replacement gauge faces

  • Zaddict
  • Topic Author
  • Offline
  • User
  • Enjoying my Zaddiction!
More
16 Sep 2016 20:58 #742578 by Zaddict
replacement gauge faces was created by Zaddict
Have any of you replaced the faces on your speedometer or tach? Mine are getting pretty faded. I can't seem to find much info on replacing them. Maybe it's not something people usually do.
1990 Zephyr zr550 B1
Wiseco 615cc kit
zx550 cams
SPII ignition system
Kerker stainless steel race exhaust with 1.5" competition baffle
K&N Air Filter...

Please Log in or Create an account to join the conversation.

More
16 Sep 2016 21:54 #742580 by Patton
Replied by Patton on topic replacement gauge faces
Click here > www.kzrider.com/forum/5-chassis/348485-g...ration-decals#348485

Good Fortune! :)
1973 Z1
KZ900 LTD

Please Log in or Create an account to join the conversation.

More
17 Sep 2016 00:37 #742588 by davido
Replied by davido on topic replacement gauge faces
One of mine was craked so I took the other to a glass shop and had a couple of new ones cut to the right size. Easy peasy.
www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

More
17 Sep 2016 03:55 #742590 by martin_csr
Replied by martin_csr on topic replacement gauge faces
Is this for the 550 Zephyr? If so, the meters should be easy to open, but I have no idea if new faces are available.
1981 KZ650 Competition Sports and Road

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
17 Sep 2016 06:36 #742593 by SWest
Replied by SWest on topic replacement gauge faces
I got two new ones on eBay. The toughest part is getting the needles off. I broke two spindles by prying up so now I twist them off.
Steve
kzrider.com/forum/5-chassis/599078-tach-speedo-rebuild
kzrider.com/forum/5-chassis/599906-new-tach-speedo
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
17 Sep 2016 08:01 #742596 by martin_csr
Replied by martin_csr on topic replacement gauge faces
Some guys have had luck prying the needle with a couple of spoons.
1981 KZ650 Competition Sports and Road

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
17 Sep 2016 08:13 #742598 by SWest
Replied by SWest on topic replacement gauge faces
The top of the spindle is the thickness of a paperclip. That's the part that broke off on two of them. I had good luck before but those two were ruined beyond repair.
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
17 Sep 2016 08:23 #742599 by davido
Replied by davido on topic replacement gauge faces
Sorry,I misunderstood. I thought you were talking about the glass.
www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

  • Zaddict
  • Topic Author
  • Offline
  • User
  • Enjoying my Zaddiction!
More
17 Sep 2016 08:29 #742600 by Zaddict
Replied by Zaddict on topic replacement gauge faces

martin_csr wrote: Is this for the 550 Zephyr? If so, the meters should be easy to open, but I have no idea if new faces are available.


Yes. Good to know it's pretty easy/common with other bikes. Need to find decals for my zr550, if they exist.
1990 Zephyr zr550 B1
Wiseco 615cc kit
zx550 cams
SPII ignition system
Kerker stainless steel race exhaust with 1.5" competition baffle
K&N Air Filter...

Please Log in or Create an account to join the conversation.

More
17 Sep 2016 08:56 - 17 Sep 2016 08:58 #742603 by Patton
Replied by Patton on topic replacement gauge faces
Zaddict wrote:
I have no idea if new faces are available.
Need to find decals for my zr550, if they exist.


Am guessing that other models might have the same or acceptably similar instrument face decals.

If not already done, would inquire of Diablo Cycle (owned and operated by the people at Reproduction Decals) and/or Reproduction Decals.

E-mail: sales@reproductiondecals.com or sales@diablocycle.com • Tel: 519 668-7152

Fax: 519 690-0774

www.diablocycle.com/home.php

www.reproductiondecals.com/default_frame...info_instr.html~main

Good Fortune! :)
1973 Z1
KZ900 LTD
Last edit: 17 Sep 2016 08:58 by Patton.

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
17 Sep 2016 09:19 #742605 by SWest
Replied by SWest on topic replacement gauge faces
No eBay APP ID and/or Cert ID defined in Kunena configurationI bought the actual face plates. You might try these folks to see if they have one for your bike. There are others as well.
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

  • Zaddict
  • Topic Author
  • Offline
  • User
  • Enjoying my Zaddiction!
More
17 Sep 2016 16:21 #742653 by Zaddict
Replied by Zaddict on topic replacement gauge faces
Great tips - thanks all!
1990 Zephyr zr550 B1
Wiseco 615cc kit
zx550 cams
SPII ignition system
Kerker stainless steel race exhaust with 1.5" competition baffle
K&N Air Filter...

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links