide back against the bum stop.

Please Log in or Create an account to join the conversation.

More
05 Mar 2011 05:53 #435125 by scott s
Replied by scott s on topic The Mosquito!
My girlfriend had been out on her FJ600 and pulled in as we were taking pics. She couldn't help but strike a pose, too.

Please Log in or Create an account to join the conversation.

More
05 Mar 2011 06:35 #435127 by Topper
Replied by Topper on topic The Mosquito!
No offense, but she looks way better on the bike than you. ;)

Permanent and perpetual noob.

1979 KZ750 Twin
2009 Kawasaki Versys

Please Log in or Create an account to join the conversation.

More
05 Mar 2011 08:06 #435147 by scott s
Replied by scott s on topic The Mosquito!
Topper wrote:

No offense, but she looks way better on the bike than you. ;)


None taken....I totally agree.

Please Log in or Create an account to join the conversation.

More
05 Mar 2011 16:02 #435273 by scott s
Replied by scott s on topic The Mosquito!
To get rear sets on this thing, I'd have to fab up a bracket to mount them WAY back.... Draw a vertical line down from the upper shock bolt. That's about where they'd need to be to get me to fit on it. Too much or ???

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum