should I cut here?

More
12 May 2010 04:05 #367386 by btkz650
should I cut here? was created by btkz650
I'm building a bobber and want to fit a peanut tank to my kz1000 frame but the frame is in the way of the petcock. Does anyone know if I cut a section out (shown in yellow on the attached) and weld another piece going from the lower section to the top section much like the factory did just to the right of the yellow, would that be strong enough? I'm just not sure how structural the two lower pieces are since they are tied to the top section of the backbone.
720
Attachments:

Please Log in or Create an account to join the conversation.

More
12 May 2010 04:16 #367389 by Jodyb17
Replied by Jodyb17 on topic should I cut here?
I am pretty sure that bar is structural. The backbone actually connects to the side bars in term of force resistance. Not sure how effective moving the connection location would be.

Is the tank painted already? I would think it easier to modify the tank or tank mounts than the frame. Make sure you have all the gas out before you put heat to it.
1977 KZ 650 C

Please Log in or Create an account to join the conversation.

More
12 May 2010 08:20 #367419 by PLUMMEN
Replied by PLUMMEN on topic should I cut here?
1024
nooooooooooooooooooo!
Still recovering,some days are better than others.
Attachments:

Please Log in or Create an account to join the conversation.

More
12 May 2010 08:45 - 12 May 2010 08:46 #367423 by otakar
Replied by otakar on topic should I cut here?
You can cut anywhere your Lil-Ol-Fuzzy-Heart desires. I just don't want to be around when you ride it. And if I am, I want to be in front of you. :ohmy:
74 Z1-A stock
76 KZ-900 Totaly stock vice MAC pipe
77 KZ-1000A stock
78 Z1-R 100%MINT 500 original Mi.
78 Z1-R Yoshi 1103 kit stage 1 cams Yoshi pipe. Etc
79 KZ-1300 (1400)
80 KZ-1300
81 Scratch built GPz1150R
82 KZ1000
Last edit: 12 May 2010 08:46 by otakar.

Please Log in or Create an account to join the conversation.

More
12 May 2010 09:23 #367431 by 650ed
Replied by 650ed on topic should I cut here?
Flexible flyer.
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • Offline
  • User
  • New and improved - extra strength
More
12 May 2010 09:27 #367435 by trianglelaguna
Replied by trianglelaguna on topic should I cut here?
absolutely.......in fact......when researching things that may cost me my very life...i often seek out the advice of internet strangers.....
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • Offline
  • User
  • New and improved - extra strength
More
12 May 2010 09:33 #367439 by trianglelaguna
Replied by trianglelaguna on topic should I cut here?
no
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife

Please Log in or Create an account to join the conversation.

More
12 May 2010 10:36 #367449 by btkz650
Replied by btkz650 on topic should I cut here?
Okay okay, I get it. It was a really ridiculously stupid question. Guess I already knew the answer but was hoping to hear something that would allow me to use the tank I just bought. I've seen them used on other similar KZ and GS bobber projects and thought it would fit, but they must have done something different to make it work. Must have relocated the petcock on the tank is all I can figure.

Please Log in or Create an account to join the conversation.

  • 9am53
  • Offline
  • User
  • homebrew, and some bbq
More
12 May 2010 11:12 #367456 by 9am53
Replied by 9am53 on topic should I cut here?
...said the rabbi
'84 GPz900r
'71 CB350


s289.photobucket.com/albums/ll231/9am53/

Please Log in or Create an account to join the conversation.

More
12 May 2010 12:44 #367470 by 650ed
Replied by 650ed on topic should I cut here?
btkz650 wrote:

It was a really ridiculously stupid question.


Not really. It would only have been a stupid question if you had asked it after cutting the frame. ;)
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
12 May 2010 14:17 #367494 by 531blackbanshee
Replied by 531blackbanshee on topic should I cut here?
ask wompy if he can tell you how his was modded to fit.

jpriderdesigns.blogspot.com/?zx=63af4195b5a9da86

he has a chopped 650 with the same kinda tank.
hth,
leon
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!

billybiltit.blogspot.com/

www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work

kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0

Please Log in or Create an account to join the conversation.

  • TeK9iNe
  • Offline
  • User
  • What did you do!?!
More
12 May 2010 14:19 #367495 by TeK9iNe
Replied by TeK9iNe on topic should I cut here?
trianglelaguna wrote:

absolutely.......in fact......when researching things that may cost me my very life...i often seek out the advice of internet strangers.....


:laugh: :laugh: :laugh: :silly:

B)
Motorcycle Shop Owner/Operator

79 Kawie Z1000 LTD
81 Kawie Z1000 CSR
83 Honda VT750C A
85 Kawie GPZ900 A2
86 Zukie GS1150 EG
93 Yamie XV1100 E
Lucky to have rolled many old bikes through my doors ;)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links